4PCS Universal Cloning Remote Control Opener Key Fob for Gate Garage Door 433mhz

Please pay attention before buying
1.The original remote control may be used normally
2. Frequency of original remote control is 433Mhz

 

Feature:

Premium Quality Material:The 433mhz remote control key fob is made of plastic material, which has the characteristics of anti-rust, wear-resistant, anti-rust, non-fading, not easy to break, and durable in use.
Fonctions:The easytouse 4channel remote control system with antitheft/one-button antitheft function can help you control gadgets, cars, houses and garages.  Clone up to 4 remote signals from 4 different remotes!
Advantages:This is a fixed frequency remote cloner (433mhz) for copying 99.99% common fixed and learning code remote controls. The wireless remote control key fob can easily pair with remote originals.
Application:This universal cloning remote control key fob is suitable for cars, garage doors, doors, sunroofs, car/motorcycle alarms, home security products, short-distance wireless remote control products, electrical appliances/home automation lights, industrial control products, etc.

 

Note:

1. Compatible with 433mhz frequency only ,Your Original remote control must be able to work and the same as our remote control frequency.
2. Before using our remote control duplicator to copy, first clear the existing code of your existing remote control.
3. The self-learning remote control duplicator cannot copy rolling codes, such as HCS301.

 

Specification:
Material: Plastic + metal
Color: Black
Operating voltage: DC 12V
Battery: built-in 12V 27A battery
Working current: 10mA@12V
Radiant power: 10mw@12V
Transmission frequency: 433MHZ
Transmission distance: 50-100M (wide space, sensitivity of receiving device is negative 100dbm)
Size : 5.5*3*1.5cm

 

How To Use

 1.  Code pairing (learning)
Place the original remote control and the copy remote control as close as possible, first press a button of the original remote control, and immediately after the indicator light turns on, press and hold a button of the self-copy remote control for about three seconds, the LED will flash 3 times and then quickly Flashing, it means that the address code of the original remote control button has been learned successfully.  The other keys are operated in the same way for learning.


2.  Clear code
Press the unlock button and the lock button at the same time for 2 seconds, the LED light starts to flash 3 times.  At this time, keep the lock button pressed, and release the unlock button.  Press the unlock button three or four times within 5 seconds, and the indicator light flashes quickly.  The code has been cleared.
Test whether the existing code of the remote control has been successfully cleared: When you finish the clearing action, you can press any button of the copy remote control.  If the LED does not flash immediately at this time, it will flash after 2 seconds, that means The original code of the copied remote control has been completely cleared.  If the LED still flashes quickly and immediately, the code still exists and needs to be cleared again.


3.  Restore the cleared code
The copy remote control has a recovery function.  If you accidentally clear the address code of the normal copy remote control during use, you can press the start and mute buttons (the next two buttons) on the remote control at the same time.  After about three seconds, the LED will flash 3 times.  It starts to flash quickly, which means that the cleared address code is successfully restored.

 

Package included:

4 x Remote Control
1 x Instruction Manual

 

 

PushAuction