•General:

The Mug Press is a great tool for applying your digital images onto sublimation coating mugs. Set up and print a digital image onto transfer paper using your favorite image manipulation software program, and then use the Mug Press to heat and transfer the image onto the substrate. The main benefits of the Mug Press is how quickly the image is transferred, the easy-to-use digital control panel and thumbscrew pressure adjustments.

1.SET TEMPERATURE &TIME (Blue means temperature, white means time)

2.1.Press  on the on / off switch located on the side of the heat press to be energized. 

2.2.Press once on the "SET",  screen show "SP" on the display. Press “▼”or “▲” to the desired temperature.

2.2.Press once again on "SET",  screen show "St" on the display. Press “▼”or “▲” to the desired time.

2.3.Press “SET” again after finish all setting to come out setting mode.

2.4.Put objects when the machine has reached the desired temperature, close heating plates, waiting time.

Components and functions:

①        Clean the mug surface,cut the image as per your design

②        Wrap the mug with the cut image，Make the image in the central and make it symmetrical both sides；Stick the paper with thermal tape.

③        Put the mug in the center of heating mat

④        Adjust the pressure ball for printing mugs, not too tight, or too loose and close the handle.

⑤        Turn on power  ,adjust the gauge  time about 200S-300S，temp about 170℃-185℃.                                           

⑥        Press Time counting down button ,the machine will sound an alarm automatically when reaching time,turn off power , take out the mug from the heating mat

⑦        Peal off the paper. Put the mug S L O W L Y into cool water,then see a photo mug is well done by yourself!

Pls make sure there will be mug in the heating element when you turn on power

                                                                                                   

	Problem	Cause	Handling methods
1	No display after    powering up	Poor outlet contact,    or       the fuse is blown.	Change the power cable    and       check outlet.    Replace fuse with the supplied backup fuse.
2	Fails to heat up or    does not heat up to the temperature       displayed.	The heating pad is       burnt out.	Check heating pad       connections. Replace    the       heating pad.
3	Lack of color, faded    image.	Insufficient    temperature       and/or press time.	Adjust the    temperature       and/or increase the    heating time.
4	Darkened, deep    color; blurred image.	Pressed for too    long,temperature too high	Adjust the    temperature and       heating time.