Compatible A.O. Smith AO-WH-PRE-RCP Carbon/Sediment Whole House 1,2,4, Pack
Compatible A.O. Smith AO-WH-PRE-RCP Carbon/Sediment Whole House 1,2,4, Pack
Compatible American Plumber W5CIP 5 Micron Standard 10" Water Filter 1,2,4, Pack
Compatible with Dupont 800 10" Whole House Carbon Block Water Filter WFPFC8002
Compatible to Pentair Pentek C1 155002-43 Water Filters 5 Micron W5CIP 155002-52
Compatible Replacement Filters:
Compatible for DuPont WFPFC8002, WFPFC9001, SCWH-5, Whirlpool WHCF-WHWC, Pentek CBC-10, GE FXWTC, Culligan D-10A & D-10, Aquaboon CTO, PURELUS CTO, Cornelius COR10B1, COR10B5, Dupont DWC30001, PFC8002, WFDWC30001, WFPFC8002, WFPFC9001, 46942, EcoLab 9320-1002, Everpure CG5-10, DEV9108-15, Flotec TO1, OmniFilter TO1, TO1-DS, TO1-SS, TO1-SS24-01, Sears 34370, Watts F109009,etc.
Compatible for DuPont WFPFC8002, WFPFC9001, SCWH-5, Whirlpool WHCF-WHWC, Pentek CBC-10, GE FXWTC, Culligan D-10A & D-10, Aquaboon CTO, PURELUS CTO, Cornelius COR10B1, COR10B5, Dupont DWC30001, PFC8002, WFDWC30001, WFPFC8002, WFPFC9001, 46942, EcoLab 9320-1002, Everpure CG5-10, DEV9108-15, Flotec TO1, OmniFilter TO1, TO1-DS, TO1-SS, TO1-SS24-01, Sears 34370, Watts F109009,etc.
Carbon Block filters are NSF/ANSI Standard 42 certified for material and structural safety. These filters have a particle retention size of 5 microns, and are suitable for drinking water filtration applications. Carbon block filters are manufactured with NSF certified, safe, coconut shell activated carbon to reduce unpleasant taste, odor, chlorine and other contaminants from drinking water. The filter has a 2.5" outside diameter (OD) and an total length of 9-7/8". The operating temperature range is 40 to 180 degrees F, and has a maximum pressure rating of 250 pounds per square inch (psi). This carbon block filter is suitable for use in water dispensing applications where higher chlorine levels are present. Hydronix Coconut shell carbon blocks have great cost to performance value, have high chlorine reduction capabilities, great dirt holding performance, and offer exceptional value and performance over other similar filters in the market.
Carbon Block Cartridges are manufactured with activated carbon. Carbon Block Cartridges are ideal for point-of-use (under-sink) and Reverse Osmosis applications.
- Activated carbon filter is made of high quality coconut shell carbon. Outer layer has food grade plastic net wrapping PP non-woven fabric, which can last up to six months.
- Submicron carbon block reduces extra fine particles and dirt from drinking water
- Reduces taste/odor/chlorine and VOC's from drinking water
- Tested and Certified by NSF International to ANSI/NSF Standard 42.
- Fits most housings that accept standard 2-1/2" X 10" filter
- The filters usually need to be replaced TWO or Three times a year, depending on the water quality and the type of water.
- It's time to replace the filter when the taste of the water is odorous or the water flow is reduced.
Two Filter Types Compared
The block filter will usually be noticeably heavier and will have a more solid, dense feel to it when squeezed.
If you’re looking for a filter to do the double-duty of chlorine/chemical removal AND sediment removal, the carbon block filter will usually offer the best of both.
- Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility.
Additional add-on's available for purchase.
