Racingline R600 Intake Kit Intake Elbow Hose Golf MK8 R / GTI CS S3 8Y Cotton
Vehicle Fitment
VW Golf 8 GTI Clubsport 2020+
VW Golf 8 R 2020+
VW Arteon R 2.0 TSI 320ps 2020+
VW Tiguan II R 2.0 TSI 320ps 2021+

Audi S3 8Y 2020+

Cupra Leon IV 300 TSI FW 2020+
Cupra Formentor 310PS 2020+

(2.0 TSI MQB Evo EA888.4 Engines Only with Continental Turbo 300-320ps engines )

Racingline Performance R600 Cold Air Intake Kit

Looking for the most sophisticated cold-air intake available for your MQB-platform EA888 Gen3 car. The R600 intake is the world's best selling system for this platform, and it's little wonder as it combines OEM-standard design and quality with significant power gains on uprated cars. Some people forget that it's what's inside that matters when it comes to intake systems.

The R600 houses a double-sized Trifoam® dome filter inside the giant airbox, breathing in through twin air inlets to achieve lower intake temperatures and worthwhile power gains, significantly improving mass airflow through the turbo. It really is an essential upgrade for higher-powered Golf 8 GTI, R and S3 models.

The giant airbox and near-double sized surface area of the filter means that air flow rates corresponding to up to 600bhp can be supported - hence the name R600.  With big-turbo conversions getting close to this power output already, you can be reassured that the R600 has all the headroom you may ever need for future upgrades to your car.

NEW TURBO INLET SYSTEM
The factory inlet forces the airflow to pass through the restrictive plastic ‘bellows’ pipe, before tapering right down to run through a tight and restrictive plastic turbo inlet – in other words, terrible for flow. The RacingLine Turbo Inlet System replaces this pipework with a larger diameter smooth-flowing silicon hose mated to a larger diameter thin-wall free flowing intake elbow. The internal diameter of the Turbo 90 Inlet is massively increased from 74mm on the factory part right up to 84mm. It’s by combining the two parts of the kit that’s allowed us to enlarge the diameter of both the Inlet and the Hose so much – and so give the maximum possible gains. Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting this Turbo Inlet System. An essential upgrade!

TRIFOAM™ FILTER
Oversized domed High-Flow TriFoam™ air filter provides increased surface area and dust capacity, with triple-layer laminate of open-cell polyurethane foam giving an exceptionally high level of filtration.
power gains. With filter surface area more than doubled, the fully enclosed filter housing and unit is rated up to 600bhp giving significant margin for future upgrades. Worthwhile power gains over 4,000 RPM.

OEM STANDARD
High capacity airbox finished to OEM standards and materials, with careful attention to detail in every aspect of design. Hand built in the UK using the highest quality materials and construction.  SAI connection for US cars is part of this OEM approach.

TWIN INTAKES
Twin intakes, both sides of front panel across the front of the car take cold, dense air from the highest pressure area, right in the airflow.

SIMPLE FITTING
The R600 has been developed exclusively for Golf 8/MQB - meaning that fitting is straigh tforward, using original mounting points for perfect fit and function.

CFD DESIGNED
Advanced CFD software development allows the R600 to achieve optimum flow patterns from the front-panel intake, through the airbox and out through the filter with minimum pressure drop.


Distributed by Haz Motorsport