Welcome to my listing - please see my other items for lots more audio enclosures. 

ALL MY ITEMS ARE QUALITY MADE TO ORDER - NOT MASS PRODUCED/STOCKED.
ESTIMATE DELIVERY DATE SHOWN UNDER BUY IT NOW BUTTON REFLECTS THIS.
'ESTIMATE' DELIVERY DATES ARE NOT SET IN STONE BE PREPARED TO WAIT LONGER IF REQUIRED. 

Lowest priced - best quality for price range on ebay or off ebay !

12" vented subwoofer enclosure (side slot vented)

This is designed for a low cost basic box option, to a general spec, for the majority of woofers to produce a good 50/50 mix of sound quality sql and sound pressure spl. 

Although a basic box -  each box is hand made by me and every care and attention is put into it to make sure it is of good quality and most importantly to the spec a 12 inch vented box needs to be. Other retailers selling pre designed vented boxes - they are undersized and out of spec, some unbelievably even selling 'sealed spec' boxes with a cheap plastic vent stuck in them. Sealed boxes average 25% smaller than vented requirements. This just restricts bass and can even damage the woofer. 

That said i do and would always advise to buy the best box possible to get the most out of your set up, my optimum ELITE range of enclosures is the best quality pre designed enclosures available at the best price and i highly recommend you invest in that box - especially if you are running the current trend of big magnet 'spl' type woofers. see item number: 152947672668

This enclosure has all the essential points needed for a good quality box: 

18mm mdf construction
Glued, brad nailed, screwed, sealed joints. 
Rounded entrance and exit on the port - to stop blowing/port noise. 
It will come with a standard terminal cup shown in pics with female internal connectors.

The listing price is for the box in carpet or left bare MDF (£5 refunded). 
specify carpet colour on notes section of checkout
BLACK 
ANTHRACITE (dark grey) 
LIGHT GREY 
BEIGE

 
Optional extras:

  • Heavy duty brass 6mm bolts terminal cup and all connections ebay item No 155761354963  £10 each
  • Best quality oxygen free copper 6mm/10awg cable pre wired - 50cm length    £5 each 
  • Flush mount sub face 18mm  £10 
  • 36mm double front wall   £6
  • Internal wadding on the walls   £10 
  • Fiberglass resin lined box internals   £15 


IMPORTANT INFO SIZING : - You are responsible for checking your sub fits and box fits your boot!

  • ENCLOSURE DIMENSIONS (INCH) 13.5 X 13.5 X 26 HDW  / (cm) 34.3 x 34.3 x 66 hdw
  • Hole   11.25 Inch / 285mm cut out hole   
  • Maximum mount depth 10.5 inch /  26cm 
  • Net internal volume    1.65 cu ft / 46.7 litres 
  • Tuning Freq 34hz