Product Introduction

X-431 IMMO ELITE is a new generation of 8-inch automobile special anti-theft matching tool with high configuration and super performance. The host is developed based on the Android 10.0 open system, adopts a 2.0Ghz 4-core high-efficiency processor, 4GB RAM+64GB ROM large storage, and is equipped with a high-endurance battery, which make the diagnosis faster, more stable and more durable. X-431 IMMO ELITE integrates powerful anti-theft matching, anti-theft programming, full-model system-wide diagnosis of basic functions and special functions. It is the best choice for intelligent maintenance of the anti-theft matching tool in repair shops.

Professional Locksmith Anti-theft Tool

Anti-theft Matching / Clone / IMMO Programming / Key Coding / Remote Generating / Transponder Reflash

Support 60+ brands of independent anti-theft matching software for American, European, and Asian models. Support further in-depth development and coverage of anti-theft software for various models. Support more password reading, key adding, all keys losing and anti-theft related module replacement functions. Menus are optimized, the operation process is more convenient, and more brands continue to be launched.

Product Functions – Anti-theft Programming

Support car key chip reading/writing, EEPROM chip reading/writing, MCU chip reading/writing, EEPROM and FLASH reading/writing of engine ECU and gearbox ECU

Anti-theft advantages
--Support replacement or cloning of VW/Audi MQB platform engine ECU (no need for the original car engine ECU data, it can be read directly from the key)
-- Support replacement or cloning of VW/Audi  MQB platform gearbox ECU
-- Support replacement of Audi (0AW/0B5) fifth-generation gearbox ECU
-- Support reading/writing and cloning of VW fourth-generation UDS engine ECU
-- Support the cloning in BENCH mode without disassembly for more than 170 types of Bosch engine ECUs, more than 10 types of Siemens engine ECUs, and 18 types of gearbox ECUs (covering various European, American and Asian models, and continuing to increase)
-- Support the erasing function for Mercedes-Benz engine, gearbox, EIS, and BMW gearbox.
--- Support the matching function and password calculation function for all models of Chery sedan and JAC passenger cars up to 2021 

Anti-theft module replacement
Support the anti-theft module replacement function for models such as BMW, Mercedes-Benz, Volkswagen Audi, Porsche, Honda, Nissan, Hyundai, Kia, BYD, Changan Automobile, Wuling Baojun, GAC Trumpchi, SAIC Maxus, Great Wall Motor, Chery, Dongfeng Fengxing, and JAC passenger cars.

Anti-theft password reading
Support the anti-theft password reading function for models such as BMW, Mercedes-Benz, Volkswagen Audi, Peugeot Citroen, GM, Nissan, Hyundai, Kia, Chery, Dongfeng Fengxing, and JAC passenger cars.

Key matching
Support the key matching function for models such as Ford, GM, Mercedes-Benz, BMW, Volkswagen Audi, Porsche, Peugeot Citroen, Land Rover Jaguar, Honda, Toyota, Nissan, Hyundai, Kia, Great Wall Motor, Chery, Changan Automobile, JAC Passenger Cars, Wuling Baojun, and BYD.

Launch X-Prog 3 Advanced Immobilizer & Key IMMO Anti-Theft Programmer
X-PROG 3 GIII is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.
 

Launch X-Prog 3 Features:

1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine ISN code.
2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.
3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
4. Reads & writes most Engine/Gearbox ECUs without disassembling the shell

Launch X-Prog 3 Advantages:

1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).

Core Functions:

1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports ECU replacement for the fourth-generation of VW/AUDI engine;
5. Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.
6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
8. Supports the BMW CAS4/CAS4+ module replacement.
9. Supports the ECU cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.

Launch X-Prog 3 Supported ECU MCU Chip Brands:
It supports common mainstream ECU MCU manufacturers, with more than 1,000 product models, and they are continuously being updated.

Supported EEPROM Brands:
It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and they are continuously being updated.

XPROG3 Operation Connection:

Connection method 1: Directly connect to OBD16 for key matching, data reading and writing, etc

Connection method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host

Connection method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the immobilizer programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host.

Vehicle key slot
 Used to place the vehicle key to perform key matching function

DB26    
Used to connect anti-theft cables, such as the data acquisition cable of 4th generation instrument keys all lost, etc.

Infrared slot for Benz key    
Used to place the Mercedes-Benz infrared key to perform the key matching function

Vehicle key chip hole    
Used to place the key chip to perform the key matching function
Status indicator    Power supply indicator lamp

DIY slot    
Used to connect the anti-theft ECU pin through the cable to read and write data

Locker    
Install the chip burn-in socket to complete the EEPROM or MCU data reading and writing operations

DC12V power supply    
Connect DC12 power supply
DB15    Connect the main harness