Custom LED graphic display upgrade.
Suitable for every Tascam DM-3200 / DM-4800.
Black/White Blue/White graphics available.

NO soldering is required !

This display has a modern LED backlight, a huge improvement over the ccfl ( Cold Cathode Fluorescent Lamp ) backlit type used by tascam originally and still being sold as a replacement.
This LED display should be judged as an upgrade not simply a replacement.
Display will arrive ready to Plug N Play.
Bolt it in, plug it in, switch it on. Simple.
The original ribbon used to connect the old display, connects to the new display in the same way, this is important as it simplifies the whole install process.
This is possible because the correct RA LIF connector is attached to the display before it ships. The pitch of the LIF connector on the new graphic matches the pitch of the FFC ribbon on both mixers.
To connect up, you will simply, disconnect the ribbon from the old display, reconnect it to the new display. Finally, connect up the backlight, this is also on a connector leaving it plug N play as well. I'll provide you with visual instructions of a new display connected up for ref.
No skills are required to install this graphic.
The backlight connections and circuits to fine tune the contrast are also incorporated within.
The listing price includes the display and all the work to leave it Plug N Play !

This custom made display is in a different league completely to the ccfl ones Tascam are selling.
Most importantly, it has an LED backlight that runs completely cool. The display problems, associated with these mixers, is a direct result of the inferior quality of the old display construction and the limited lifespan of the ccfl backlight (15-20k hours) 
Once the old display is removed / replaced with an LED backlight, the display performance is improved. Backlight performance increases 5 fold to a typical (100k hours) for an LED. Therefore, display lifespan of 15-20+ years, should be expected, once installed in your mixer. Not the 1-2 year typical with the ccfl replacements sold by Tascam. Its simple, fit this NEW LED display and your problems are over.
For a very long time. Guaranteed.

**I custom build this display, the exact same way for both the 3200/4800. Everything is Identical. Its not necessary to specify which mixer you have**

**THIS DISPLAY CANNOT BE INSTALLED WITHOUT MY SUPERVISION. CONTACT ME FOR DETAILED STEP BY STEP INSTRUCTIONS BEFORE ATTEMPTING TO INSTALL**

**This display is an LED display, it's backlight is NOT the same as the old CCFL one inside your mixer. the LED backlight is powered differently, that means it "connects" Plug N Play differently. You will ASK for instructions how to do this,  when your ready to install. Thats the best time to discuss things**