• Fitment:
    • 2009-2013 Subaru Forester
    • 2008-2011 Subaru Impreza
     
  • Features:
    • Ideal replacement - this air conditioner condenser fan assembly is engineered to match the fit and performance of the stock condenser fan on specific vehicles
    • Complete package - assembly is designed with the same materials and components as the original part
    • Quality assured - components are tested in laboratory settings to ensure performance
    • Cost effective and reliable - trustworthy manufacturing for far less than same part at the dealership.
    ​
  • Know the A/C Condenser Cooling Fan:

    • 2Pcs Radiator Condenser Cooling Fan Assembly For 2009-2013 Subaru Forester 2.5L

    Fitment:

    • 2009-2013 Subaru Forester
    • 2008-2011 Subaru Impreza

     

    Features:

    • Ideal replacement - this air conditioner condenser fan assembly is engineered to match the fit and performance of the stock condenser fan on specific vehicles
    • Complete package - assembly is designed with the same materials and components as the original part
    • Quality assured - components are tested in laboratory settings to ensure performance
    • Cost effective and reliable - trustworthy manufacturing for far less than same part at the dealership.

    ​

    Know the A/C Condenser Cooling Fan:

    • A cooling fan helps move air through the radiator when the vehicle is stopped or moving slowly. An electric fan motor connected to a plastic fan blade located directly behind the radiator which is controlled by a coolant temperature sensor. This engine temperature information is utilized by the computer which signals the control relay to send power to the cooling fan.
    • When the air conditioner is used, the cooling fan automatically activates to remove heat from the condenser regardless of engine temperature. To inspect a cooling fan start with ignition key "OFF". By hand, spin the fan blade, it should "freewheel", if the fan motor does not spin or is hard to turn, it has failed and replacement is required. If the fan motor fails to activate electrically check the cooling fan fuse and relay and replace as needed.​

     

    Tools and Supplies Needed:

    • Socket set
    • Wrench set
    • Replacement cooling fan
    • Fluid catch basin
    • Protective eyewear and gloves
    • Hose clamp tool or channel locks

    ​

    Know how to Replace the A/C Condenser Cooling Fan:

    • Step 1: Locate the Radiator Cooling Fan. The radiator cooling fan is attached at the back of the radiator through a mounting frame. Under the engine and the radiator is a sticking cylinder that is encased in a small casing. That is the radiator cooling fan motor that you may need to change or repair other than the radiator cooling fan itself.
    • Step 2: Disconnect the Power Supply. Find the connector of the wires from your engine and from your radiator fan motor and disconnect it. 
    • Step 3: Remove the Fan Housing. Using a crescent wrench, remove the four screws located at each corner of the fan housing. Remove the fasteners at the sides of the fan housing as well.  
    • Step 4: Remove the Radiator Cooling Fan and the Fan Motor. You may need to remove a keeper that prevents the fan blades from moving up in the shaft up and down. As to the fan motor itself, remove it from the fan housing using a screwdriver.
    • Step 5: Attach the Replacement Radiator Cooling Fan and Fan Motor. Install the new fan motor into the fan housing. Slide your replacement radiator cooling fan into the shaft, insert the keeper and secure the new cooling fan and keeper into place. Return the fan housing back into its proper place and secure the screws and the fasteners. 

    Item Specifics
    Brand everpartstorecs
    Type Fan & Shroud Assembly
    Features Durability Tested
    Manufacturer Part Number 10257952
    Other Part Number 674-50317
    Manufacturer Warranty 1 Year
    Interchange Part Number 621-260
    Superseded Part Number Engine Cooling Fan
    Items Included as pictures shown
    Material Plastic
    Vintage Car Part No
    Placement on Vehicle Front,Driver Passenger Side
    Applicable Regions US
    Package Include 2X Cooling Fan
    Universal Fitment No
    Fitment Type Direct Replacement
    Voltage 12V
    Color as pictures shown
    Performance Part No
    Custom Bundle No
    Modified Item No

    Shipping

    1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

     

    2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

     

    3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

     tell us the new address within 12 hours after payment 

    (no delivery to remote areas).

     

    4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

     if there are any problems, contact us immediately please.

    Payment

    PayPal preferred.

     

    Other payments accepted by ebay also can be accepted.

    Service

    1. Products can be returned for no reason within 30 days of receipt

     (products to be returned must be in a resalable condition, if they have been used we will not accept the return).

     

    2. If the product does not match the description on the product page, we will exchange or refund the product for free 

    within 30 days.

     

    3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

    Note

    If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

     

    Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.

    Shop Category
     Store Home
     lift support
     Condenser
     Air Diesel Heater
     Blower Resistor
     Blower Motor
     Heater Core
     Suspension Kits
     Thermostat Housing
     ABS Wheel Speed Sensor
     Window Switch
     Oxygen Sensor
     3Rd Brake Light
     Mass air flow sensor
     AC Compressor
     Cooling Fan
     Towing Mirrors
     Door Handle
     Roof Rack
     Radiator
     Sensor
     Knock Sensor
     Catalytic Converter
     Other

    2Pcs Radiator Condenser Cooling Fan Assembly For 2009-2013 Subaru Forester 2.5L

    Fitment:

    • 2009-2013 Subaru Forester
    • 2008-2011 Subaru Impreza

     

    Features:

    • Ideal replacement - this air conditioner condenser fan assembly is engineered to match the fit and performance of the stock condenser fan on specific vehicles
    • Complete package - assembly is designed with the same materials and components as the original part
    • Quality assured - components are tested in laboratory settings to ensure performance
    • Cost effective and reliable - trustworthy manufacturing for far less than same part at the dealership.

    ​

    Know the A/C Condenser Cooling Fan:

    • A cooling fan helps move air through the radiator when the vehicle is stopped or moving slowly. An electric fan motor connected to a plastic fan blade located directly behind the radiator which is controlled by a coolant temperature sensor. This engine temperature information is utilized by the computer which signals the control relay to send power to the cooling fan.
    • When the air conditioner is used, the cooling fan automatically activates to remove heat from the condenser regardless of engine temperature. To inspect a cooling fan start with ignition key "OFF". By hand, spin the fan blade, it should "freewheel", if the fan motor does not spin or is hard to turn, it has failed and replacement is required. If the fan motor fails to activate electrically check the cooling fan fuse and relay and replace as needed.​

     

    Tools and Supplies Needed:

    • Socket set
    • Wrench set
    • Replacement cooling fan
    • Fluid catch basin
    • Protective eyewear and gloves
    • Hose clamp tool or channel locks

    ​

    Know how to Replace the A/C Condenser Cooling Fan:

    • Step 1: Locate the Radiator Cooling Fan. The radiator cooling fan is attached at the back of the radiator through a mounting frame. Under the engine and the radiator is a sticking cylinder that is encased in a small casing. That is the radiator cooling fan motor that you may need to change or repair other than the radiator cooling fan itself.
    • Step 2: Disconnect the Power Supply. Find the connector of the wires from your engine and from your radiator fan motor and disconnect it. 
    • Step 3: Remove the Fan Housing. Using a crescent wrench, remove the four screws located at each corner of the fan housing. Remove the fasteners at the sides of the fan housing as well.  
    • Step 4: Remove the Radiator Cooling Fan and the Fan Motor. You may need to remove a keeper that prevents the fan blades from moving up in the shaft up and down. As to the fan motor itself, remove it from the fan housing using a screwdriver.
    • Step 5: Attach the Replacement Radiator Cooling Fan and Fan Motor. Install the new fan motor into the fan housing. Slide your replacement radiator cooling fan into the shaft, insert the keeper and secure the new cooling fan and keeper into place. Return the fan housing back into its proper place and secure the screws and the fasteners. 


    1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

     

    2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

     

    3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

     tell us the new address within 12 hours after payment 

    (no delivery to remote areas).

     

    4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

     if there are any problems, contact us immediately please.

    PayPal preferred.

     

    Other payments accepted by ebay also can be accepted.

    1. Products can be returned for no reason within 30 days of receipt

     (products to be returned must be in a resalable condition, if they have been used we will not accept the return).

     

    2. If the product does not match the description on the product page, we will exchange or refund the product for free 

    within 30 days.

     

    3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

    If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

     

    Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.