High Temperature Circulator oil bath 5L room temp ~300°C 8L/min for reactor
Specifications:
1.Water and oil temperature was up to 300 degrees.
2.Flow of outer circulation is 7~15L/min.
Introduction
This high temperature circulator is a new design of a high temperature heat source,
suitable for jacketed reactor, chemical reaction, high temperature distillation, semiconductor
industry.
Feature
1 High temperature circulator is suitable for fermenter,jacketed glass reactor and other
things.
2 Outside circulation could rise the temperature in the jacket,therefore materials in
which would react.
3 Temperatur fluctuation is in ±0.2°C.
4 Resolution of digital display is 0.1°C.
5 Flow of outer circulation is 7~15L/min.
6 Auto-alarm of over temperature.
7 Stop heating when the temperature is over.
8 There are six models that can be chose:5L,10L,15L,20L,30L,50L.
9 Our high temperature adopts the newest control technique,easy to operate,great
stability and high precise.
10 The PID can be set by yourself.
11 LED double window respectively digital temperature measurement and temperature setting value.
12 Microcomputer intelligent could modify the error of measuring value.
Operation steps
1 Pour liquid into the sink,the distance between liquid level and the working platen should not
less
than 20mm.
2 Chose oil for the liquid.The initial temperature of the oil must higher than working
temperature, range of which is more than 15°C.
3 Connect the out circulator pump with external equipment,which includes jacketed
reactor, chemical reaction, high temperature distillation or other equipment.First
connect outlet pipe with the inlet pipe of external equipment,then connect inlet pipe of
the circulator pump with the outlet pipe of the external equipment.
4 Turn on the power,then switch the“POWER”button and the”CIRCULATOR”button on.
Note:
1 There must be liquid in the tank before switch the “POWER”button.
2 The power supply should be AC 220V/50Hz,and it should be connected with ground.
3 This high temperature circulator should be placed at dry and ventilated places,preventing
heat and damps.There should be no objects around its back and sides in 300mm.
4 If you do not use it temporary,please turn off all buttons and the power.
Parts and components
1 One circulator
2 One power line
3 One cover board
4 One piece of specification
5 One piece of certification
6 One piece of warranty car
Technical details
Model
|
Volume(L)
|
Tempreture(°C)
|
Temperature fluctuations
(°C)
|
Flow
(L/min)
|
Tank size(mm)
|
Tank Depth(mm)
|
GX-2005
|
5
|
Normal~300
|
±0.2
|
8
|
240*150*150
|
150
|
GX-2010
|
10
|
10
|
280*190*200
|
200
|
GX-2015
|
15
|
15
|
280*250*200
|
200
|
GX-2020
|
20
|
15
|
280*250*280
|
280
|
GX-2030
|
30
|
15
|
400*330*230
|
230
|
GX-2050
|
50
|
15
|
500*330*300
|
300
|