RIXSON
(2) Pocket Pivot

MPN: F519-605

Pocket Pivot Polished Brass Finish, Doors Weighing Up To 1750 LBS

NEW in the BOX (2 Pivot Hinges and Hardware)
***Please Read***
(Box has a little shelf wear and minimal writing on the exterior but, the door pivot set is new, guaranteed, and ready to put into service.)


(2 Pcs) RIXSON - F519-605 - POCKET PIVOT - Polished Brass - (NEW with HARDWARE)


APPLICATION
* Pocket Door Pivot
* Non - Handed

INTRODUCTION
Pivot sets provide the best possible means of hanging a door. They are designed to work with the laws of physics to provide long-lasting performance and reliability. The weight of the door is supported entirely by the bottom arm, which is directly connected to the pivot spindle.

This hanging means provides several important advantages:
• Fasteners on the door and frame are in shear rather than tension (as with hinges) and are less likely to pull out overtime. This creates less stress on the frame assembly, prevents door sagging and allows the door to swing with less resistance from friction.
• A door supported in this manner relies on the strength of the floor to carry the weight, not the frame. This allows extremely heavy doors to be hung in an opening and allows door adjustment throughout the life of the building to compensate for settlement.

AESTHETICS
• Offset or center hung pivot sets are more attractive than alternative door hanging devices.
• Full floor-to-ceiling concealment is offered for center hung doors providing almost unlimited design flexibility.
• Extended spindles available to raise door above finished floor for complete concealment.
• Specification of heavy panels for door face with standard offset pivot preparation is available.
• Doors up to 1,750 pounds are accommodated, allowing all standard and heavy doors in a building to be hung by same hanging means.

PERFORMANCE
• Full weight of door is borne by floor pivot, providing long pivot life and trouble-free operation.
• Screws are in shear in pivot-set installations and are less likely to pull out from tension–eliminates sagging doors.
• Vertical adjustment provides for field modifications to suit conditions

SAFETY & SECURITY
• Models are available for labeled fire and lead-lined doors.
• Doors cannot be removed by vandals.
• Virtually concealed, pivots are not abuse or vandal prone.
• All offset pivots shall be UL10C compliant.

ECONOMY
• Pivots provide longer life and more trouble-free operation than other door hanging means.
• Door and frame life is lengthened.

SUGGESTED SPECIFICATION
All pivots and/or pivot sets shall be the product of one manufacturer. Sets as noted in hardware groups shall be matching in design for both labeled fire doors, lead-lined doors and regular doors. Pivots for 20-minute fire doors shall be non-ferrous and match the finish of adjacent hardware. All pivot sets are required to meet ANSI grade one standard as listed in ANSI 156.4. Caps shall be hex type to increase security.

PRODUCT DESCRIPTION & FEATURES
• Full mortise, non-handed pivot for pocket door applications
• Heavy-duty steel pivot with ball bearings
• Allows doors to swing 90°
• Minimum three pocket pivots per door
• Doors over 80"(2032mm) in height require four pocket pivots. Every additional 30"(762mm) of door height warrants another pocket pivot
• UL listed for all labeled pocket fire-door assemblies up to and including 3 hours

Join MD Industrial Salvage in our mission to offer high-end Industrial, Electrical, Plumbing, Automation, Manufacturing, and PLC processing parts and supplies from businesses in transition, at a much lower cost than OEM, saving you, our customer, money. Whether it's factories, machine shops, distributors, or stores that are moving, updating, or closing, we're here to help. If you have access inventory, overstock, or good returns, and not sure where to get rid of them, give us a call, we buy single items, and complete inventories.

Often, businesses no longer have a use for the items we acquire, and these valuable resources sit idly in maintenance departments or storage rooms. Most of these inventories are brand new and still in their original packaging. Occasionally, you may find used items on our listings, typically from parts shelves serving as backups, and have been fully tested, when possible.

While some original packaging may show signs of wear, such as writing, shelf wear, tears, or stains, rest assured that the product inside is in new condition unless explicitly marked as used. We offer these items at significantly discounted prices compared to wholesale and retail rates.

We stand behind the quality of our parts and supplies. We guarantee that they are new and in good working condition unless otherwise stated. If an item is labeled as used, it was set aside in our parts area as a reliable spare, ready for use.

To ensure your peace of mind, we offer a 100% return and refund policy—no questions asked. When you choose MD Industrial Salvage, you can purchase with confidence, knowing that we've got your back! Act now and discover incredible deals on premium industrial supplies. 

And don't forget to add us to you favorites if you are on the watch for industrial parts, equipment and tooling. Our inventory is ever changing and we honestly NEVER know what we have coming around the corner.