New Replacement 100+ PCS ARAH GI JOE Body Leg Screw REPAIR PART Accessory Figure. Condition is New. Shipped with USPS First Class Package.

I tested on 1982 through 2000s figures.
Original dimensions:
82~84 screws are 6.9 mm long with 3.8 mm dia heads 85~94 screws are 7.5 mm long with 3.6 mm dia heads 95~2000s are 7.35 mm body & 6.4 mm leg lengths with 3.8 mm dia heads.
My screws will fit all years because they are short enough for 82-84 lengths and small enough head dia for 85~94 figures. My screw lengths are 5.9 ~ 6.0 mm with 3.6 dia heads with same plastic forming threads as original screws.

Be careful when inserting new screw. Turn the screw backwards (unscrewing) until you feel a step. Then screw in normally. If you just start screwing, it might try to start a new tap position that can crack the plastic if it is brittle. If you see stress cracks before you start then be extra careful.


Stuck screws that are badly rusted can be removed by heating the screw with a solder iron but this method requires practice and skill. If you heat too much it will melt the surrounding plastic.

Please Note: I guarantee my screws are the dimensions listed above. I am not responsible for any damage that may occur during original screw removal and new screw insertion. So take care when replacing the original screw with these replacement screws because you are replacing at you own risk. Thank You!