ModuleMe Electronic

5V High Voltage Arc Ignition Module Rechargeable Arc Igniter DIY Electronic Kits

Product features:
1. This kit is made for boost coils, with professional circuit diagrams for electronic enthusiasts to study.
2. When this circuit operates, it generates a stable high-frequency arc with extremely high temperature, which can easily ignite combustible materials, hence some people call it a plasma lighter.
3. The PCB board is directly printed with the parameters of the components, which can be directly welded without referring to the circuit diagram, which is quite convenient.
4. The charging interface is TYPE-C interface, which is compatible with most mobile phone charging interfaces nowadays. It can be charged by connecting to a mobile phone charger, and the indicator light will light up during charging, but it will turn off when fully charged.
5. The product has a wide range of uses and can be used in high school science popularization experiments, electronic instruments, electronic lighters, scientific small production, etc.
 
The difference between the long and short ignition wire models:
The internal circuit diagrams of the long ignition wire model and the short ignition wire model are the same, but the wiring of the circuit board is different. Therefore, their electrical parameters are the same.
 
Product parameters Working voltage: DC 3-5 V
Working current: 1A-2.5A
Rated function: 5-8W
Charging interface: TYPE-C
Continuous working time: cannot exceed 10 seconds
Output pulse voltage: 0.5KV-0.8KV
Working frequency: 20KHZ-25KHZ
Sparking arc distance: 3mm-6mm
Fill up about 200 to 300 cigarettes at a time, which is related to the speed of cigarette lighting.
Transformer overall size: 14MM * 14mm * 7.8MM
Battery dimensions: 7 * 20 * 25mm
Long ignition wire circuit board size: 3.7CM * 5.5CM
Short ignition wire circuit board size: 3.58CM * 4.87CM (excluding ignition head)
Long ignition wire shell size: 6.5CM * 4.9CM * 1.7CM
Short ignition wire shell size: 6.24CM * 4.68CM * 1.84CM
 
Product Description:
The transformer has been sealed with epoxy resin, and there are two primary windings in the transformer. One group of thick copper wires is the main winding, and the other group of fine copper wires is the feedback winding.
The secondary output is high voltage. The two copper wires in the transformer, one thick and one thin, are wound together as the positive pole, respectively at the tail of the main winding and the feedback winding head, connected to the positive pole of the power supply.
The PCB board adopts FR-4 military grade A material board, and the tolerance and stability of some parameters of the board make A material very strong, which benefits from its high price compared to other board materials.
The PCB board is directly printed with the parameters of the components, which can be directly welded without referring to the circuit diagram, which is quite convenient.
Attention:
If buying a package without a battery, the buyer needs to bring a high rate battery, which can output a current of up to 1A.
The battery capacity of our package is 220MAH, and the discharge rate is around 20C. Battery dimensions: 7 * 20 * 25mm
Pictures of the package battery (different batches of batteries have different typing, and the pictures are for reference only); PCB batches may differ in color, please understand
 
Product List:
Long ignition line DIY bulk shipment list:
PCB board * 1
Booster high-voltage package * 1
6 * 6 * 12 buttons * 2
1W 33 Ohms -43 Ohms Resistance * 1
1N4007 diode * 1
10K resistor 0.25W * 2
51O Ohm resistor 0.25W * 1
MJD3055 transistor patch * 1
3MM LED blue * 1
104 single stone capacitor * 1
TP4054 * 2
TYPE-C charging port * 1
 
Long ignition wire shell shipping list:
1 set of housing
10 M3 * 8 screws
4 M3 * 10 double pass copper columns
 
Short ignition line DIY bulk shipment list:
PCB board (welded small patch) * 1
1W 33 Ohm resistor * 1
UF4007 diode * 1
MJD3055 transistor * 1
YTPE_ Block C * 1
6 * 6 * 14 buttons * 1
High voltage package * 1
 
Short ignition wire shell shipping list:
1 set of acrylic shell
2 M3 * 10 nylon columns
5 M3 * 8 screws
5 M3 * 6 screws
  1. We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
  2. Payment must be received in 5 business days of auction closing.
  3. Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
  4. Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
  1. We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
  1. All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
  2. If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
  3. If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

DataCaciques