ModuleMe Electronic
Transistor Tester IGBT MOS Triode Voltage Capability Withstand Voltage Tester
Features:
1. The output voltage is 110~2600V DC, you can turn the voltage adjusting button clockwise to make the voltage bigger, and counterclockwise to make the voltage smaller.
2. The output current is 0.25~3.4mAh, you can turn the voltage adjusting button clockwise to make the current bigger, and turn counterclockwise to make the current smaller.
3. When testing MOS tubes, transistors and Zener diodes, it is recommended to adjust the current to the minimum size of 0.25mA. When testing LED backlight boards, it is recommended to adjust the current to a maximum size of 3.4mAh.
4.Portable size: the small size of this tool is very convenient for daily use, you can carry it in your tool bag without taking up too much storage space.
5.Built-in 600 mAh high-capacity lithium battery power supply, which can be charged in time through the Type-C port.
6.Wide range of applications: the tool can be widely used for MOS, triode, IGBT, diode, Zener diode, diode bridge maximum voltage capacity test, capacitor and varistor voltage verification, LED backlighting and light board test, etc.
1. The output voltage is 110~2600V DC, you can turn the voltage adjusting button clockwise to make the voltage bigger, and counterclockwise to make the voltage smaller.
2. The output current is 0.25~3.4mAh, you can turn the voltage adjusting button clockwise to make the current bigger, and turn counterclockwise to make the current smaller.
3. When testing MOS tubes, transistors and Zener diodes, it is recommended to adjust the current to the minimum size of 0.25mA. When testing LED backlight boards, it is recommended to adjust the current to a maximum size of 3.4mAh.
4.Portable size: the small size of this tool is very convenient for daily use, you can carry it in your tool bag without taking up too much storage space.
5.Built-in 600 mAh high-capacity lithium battery power supply, which can be charged in time through the Type-C port.
6.Wide range of applications: the tool can be widely used for MOS, triode, IGBT, diode, Zener diode, diode bridge maximum voltage capacity test, capacitor and varistor voltage verification, LED backlighting and light board test, etc.
Product Parameters:
Battery capacity: 3.7V 600mAH
Charging port: TYPE-C
Input: 5V 1A
Charging current: Max.550mA
Output voltage: 120-2700V
Output Current: 0.2-3.8mA
Applicable components: MOS tube/IGBT/transistor/diode/electrolytic capacitor/LED/MOV/one-way thyristor/rectifier bridge
Test Objective: Breakdown voltage value of electronic components
Battery capacity: 3.7V 600mAH
Charging port: TYPE-C
Input: 5V 1A
Charging current: Max.550mA
Output voltage: 120-2700V
Output Current: 0.2-3.8mA
Applicable components: MOS tube/IGBT/transistor/diode/electrolytic capacitor/LED/MOV/one-way thyristor/rectifier bridge
Test Objective: Breakdown voltage value of electronic components
Attention:
1. Don't use it to test high voltage large electrolytic capacitors such as 450V/220UF. It is OK to test low voltage capacitors such as 2200UF/35V.
2. If there is no output voltage when pressing the red high-voltage start button, it is likely that the voltage of the lithium battery is lower than 3.1V, which can't energise the tester, and it needs to be charged in time.
3. Only when testing LEDs and voltage regulator diodes, the output current can be adjusted to the maximum value, for testing other parts, the output current can be adjusted to the minimum value to avoid damaging the parts.
1. Don't use it to test high voltage large electrolytic capacitors such as 450V/220UF. It is OK to test low voltage capacitors such as 2200UF/35V.
2. If there is no output voltage when pressing the red high-voltage start button, it is likely that the voltage of the lithium battery is lower than 3.1V, which can't energise the tester, and it needs to be charged in time.
3. Only when testing LEDs and voltage regulator diodes, the output current can be adjusted to the maximum value, for testing other parts, the output current can be adjusted to the minimum value to avoid damaging the parts.
Package and list:
Standard version: host * 1 + manual * 1 + meter pen * 1
Advanced version: host *1 + manual *1 + pen *1 + LCR test clip *1
Standard version: host * 1 + manual * 1 + meter pen * 1
Advanced version: host *1 + manual *1 + pen *1 + LCR test clip *1
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.