This custom designed 3D printed license plate bracket fits almost all 2015-2021 Ducati Scramblers such as: Full Throttle, Icon, Icon Dark, Cafe Racer, Classic, Urban Enduro, Flat Track Pro, Street Classic, Mach 2.0, and Nightshift. It DOES NOT fit the Scrambler 1100, Desert Sled, Sixty2, or ANY 2022 models as they changed the swingarm and tire hugger design. This is the LEAST EXPENSIVE AND EASIEST fender eliminator for the Scrambler models. It mounts to the sub-frame using stock bolts and puts the tag right in front of the rear tire. The bracket also uses the factory plate light and accompanying bolts, making it very easy to return to stock if need be. Factory turn signals are not touched, so there is no need for cutting or splicing anything. Just remove the stock arm, put the factory plate light on this bracket, bolt your tag up, and bolt it to the bike. This should take no more than an hour. IMPORTANT: This listing it the bracket AND the swingarm cleanup kit. Once the factory tire hugger is removed, there will be 2 exposed metal sections on the swingarm. To cover up those eyesores, simply put some gasket maker / adhesive down onto those spots and press the 2 pieces into place, it's as simple as that. _______________________________________________________________________________________________________________________________________________________________________ If you have any questions, feel free to shoot me a message and I will respond as quickly as possible. Thank you for viewing!  ALL ITEMS ARE NOW PRINTED IN PETG, very strong and UV resistant! **I do my very best to get orders out next day, but sometimes other orders and/or printer maintenance causes delays.**