Thanks to M4j0r, zecoxao, db260179, and every other developer who made this modification possible!
Also huge thanks to Squeept and RIP-Felix for helping me learn BGA rework. 

What is this service for?
  • Original 90nm GPU in all backwards compatible PS3 models* replaced with a more reliable 40nm or 65nm GPU.
  • GPU VDDR voltage adjusted for new GPU. Syscon will remain in control of power delivery to ensure system's safety.
  • Motherboard will be ultrasonically cleaned to remove all flux residue and prevent corrosion overtime.
  • All thermal paste and thermal pads replaced. All internal dust will be cleaned.
  • CPU brace will be installed to reduce thermal paste pump out over time.
  • One year warranty is provided with the new GPU if system passes testing. If system fails during this period due to a GPU related defect, the GPU can be replaced again at no additional cost (warranty does not cover return shipping after 30 days).

*This service applies to all fully backwards compatible PS3's (CECH-A, B, C, E models and DECHA00A). Which GPU revision your system will receive depends on current stock. If you have a preference, you may let me know before the service is performed, but please keep in mind that this may increase the turn around time and or cost of this service.

Why should I get this service?

Most backwards compatible PS3's fail due to defective GPU's which can only be fixed by replacing the GPU. This service will rid your system of the original 90nm GPU, and replace it with a newer, more reliable, and more efficient GPU found in PS3 Slim models. The newer GPU revisions do not suffer from the same defective design as the original GPU, which will greatly improve the reliability of your backwards compatible PS3.

Additional Services:

Additional services can be added to your order via the Price Adjustment listing. The quantity must be adjusted to dollar amount required. A list of additional services and the listing's link can be found below:

- CMOS battery replacement: $10
- NEC Tokin capacitors replacement: $100
- Fan mod*: Free

*The fan mod involves editing the PS3's fan curve in syscon to prioritize lower temperatures. This will slightly increase the fan speed in exchange for lower peak operating temperatures. This mod is completely safe and will not pose any risk to using your PS3 online. The mod is also not affected by firmware updates or HDD reformatting. If you would like this mod completed with this service, please let me know before the GPU is replaced.

Price adjustment listing:

If you have any additional requests not mentioned here, please feel free to send me a message regarding them!

Policies

If you are sending in a defective system, then your system will be diagnosed before service to ensure that the issue is actually related to the GPU first. If it is found that the GPU is not defective and you decide to not have the original GPU replaced, then the difference between the new repair cost and what was initially paid for this service will be refunded to you.

If the GPU replacement / repair service is attempted, but the system is found to be unrepairable afterwards, then a $100 repair attempt fee will be applied and the difference from what was paid for service will be refunded.

If a diagnosis is made and the system is found to be unrepairable before any repair attempt is made, then a $50 diagnostic fee will be applied and the difference paid for service will be refunded. The diagnostic fee will also apply if you decline any repair be performed after a diagnosis is made.

How do I send in my console?

After purchase, you will soon receive a direct message from me including all of the necessary shipping information. Shipping costs in this listing only cover return shipping. Unless otherwise stated, turn around time is usually 10 business days after receiving your system.

To ensure that your system is safely shipped, I recommend following the advice listed below:

1. Use a box that is at least 2 inches larger than the console on all sides (front, back, sides, top and bottom).

2. Ensure that the console itself is wrapped with at least 1 inch worth of bubble wrap on all sides. Ensure no corners are exposed.

3. Any remaining empty space in the box should be filled with compressible shipping material, such as foam, crumbled paper, etc. Please do not use air packs as they can pop and become useless.

4. When the box is closed, ensure that the console does not move when the box is shaken.

Please keep in mind that I am not responsible for any damage caused during shipping due to inadequate packaging, and any systems received damaged due to inadequate packaging may be refused service, returned as is, and your order will be refunded minus shipping costs. 

Please feel free to send me a message if you have any questions or concerns!