SAFE & SECURE SHOPPING
100% SATISFACTION GUARANTEED
FAST SHIPPING

You may also like

1

Product Description

1

Features:
- Portable spot welding machine, with quick release welding pen.
- Compact and portable size design can easy to take belong;
- Integrated welding pen use gold-plate terminal, with good conductivity and low contact resistance;
- Thickened pure copper strip and imported MOS tube can save energy and can provides longger service time;
- Built-in high rate power battery, with fine charge and discharge performance, more stable;

Specifications:
- Name: Spot Welding Machine
- Material: Metal Case
- Battery Capacity: 5500mAh
- Welding Output: 4.2V Max 639A
- Welding Thickness: 0.1-0.15mm
- USB Output:5V Max 2.4A
- Charging Port: Type-C
- Product Weight: 302g
- Product Size: 103x83x29mm
- Package size: 143x107x48mm
- Package weight: 407g

How to Use:
*Take note to fully charge the battery before use*
1. To Turn On/Off - Long press button for 3 seconds then release the button after hearing the boot sound,that is turn on/off.
2. Short press the button. If the buzzer rings, that is shift position. Press one time, and it can add 1 gear. 1-9 cycles, and the 9th gear is the strongest welding strength.
3. Soldering Operation - Start with level 1, unit will start soldering after 0.5 seconds once it detects item. Power setting can be adjusted to suit different soldering job. If high level going into current protection mode and reboot,you can connect a USB input;
4. Auto Power Off - After no activity for 15 minutes the unit will automatically shut down.
5. USB Output - The USB output will be activated automatically once connected. Once output current is less than 50mAh the unit will automatically cut power output. Short press button to resume power output.
6. Error Warning - If the device fails, the buzzer keeps beeping after turning on;
7. Firmware Update - The upgrade port is reserved, which can be upgraded to the latest firmware

Precautions
1. It's recommended to weld nickel sheets below 0.15mm (Can welding 0.15mm).
2. It's recommended to weld when battery power over 70% for better welding effect.
3. Pay attention to the placement of the soldering pen,if the pressure of the soldering pen too loose,will break down the nickel sheet.
If the pressure of the soldering pen too tightly,the welding will be week.

Packaging Include: (optional)
- 1 x DH20 Pro+ Welding Machine
- 1 x Welding Pen
- 1 x 0.12mm*8mm*2m Nickel Plated Steel Belt

1.We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. Please allow 1 business days for us to response. If you do not receive any reply from us, please check your email ensuring your mailbox has not reached full size.

2.Due to some ISP SPAM filter settings, you may not be able to receive our replies; if you have problems receiving our emails, you may need to use a different email account to contact us.

3.Please give us the opportunity to resolve any problem. We understand the concerns and frustrations you might have, and will try our best to resolve the issues. Please email us before leaving any negative feedback or open any dispute on PayPal.

4.We care about our valued customers, and will always try to help you. So if you have any problems, please e-mail us immediately.

1.We accept Credit Card, Debit Card and eCheck payments through PayPal.

2.Payment should be done within 7 days after the end of the Auction. Otherwise Unpaid Item       Dispute will be filed with eBay.

We Ship to Worldwide.

Item are shipped from shenzhen,China via epacket or China Post, which will take around 10 to 20 business days to deliver in some developed countries like Europe & America (Most area) and to Other countries:15-60 business days.

Delivery time depends on destination and other factors, it may takes up to 20 business days.


 

1.100% Customer satisfaction is our top priority.

2. Return/refund is accepted within 30 days after the buyer receives the item. NO exchange will be accepted after 30 days from the date when the item is received.

3. If you receive an incorrect,damaged,defective,or item not as described,please feel free to contact us for a partial/full refund or resend.

Our office hours are 9:00 a.m to 6:00 p.m (GMT +8) of Monday to Friday .
And our Office is closed on weekends and public holidays.
We apologize for the late reply during the holidays.

Copyright © 2022 Tongtool

DataCaciques