Activated carbon air filter for Voron 2.4 printer
An FDM 3D printer works by melting a plastic filament - which can be of different types - at a certain temperature.
In some cases, this fusion can lead to the release of certain substances (sometimes referred to in general as "fumes") which, in addition to causing an unpleasant odor, can also be toxic if inhaled*.
Actions can then be taken to reduce exposure to these fumes.
For example, the Voron 2.4 plans to install panels that create a closed chamber. By printing a particular support (provided by the official Voron Design guide) we can install an activated carbon filter. In this way the fumes that accumulate in the printing chamber are filtered before being released into the working environment.
The ideal is to combine a HEPA filter with the activated carbon filter.
Thanks to the installation of a HEPA filter and an activated carbon filter, a high efficiency against nanoparticles and VOCs (Volatile Organic Compounds) and UFPs (Ultra Fine Particles) is achieved. They also help reduce odors emitted during printing.
The filter has an average duration of between 3 and 6 months. It varies greatly based on how often the printer is used, the material being printed, the environment in which it is installed, and many other factors.
The filter for the Voron 2.4 printer is in an easily accessible position, so it is easy to check its condition and replace it if necessary.
Attention! It is important to work safely.
We remind you that it is always recommended to keep a 3D printer in an airy, non-closed and easily accessible place.
Even if PLA is used, it is preferable to provide good ventilation for the extraction of any unknown vapors emitted by the dyes present in the colored PLA, or by poor quality raw materials.
Also, before performing any maintenance or modifications, always wait at least 30 minutes to allow the printer to cool. Periodic inspection and replacement of the filter is also considered maintenance.
The package contains: 1 x Activated carbon air filter for Voron 2.4 printer
Note: the filter in the dimensions supplied by us is compatible with the EXHAUST block described in the official manual of the Voron 2.4 r2
*check the blog section to find more details:
https://www.dhm-online.com/it/blog/tech-lab-c14
For more information contact us.
The object you will receive may differ in some characteristics from the one shown in the photo, depending on the production lot. Despite this, the functionality is maintained.
MULTIPLE ORDERS
For the purchase of multiple items is possible ask the seller for the total. In the event that we do not receive any requests, and the sum of the shipments calculated automatically by eBay is therefore paid, there will be no refund.
BILLING
We issue an invoice with a separate VAT indication, to be requested SINCE the purchase, reporting all the necessary data (with eBay message or PayPal note).
If you don't request it, the transaction will be recorded at the end of the day in our pay register. It will therefore no longer be possible to request the commercial invoice relating to the order.
This is why we take care of your order right from the packaging, delivering it to the shipper within 24 working hours following payment (in most cases).
Are available:
- Mail 1 economic service: delivery takes place on average in 2/6 working days (excluding remote areas). Being an economic service (without full tracking) there may be delays that cannot be managed by us.
IF YOU RECEIVE AN ITEM NOT CONFORMING TO THE DESCRIPTION, NOT CORRECT OR DEFECTIVE, CONTACT US IMMEDIATELY TO SOLVE THE PROBLEM TOGETHER.
Purchases made from our online store provide the consumer with a period of 14 days to withdraw from the distance contract (according to the provisions of Legislative Decree 21/2014 which transposed Directive 83/2011/EU on consumer rights). The fourteen days are understood to start from the moment in which the consumer or a third party, other than the carrier and designated by the consumer, acquires physical possession of the goods. There are some cases in which the right of withdrawal cannot be exercised, for example the supply of made-to-measure or personalized goods and the supply of sealed electronic material.
Before the withdrawal period has expired, the consumer must inform us of his decision to exercise this right.
The right of withdrawal is lost completely: if even partial use of the product is ascertained, if the lack of integral elements of the product (accessories, manuals, etc.) is ascertained, in case of partial or total damage to the product or parts of it , in case of absence or damage to the original packaging. In the presence of one of the above conditions, no refund or exchange of goods will be made.
Today we support many companies, FabLabs and digital laboratories scattered throughout Italy, and beyond.
We also address schools that are considering expanding their training offer by renovating electronics laboratories or creating new 4.0 spaces. We can provide you with everything you need in terms of components, guide projects and implementation support.
We offer the ELECTRONIC INVOICING service for Public Administrations.
We are also present on the acquistiinretepa.it (MePA) portal.
Activated carbon air filter for Voron 2.4 printer
An FDM 3D printer works by melting a plastic filament - which can be of different types - at a certain temperature.
In some cases, this fusion can lead to the release of certain substances (sometimes referred to in general as "fumes") which, in addition to causing an unpleasant odor, can also be toxic if inhaled*.
Actions can then be taken to reduce exposure to these fumes.
For example, the Voron 2.4 plans to install panels that create a closed chamber. By printing a particular support (provided by the official Voron Design guide) we can install an activated carbon filter. In this way the fumes that accumulate in the printing chamber are filtered before being released into the working environment.
The ideal is to combine a HEPA filter with the activated carbon filter.
Thanks to the installation of a HEPA filter and an activated carbon filter, a high efficiency against nanoparticles and VOCs (Volatile Organic Compounds) and UFPs (Ultra Fine Particles) is achieved. They also help reduce odors emitted during printing.
The filter has an average duration of between 3 and 6 months. It varies greatly based on how often the printer is used, the material being printed, the environment in which it is installed, and many other factors.
The filter for the Voron 2.4 printer is in an easily accessible position, so it is easy to check its condition and replace it if necessary.
Attention! It is important to work safely.
We remind you that it is always recommended to keep a 3D printer in an airy, non-closed and easily accessible place.
Even if PLA is used, it is preferable to provide good ventilation for the extraction of any unknown vapors emitted by the dyes present in the colored PLA, or by poor quality raw materials.
Also, before performing any maintenance or modifications, always wait at least 30 minutes to allow the printer to cool. Periodic inspection and replacement of the filter is also considered maintenance.
The package contains: 1 x Activated carbon air filter for Voron 2.4 printer
Note: the filter in the dimensions supplied by us is compatible with the EXHAUST block described in the official manual of the Voron 2.4 r2
*check the blog section to find more details:
https://www.dhm-online.com/it/blog/tech-lab-c14
For more information contact us.
The object you will receive may differ in some characteristics from the one shown in the photo, depending on the production lot. Despite this, the functionality is maintained.
MULTIPLE ORDERS
For the purchase of multiple items is possible ask the seller for the total. In the event that we do not receive any requests, and the sum of the shipments calculated automatically by eBay is therefore paid, there will be no refund.
BILLING
We issue an invoice with a separate VAT indication, to be requested SINCE the purchase, reporting all the necessary data (with eBay message or PayPal note).
If you don't request it, the transaction will be recorded at the end of the day in our pay register. It will therefore no longer be possible to request the commercial invoice relating to the order.
This is why we take care of your order right from the packaging, delivering it to the shipper within 24 working hours following payment (in most cases).
Are available:
- Mail 1 economic service: delivery takes place on average in 2/6 working days (excluding remote areas). Being an economic service (without full tracking) there may be delays that cannot be managed by us.
IF YOU RECEIVE AN ITEM NOT CONFORMING TO THE DESCRIPTION, NOT CORRECT OR DEFECTIVE, CONTACT US IMMEDIATELY TO SOLVE THE PROBLEM TOGETHER.
Purchases made from our online store provide the consumer with a period of 14 days to withdraw from the distance contract (according to the provisions of Legislative Decree 21/2014 which transposed Directive 83/2011/EU on consumer rights). The fourteen days are understood to start from the moment in which the consumer or a third party, other than the carrier and designated by the consumer, acquires physical possession of the goods. There are some cases in which the right of withdrawal cannot be exercised, for example the supply of made-to-measure or personalized goods and the supply of sealed electronic material.
Before the withdrawal period has expired, the consumer must inform us of his decision to exercise this right.
The right of withdrawal is lost completely: if even partial use of the product is ascertained, if the lack of integral elements of the product (accessories, manuals, etc.) is ascertained, in case of partial or total damage to the product or parts of it , in case of absence or damage to the original packaging. In the presence of one of the above conditions, no refund or exchange of goods will be made.
Today we support many companies, FabLabs and digital laboratories scattered throughout Italy, and beyond.
We also address schools that are considering expanding their training offer by renovating electronics laboratories or creating new 4.0 spaces. We can provide you with everything you need in terms of components, guide projects and implementation support.
We offer the ELECTRONIC INVOICING service for Public Administrations.
We are also present on the acquistiinretepa.it (MePA) portal.
Listing created with Store360