Parameter:
Packing List
1. Wireless HDMI Extender Transmitter unit
2. Wireless HDMI Extender Receiver unit
3. Antenna
4. Power adapter (DC 12 V)
5. IR blaster
6. IR receiver
7. User Manual
|
|
|
---|
|
|
|
---|---|---|
1080p Stable Transmission
The external dual antenna makes the transmission signal more stable, and it can easily face the obstacle-free 200-meter/660 ft long-distance transmission.
|
Support Remote Control Return.
Support IR infrared transmission, and can remotely control the living room set-top box equipment in the room
|
One-to-many receiver pairing (less than 4pcs)
1.Pair one-on-one
2.Take the paired receiver and receive the receiver to be paired
3.Wait for the red light at the receiving end to turn green
4.The transmitter and receiver turn green at the same time. First press the button on the receiver then press the button on the transmitter, wait 5-10 seconds, the green light on the receiver will flash continuously, indicating successful pairing.
|
|
|
|
---|---|---|
HOME Application
No wiring, high-definition audio and video through the wall, dual-frequency support, extended 5G mode, so that the signal transmission is more stable, allowing you to easily face the problem of wiring through the wall.
|
Meeting Room Application
Committed to solving wiring problems, pure hardware, no software, plug, and play, realize 5G transmission, high-definition video, and
audio on the same screen, and realize wireless conferences. |
Hall Application
Flexible application, to achieve wireless transmission of one-transmit and multiple-receive or multiple-transmit and multiple-receive. In the lobby, wireless transmission is realized without worrying about wiring problems in the conference hall
|
Q: Pw(Power LED) off
A: 1. Make sure the power adapter is correctly connected
1. Make sure the power supply would not be interrupted.
Q:Display shows”Searching TX” for long time
1. Make sure all devices are working on supported distance. Draw them closer and try it again.
2. Check if the Transmitter is correctly connected
Q: No video or bad video quality
A: 1. Check if the joints and wires are damaged and make sure they are correctly connected to corresponding interface.
2. Ensure there is video on output devices.
3. Check the receiver is correctly connected to display equipment.
4. Make sure all devices are working on supported distance. Draw them closer and try it again.
Q: IR remote control not working
A: 1.check if the IR blaster and IR receiver is connected correctly. Exchange them and try again.
2.check if the IR blaster and IR receiver are firmly inserted to the right port.