LAUNCH X431 Creader CRP919E Code Reader OBD2 Scanner Full System Diagnostic Tools 2 Years Free Update
A/F TPMS DPF IMMO 31 Reset +CANFD For GM after 2020 / DIOP + Active Test + 11 Languages
LAUNCH X431 Creader CRP919E Code Reader OBD2 Scanner Full System Diagnostic Tools 2 Years Free Update
A/F TPMS DPF IMMO 31 Reset +CANFD For GM after 2020 / DIOP + Active Test + 11 Languages
New Elite Version. All-around upgraded of LAUNCH CRP909/909x/909e
Supports 11 Languages: It supports 11 languages, including English, French, Italian, Japanese, Spanish, German, Russian, Portuguese, Korean, Traditional Chinese, and Polish.
BETTER Settings: top-of-the-line software & hardware of the same product range:
FOR EXAMPLE: If the vapor emission system failure may be due to the EVAP cleaning valve may have been opened or closed after being stuck or short circuit, you can use our LAUNCH 919E scanner to send the command to the vehicle ECU to perform EVAP tests, then diagnose the DTC and read the data stream. Can determine which part of the circuit, control unit, and actuator fails through comparative analysis.
Commonly-Used Active Tests including:
- EVAP Vent / Purge Solenoid;
- Fuel Injector Test;
- Cycling A/C Clutch Relay;
- Cycling ABS Motor Pump;
- Cooling Fan Test;
- Window/Light/Door Lock Actuators/Headlamp Test/Sunroof/Operate mirrors/Turn on the sound horn;
And also can perform other actuation test functions including Modulate the throttle,Turn Off ACC Lane Keeping Assist System (LKAS) ; Turn ON/OFF Front and Rear side ACM Solenoid, Left clutch electromagnetic coil test,Acceleration Device Test,Oil Pressure Control Test DYNAMIC camera aiming,Brake Vacuum Pump, Inlet and Outlet Valve tests, Open Brakes tests, Parking Brake Motors, Wheel Speed Sensor Supply, PARKING BRAKE tests, etc.
*Actuation test functions vary by the vehicle system.
-ISO 14230-4 (KWP2000)
-ISO 11898-1:2015(CAN-FD)
-ISO 13400( DoIP)
-ISO 15765-4 (CAN)
-ISO 9141-2 (ISO)
-ISO 14229 (UDS)
-SAEJ 1850 (VPW & PWM)
LAUNCH CRP919E automotive scanner Read and erase codes for all available systems, turn off MIL light (Indicator light), display live data in text, graph & analog for easy data review.
Engines
Auto Transmission
Airbags
Immobilizer
ABS ESP system
Cruise Control system
Gateway
Body Systems
Steering system
TPMS system
Rain Sensors
4WD System Stabilizer
Intelligent Parking Assist
Audio Radio Systems
Air Conditioning
Central Locking
Electric Windows
Heated Rear Window
Xenon Headlights
Wash Wipe
Fuel Burning Heater
Seat & Door Motor system
Electronic Throttle system
Electronic Spark System ......
1. Steering Angle Reset
Reset the steering angle to zero to keep the car running straight.
2. Injector Coding
Write the new injector code into the car system for the correct cylinder injection quantity.
3. IMMO Matching
Disable any lost keys and add new keys. **ONLY for cars with an easy IMMO system.
4. DPF Regeneration
Especially works for D-P-F system with D-P-F regeneration, D-P-F component replacement teach-in and D-P-F teach-in after replacing the engine control unit.
5. A/C relearn
The vehicle air conditioner replaces the electronic control unit, replaces the actuator or the memory of the electronic control unit memory is lost, and requires air conditioning initialization learning.
6. ABS Bleeding
Help exhaust the air after repair the ABS pump system.
7. AdBlue Reset
Reset urea after the diesel exhaust treatment fluid is replaced or filled up.
8. Throttle Matching
Initialize the throttle actuators to the default state.
9. TPMS Reset
Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
10. Tire Reset
Set the size parameters of the modified or replaced tire.
11. AFS Headlamp Reset
Initialize the adaptive headlamp system.
12. Sunroof Initialization
Initialize the sunroof when locked off or closed.
13. Battery Reset
Register the battery after replacement.
14. Seat Calibration
Calibrate the memory in replaced or repaired seats.
15. Oil Reset
Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.
16. A/F Reset:
Set or learn Air/Fuel ratio parameters.
17. GEARBOX LEARN
Help complete the gearbox self-learning to improve gear shifting quality.
18. Transport Mode
Deactivate the transport mode.
19. Windows Calibration
Perform door window matching to recover ECU initial memory.
20. Language Change
Change vehicle system language.
21. Suspension Reset
Adjust the vehicle body height sensor for level calibration.
22. NOx Sensor Reset
Reset catalytic converter learned value stored in ECU.
23. Stop/Start Reset:
Set up the automatic start-stop function in ECU.
24. Coolant Bleeding
Activate the electronic water pump.
25. Brake Reset
It is important in the maintenance of electronic braking system's safety and efficiency.
26.Gear Learning
The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.
27. RESET EGR
EGR Adaption is used to learn the EGR (Exhaust Gas Recirculation) valve after it is cleaned or replaced.
28. RESET HVOLBAT
High Voltage Battery Detection is used for high voltage battery diagnosis and status information
detection.
29. RESET ENGPBM
Engine Power Balance Monitoring is used to monitor crankshaft acceleration in the power stroke of each cylinder, to determine the relative power provided by each cylinder.
30. RESET GPF
Gas Particulate Filter Regeneration is used to perform the GPF replacement or regeneration after the fuel consumption is increased and engine output power is reduced resulting from a long time service of the GPF.
31. Intelligent Cruise Control System Reset
This function is used to matching the intelligent cruise control module after it is replaced or repaired.
ALL 10 Mode OBDII/EOBD Functions:
>>>Professional Fast Identifies VIN Number:
Live Data Stream Graphing provides very detailed data stream data, it could include the change of Accelerator Pedal Position Sensor1 , Actual Output Shaft Speed , Clutch A Actuator Motor , Vehicle Battery and so on. Graphical data allows you to analyze the data changes of each module more clearly and easily, and it is easier to see the problems in it.
Live Data Stream Record allow you to record the live data stream and view the data of a certain point in a targeted manner. So that you can view the data more clearly.
Live Data Stream Playback. After you have recorded the data for a period of time, if you want to view and analyze the data just recorded, you need to use data stream playback function to help you. You can view the data at any time you recorded. Then you can choose " Combine", " Report" and " Record".
Live Data Stream Sharing will let you share any data status and content you want to display anytime, anywhere. You can send it to your friend or mechanic to help you solve complex problems.
One-Click Generate Health Report
Technical Detailed
• Screen Size:7" Touch Screen
• Operating System:Android 5.0
• Resolution:1024*600 pixels
• Battery Capacity:6000mAh
• RAM: 3GB
• ROM: 32GB
• Size:251.4mm x 150.6mm x 40.4mm
• OBD II Input voltage range: 9~18V
• Charging via: DC 5V charging cable & power adaptor or Diagnostic cable through connection to vehicle's DLC
• Working Temperature: -10 to 50 (14 to 122 )
• Storage Temperature: -20 to 70 (-4 to 158 )
Packing List
2. OBD II Diagnostic Cable x 1
3. DC 5V Charging Cable x 1
4. US Plug Adapter x1;EU Plug Adapter x1;UK Plug Adapter x1
5. Multilingual Quick Start Guide x 1
6. User Manual x 1
7. Carrying Case x 1
We accept PayPal payment.
Pls contact us if you need to use another method to pay.
Pls finish Payment within 7 days after bidding ends,otherwise a unpaid item case will be opened to you.
All created orders will be shipped within 1 business day after payment been confirmed.
The shipment will be sent with USPS or UPS shipping from US warehouse in NJ or LA.
Delivery time varies from 2 to 6 business days. If you didn't receive the package in the estimated time, please contact us at once,we will give you the best solution.
We are authorize distributor of Launch and other brands, all items are 100% original.
All items can be returned within 30 days if you don't satisfy with it.
All items can be exchanged within 90 days if the item with functional error.
All items including 12 months free repair, just contact with the seller to proceed if with any problem.