Product description:

Antminer T17+ Pro Refit Heat Sink This one-piece upgrade heat sink is used to refit the Bitmain Antminer T17+ ASIC miner hash board appears the heat sink falls off or missing. In order to help the miner repair the faulty hash board in time, the upgrade heat sink can improve the short circuit problem of the Antminer T17+ hash board. Removing the original heat sink and replacing it with a refit heat sink, can prevent the ASIC chip from being burned or the circuit board short-circuited, and the maintenance cost and time can be reduced in time. The upgrade heat sink is fixed to the hash board through tin-plated nuts, the operation steps are simple, and the stability and mining performance of Antminer T17+ pro are greatly restored.

The offer is for 3 pcs heatsinks with accessories to secure them on three hashboards. 

Please keep all chips working well before updating

1. Remove the original heat sink;

2. Take out the chip, remove the tin on the chip;

3. Clean up the hash board;

4. Clean the pad;

5. Fix the tin-plated nut (with the hole facing down) on the pad;

6. Add thermal paste, fasten the heat sink to the board (thermal paste/pad - put it on the board - set the washers - screws).

7. Finished and tested on the fans.