✅Note:Launch VSP-600 is free gift for you! 

LAUNCH X431 V+ PRO 4.0 2023 Elite Scan Tool, Topology Mapping, 10.1 Inch Bigger Car Scanner, Work for HD Trucks, Global Version, E.CU Online Coding & 35+ Services, 2-Year Free Update, AutoAuth FCA SGW

2023 Global Version LAUNCH X431 V+ PRO 4.0 OVER 2000000 CAR REPAIR SHOPS & MECHANICS 's First Choice.

1. As the latest Elite version after X431 PROS V 4.0 upgrade, it adds a more convenient camera scanning function, providing you with the most advanced diagnostic and coding/brush hiding technology for 12V cars and 24V trucks. It also features advanced OE-Level IMMO functions, ADAS calibration, TPMS functions, battery testing, etc.
2. 【New Released Topology Mapping】Update your X431 V+ to V 7.00.012  to gain Topology Mapping function. This advanced feature, typically found only on tools costing over $3000, provides a comprehensive view of a vehicle's data bus configurations, improving repair efficiency by up to 90%. With just one click, you can gain insights into the layout of a vehicle's system and clear any troubles. Note that Topology is not a universal function and compatibility with your vehicle's brand should be verified by checking the VIN before purchasing.
3. 2023 ADVANCED OE-LEVEL FUNCTIONS: Guided Functions +E.CU Replacement+Online Coding +Setting & Changeover +Modification +Offline Coding + Customization + Personalization + Windows Calibration + Seats Calibration + Tyre reset + Language Change + A/F Reset + Coolant B leed + Transport Mode + Adblue Reset + NOx Sensor Reset NOx + Stop/Start Reset, Newly Updates: Added functions on Passenger Car Software of LAUNCH X431 V+ diagnostic scanner: GPF Regeneration, High Voltage Battery Health Test
4. Active Test (Bi-directional Control): Actuate solenoids and actuators for active testing, send commands to systems/components to test their working status, without using the vehicle controls.
5. E.CU Coding (Online Coding): Match, learn, or code the newly replaced E.CU; Customize your car, unfold the hidden features, or disable the annoying functions; Reprograms the adaptive data for certain components after repairs or replacements
6. Variant Coding (Offline Programming): programming E.CUs to meet vehicle variants, such as left-hand drive or right-hand drive. Variant coding includes the enabling and disabling of software-driven functions.
7. For 2017 and later FCA Vehicles with SE.CUre Gateway Module (SGW): Register with AutoAuth to enable your LAUNCH V+ pro tablet to communicate with the FCA SGW Authentication System and bypass the SGM, so as to perform diagnostics and bi-directionals without using a bypass cable.
8. E.CU REPLACEMENT: When an E.CU/module is damaged, you have to replace it with a new one. After replacing the E.CU/module, you have to follow the strict procedures of the manufacturer to match, learn, code, or even program it before it functions normally. Otherwise, the car cannot start or some parts cannot work normally. Featuring E.CU/Module replacement functions, launch scanner X431 V+ 4.0 can help you initialize, match,relearn, or code the newly replaced E.CU/module to get it back on track.
9. Open the Hidden Features: Make full use of hidden features or disable car’s annoying functions. 3-Time Flasher Setting, Auto L ock/Unl ock Function, one-touch signal flickers, deactivate some buzzing sounds, needle sweep,rear-view mirror folding,disable daytime running light,disable seat belt alarm beep,remove maximim speed limiter,etc.
10. A udi /VW firmware protection cancel features: One feature most techs really want is to remove firmware protection from their cars. This feature helps mechanics replace car parts. Carry out car modifications
11. Guide Function: LAUNCH X431 V+ 4.0 is FREE, but LAUNCH X431 PROS V4.0 and other scanners need to be used for a fee.
12. Compatible with X431 HDIII (24V Heavy Duty Truck) module for diagnosing light, medium and heavy duty vehicles.
13. Wireless & intelligent Diagnosis + Full Systems Diagnoses + Auto VIN Scan + One Click Update + Diagnostic Report + Diagnostic Feedback
14. More than 35 FREE RESET FUNCTIONS: fix 99% car-related maintenance issue.NEW ADDED MAINTENANCE FUNCTIONS: GPF Regeneration, High Voltage Battery Health Test.
15. More than 150 Brands and 10000+ Cars supported + 25 Languages + 2 Years F*ree Update
16. Online Maintenance Resources: Operating skills, DTC Help, Automotive Technology handbook, Repair Case and How-to Videos.

Optimized HIGH-END Hardware Configurations:

• Branded Tablet with 5.0 MP Pixel Rear Camera
• 10.1-inch HD Touch Screen: A brighter, clearer Screen let you "Deep Dive into Diagnostics"
• Andriod 9.0 System, give you smooth operation, Anti-Slip & Anti-Grease protective sleeve design
• Brilliant Battery Life: 7000mAh rechargeable battery (up to 10 Hours NON-STOP Using Time+ Long Stand-by Time)
• 64GB memory (supports extended to 128GB): save more vehicle documents & customer data.
• Multi-PID Live Data Graphing IN 1 Screen: One screen can display 12 data stream (Graphic and textual), which is easy to navigate.
• 2.4GHz&5GHz Dual-Frequency Wi-Fi, 4X faster transmission rate
• CPU Processor Updated from 1.4GHz to 2.0 GHz quard-core, greatly increased the speed of running multiple task.

OEM-Level 2023 LAUNCH X431 V+ PRO 4.0 Elite, Classic LAUNCH X431 Diagnostic Scanner, No IP Limit, 2 Years F*ree Update

 

E~CU Coding - Help the newly replaced E~CU/module to work properly

Why does the car not work properly after replacing the E~CU/module?

When the E~CU/module is damaged, replacing it with a new E~CU/module is necessary. After processing the replacement, you must follow the manufacturer's strict procedures for matching, learning, coding, and even programming it to get the car to run properly. Otherwise, the car could not start, or some parts will not work. Launch scanner X431 V+ 4.0 can help you do that.

LAUNCH X431 V+ PRO 4.0 Support Advanced E~CU Coding Functions (Online Coding, Offline Coding, Flash Hide Functions)

• Code Adaptive Data: Every automobile actuator has a record code in E~CU, which is the basis for automobile computer to mobilize their work. LAUNCH X431 V+ escaner automotriz professional has the E~CU coding function to recognize new actuators after you change the fault actuators or parts.
• Recognize Replaced Modules: E~CU coding enables multiple car systems to recognize each other and then the actuators can start to work.
• Flash Hidden Functions: This feature is used to activate hidden features that most car manufacturers include that are not available to the average car owner. Examples include corrective consumption calculation, seat belt warning, auto start/stop, hidden menus, daytime running lights, cruise control, automatic locking and unlocking of the central locking, comfort windshield washer, welcome lights, etc. To enable most of these functions, it is enough to activate them (in the car's "brain"), while for some others it is necessary to install additional missing modules in the car.

For example：

- The new Ford Focus can be upgraded to a tire pressure monitoring function by flushing the E~CU. This feature is especially important for those who like to drive long distances, significantly improving the safety of the car;

- Mercedes-Benz E-Series can change the much-criticized air conditioning mode by brushing the E~CU to improve passenger comfort;

- VW Passat can be swiped to "modify home/leave time", "selective door locking and other functions";

It is important to note that, due to hardware and other reasons, such as the Audi Q5, if you want to brush the "home/away function", you must have the automatic headlights function.

E~CU Coding Compatibility

Online Coding: BMW, VW, Audi, Skoda, SEAT, Porsche, etc.

Offline Programming (Variant Coding): BENZ, Ford, Mazda, Vauxhall, Opel, etc.

Flash Hidden Functions: Benz, BMW, VW, Audi, Skoda, SEAT, Porsche, Jeep, Dodge, Chrysler, Toyota, Honda, etc.

ALL-IN ONE, Faster, Better Than LAUNCH X431 PROS MINI/PROS V1.0

 

2023 OE-LEVEL Improved Functions, Makes LAUNCH X431 V+ PRO 4.0 Elite Tool More Advanced

1. Variant Coding (Offline Programming): Compatible with Ford, Mazda, Vauxhall, Opel, etc.

• Variant coding is programming E~CUs to meet vehicle variants, such as left-hand drive or right-hand drive. Some states/countries require the automatic activation of the headlights while driving, which results in another vehicle variant. Variant coding includes the enabling and disabling of software-driven functions.

2. Guided Functions: Compatible with Volkswagen / Audi / Skoda / Seat etc.

• Having the boot function means that you have an expert who is ideal for your repairs. It frees you from the hassle of finding automatic channel numbers and login codes. It consists of a detailed operating guide and operating instructions. For different car models, the X431 V+ scanner will provide you with specific instructions on auto-login, matching, setup and coding.

3. IMMO Keys: Compatible with Volkswagen / Audi / Skoda / Seat etc.

• Disable lost keys to prevent the car from being stolen, add new keys, and match replaced IMMO module. For more advanced IMMO programming functions, X431 V+ can use with PROG 3 key programmer.

4. Component Matching: Compatible with Volkswagen / Skoda / Seat / BMW / GM / Ford / Opel / Mazda / Fiat / Honda / Nissan / Hyundai / Kia / Subaru etc.

• This function matches and synchronizes the components with each module after you replace the module, such as Gearbox Matching / Air Suspension Matching / Seat Matching / Headlight Fitting / Door and Window Initialization Study / Sunroof Initialization / Injector Calibration / Multimedia Video Reset / Cluster Reset / Immobilizer Service / Tire Change Reset...etc.

5. ADAS Calibration:

• Compatible with LAUNCH X431 ADAS Mobile to calibrate advanced driver-assistance systems, such as ACC, AEB, and more. ADAS Calibrate a wide range of camera-based & radar-based driver assistance systems, Operate ADAS calibration to vehicle cameras, LKA system, ACC system, LDW system, and AVM system. ADAS is designed to improve driver, passenger and pedestrian safety by reducing both the severity and overall number of motor vehicle accidents. ADAS can warn drivers of potential dangers, intervene to help the driver remain in control in order to prevent an accident and, if necessary, reduce the severity of an accident if it can’t be avoided.

6. (PMI) Programmable Module Installation:

• LAUNCH X431 V+ 4.0 escaner para autos support PMI function, Compatible with Ford /Lincoin/ Mazda etc.This function is used when you need to replace a module (replace E~CU) or initialize a module.No need using the J2534 or buying a subscription.

7. Power balance Test:

• Cylinder power balance testing can help uncover hidden engine issues related to engine misfires, lack of power or just a poor running engine, which is commonly missed with other tests. So, cylinder power balance testing, is one of the best and easiest ways to find the source of a engine misfire. Furthermore, cylinder power balance testing is often used along with a cylinder compression and cylinder leakage tests to further pinpoint the problem.

8. Audi /VW firmware protection cancel features: One feature most techs really want is to remove firmware protection from their cars. This feature helps mechanics replace car parts. Carry out car modifications.

 9. Cylinder Balance test/Cylinder leakage test/Cylinder Pressure variations/Relative Compression Test.

OEM-Level 2023 LAUNCH X431 V+ PRO 4.0, Classic LAUNCH X431 Automotive Scanner Diagnostic Tool

 

35+ Mechanics Frequently USED Service Functions: Cover almost all available Reset Functions on Vehicle. ( car-specific)

LAUNCH X431 V+ 4.0 escaner automotriz professional can perform a wide range of actions as well as a number of special functions that make it an even more astonishing piece of equipment. These special functions include but are not limited to:

1. Oil Lamp Reset Service – Reset the oil life systems every time the oil and oil filter are changed;
2. Injector Coding – Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed;
3. EPB Reset – Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.;
4. SAS Steering Angel Sensor Reset – Perform steering angle sensor calibration and clear records;
5. BAT battery service – Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.;
6. ABS Bleeding – When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity;
7. Throttle Adaptation – Initialize the throttle actuators so that the “learned” values stored on E~CU are returned to the default state;
8. TPMS service – Tire pressure resetting is required to be performed after maintenance is performed;
9. Gear Learning – Perform gear learning for the car when the engine E~CU, the crankshaft position sensor, or the crankshaft flywheel is replaced;
10. IMMO (K ey Programming) - Disable any lost keys and add new keys. **Please note: This function only work for some cars with easy system.You can send the year, model to us to check compatibility. WARM NOTICE: LAUNCH X431 V+ 4.0 2023 scan tool may not work IMMO program function for some cars. Therefore, if you buy this diagnostic scan tool for IMMO/key programming function, please c ontact us before to check the compatibility.
11. AFS Headlamp Reset: Initialize the adaptive headlamp system.
12. Sunroof Initialization: The sunroof needs to be reset when the sunroof control unit have communication problem or changed.
13. Suspension Reset:Adjust the vehicle body height sensor for level calibration.
14. Gearbox Reset; 16. Tire Reset; 17. A/F Reset; 18. Adblue Reset(Diesel Engine Exhaust Gas Filter); 19. Coolant Bleeding; 20. Language Change; 21. Nox Sensor Reset; 22. Stop/Start Reset; 23. Seat Calibration; 24. Delete Transport Mode; 25. Windows Calibration; 26.AC System Relearn/Initialization; 27. High Voltage Battery Diagnostics; 28. GPF Regeneration; 29. Camshaft/Crankshaft Sensor Relearn; 30. Interactive Vehicle Dynamics (IVD) Initialization Sequence; 31. Halt/Resume Transmission Adaptive Learning; 32. Passive Anti Theft System(PATS)Functions; 33. Relearn Vehicle Data; 34. Initialisation Of Automatic Tailgate; 35. Initialise Power Window Regulators; 36. Seat Standardisation; 37. Normalise Slide/ Tilt Sunroof; etc.

!! Keep Growing with UPDATES !! (depending on the specific car models, not for all cars, ). and more and more function will be improved and optimized.

LAUNCH X431 V+ PRO 4.0 Bi-directional Scanner, 2023 Upgraded Version with OE-LEVEL Full System Diagnostics & 35+ Reset Services & E~CU Online Coding

 

Mechanics with 40 years of experience Highly Recommended: Bi-Directional Diagnostic Scan tool LAUNCH X431 V+ Elite 4.0

These two features are indispensable for accurately and precisely pinpointing problems with a vehicle: full system diagnostics and bi-directional control.

All Systems Diagnostics

As a universal scan tool, the Launch scanner X431 V+ automotive obd2 scanner can diagnose all systems on 99% of vehicles on the road and does so to OE levels. Rather than using separate OE diagnostic tools, the Launch scanner X431 V+ 4.0 helps you increase efficiency and control costs. The systems include but are not limited to:

• PCM (Drive System): Engine, Transmission, Transfer case, Electrical Machine Electronics, Gear, and more…
• Chassis System: Accumulator Management Electronics, Steering, Integrated Chassis Management, Tyre Pressure Control, Active Cruise Control, Braking System, Suspension, TPMS, and more…
• BCM (Body System): SRS Airbag, Camera, Audio Radio, Gateway, Cluster Dashboard, Rain Sensors, Charging Interface Module, Parking Assistance, Power Control Unit, Touch box, Light, Battery Charging System, Head-up Display, Wipe Control System, Roof, Seat & Door Motor system, Immobilizer, ABS ESP system, Air Condition. Electric Windows, and more…
• Electrical System: Centralized Control System Chassis Integrated Control and Safety System, Intelligent Body Electronic System, Communication and Information/Entertainment System.

Bi-Directional Control

Bi-directional makes X431 V+ scanner automotriz more than a tool that receives information from the tool but also a tool that can send commands to control the component. In this case, it is easier for mechanics to identify and troubleshoot problems without going under the cars. Some features for your reference:

• Turn on/off the front and rear side ACM solenoid, Cycling the A/C, Clutch on and off, Left clutch electromagnetic coil test, Acceleration device test, Oil pressure control test, Vehicle level position calibration, Brake Vacuum Pump, Inlet, and Outlet Valve test, Open Brakes tests, Parking brake test…

LAUNCH X431 V+ PRO 4.0 Bi-directional Scan Tool, 2023 Upgraded Version with OE-LEVEL Full System Diagnostics & 35+ Reset Services & E~CU Online Coding

 

AutoAuth for FCA SGW: Fiat Chrysler Automobiles (FCA) implemented a sE.CUre gateway module that was introduced on a selection of their 2018 and newer model vehicles. Access to diagnostic functions requires registration and authentication through AUTOAUTH for scan tools. You can directly log AUTOAUTH account on X431 V+ 4.0 bidirectional scan tool and process diagnostics for FCA vehicles seamlessly.

Diagnostic Report: After completing the diagnostic, you can generate reports from the stored diagnostic data, which will help you further analyze faults and better manage your repair orders. You can share the report with others via e-m-ail and print it out.

12-in-1 Live Data Stream: You can use Launch X431 V+ 4.0 escaner automotriz professional to view and capture real-time Live Data, get to know the current operating status for parameters, and provide insight into overall vehicle performance. There are three display modes available for data viewing: Graph, Value, and Combine. And you can display 12 data streams at the same time, providing great convenience for comparing data.

Extensive Vehicle Coverage - 10000+ Cars supported:

• Aisa: Compatible with Changcheng, Daewoo, Huachen, Zhongxing, Indian Tata, JAC, Maruti, Perodua, Chery, Isuzu, Jinlong, Suzuki, Saipa, HM, Hmazda, Ikco, Malaysia Proton, Luxgen, Toyota, Changan, Futian, Honda, Wuling, V-class, Jpisuzu, Kia, Indian Maruti, Indian Mahindra, Malaysia Perodua, Hafei, Lifan, Mahindra, Nissan, Xiali, Zhongshun, Tata, Changhe, China GM, Saicmg, Mazda, Zhongtai, Daihatsu, BYD Flyer, Hyundai, Proton, Subaru, Ssangyong, Joylong, Mitsubishi,Gonow, Qoros, Maxus, Mvm
• Europe: Compatible with Vaz, Porsche, Maserati, BMW, Seat, VW, Audi, Citroen, Landrover, Smart, Renault, Skoda, Sprinter, Land Rover, Benz, Fiat, Opel, Volvo, Peugeot, Ferrari, Saab, Gaz, DR
• USA: Compatible with Gm, USAFord, Chrysler, Willy; Australia: Compatible with Austford, Holden; Brazil: Compatible with BXFiat, BXGM

LAUNCH X431 V+ PRO 4.0 Bi-directional Scan Tool, 2023 Upgraded Version with OE-LEVEL Full System Diagnostics & 35+ Reset Services & E~CU Online Coding

 

Not Only a Diagnostic Tool, but Also an Comprehensive Inspection Tool.

LAUNCH X431 V+ 4.0 diagnostic tool supports multiple extended modules (need to be purchased separately) to meet the diverse diagnostics and inspection needs of professional technicians and personal car owners for different vehicles. Below are the details:

• LAUNCH X431 HDIII: This function enables X431 V+ to do full comprehensive HD truck diagnostic functions for cars and trucks from 12V to 24V.
• LAUNCH X431 TSGUN: Perform all professional TPMS diagnostics and maintenance functions such as activating sensors, performing TPMS relearn, programming Launch Sensors, monitoring TPMS health status, etc.
• LAUNCH BST360 Battery Tester: Connecting with this battery tester, V+ is endowed with battery diagnostic features such as battery health test, start system test and charging health test, etc., which help you to detect battery-related issues of vehicles accurately and timely.
• LAUNCH VSP600 Videoscope: Make V+ a perfect tool for viewing and capturing video and still images of hard-to-reach areas.
• LAUNCH X431 PROG3: Achieve diagnostic functions such as vehicle k ey, Engine, and gearbox programming for various vehicles.
• X431 ADAS Moblie/ADAS PRO: Calibrate a wide range of camera-based & radar-based driver assistance systems.
• LAUNCH X431 Wi-Fi Printer: V+ can be connected to WIFI printers to print out diagnostic data or reports.

Note: If you want to get this extra modules , just reach us ,we have all modules in stock.

1. What Comes with LAUNCH X431 V+ 4.0 automotive obd2 scanner?

• X-431 V+ v4.0 host, QUICK START GUIDE, USER MANUAL, PIN envelope, Storage Case, CLIPPER, FUSE, BT ADAPTER (DBScar-4/DS301), SWITCHING ADAPTER, OBD 1 Adapter BOX, AIT I OBD16 Extension Cable, X-431 PRO5 USB A to Micro cable, Cigarette Lighter Line, Power Cable with Double Clamp;
• 24 special connectors for diagnosing different cars directly: AUDI-4, BENZ-14, BENZ-38, BMW-20, CHRYSLER-6, DAEWOO-12, DAIHATSU-4, FIAT-3, FORD-6+1, GAZ, GEELY-22, HONDA-3, KIA-20, MAZDA-17, MITSUBISHI/HYUNDAI-12+16, NISSAN-14+16, SSANGYONG-14, SSANGYONG-20, SUBARU-9, SUZUKI-3, TOYOTA-17, TOYOTA-22, UNIVERSAL-3, GM/VAZ-12;
• EL-50448 TPMS Activation Tool 1Set ( in the package)

2. Choose your native language without encountering any sort of language barrier

• 24 languages supported: English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, Hungarian, Finnish, Simplified, Czech, Turkish, Greek, Arabic, Danish Persian, Romanian, Serbian, Swedish, Chinese Traditional.
• Thus, if you feel more comfortable with your native language, you can switch back and forth as necessary without encountering any sort of language barrier.