Solar Charger Controller MPPT 60A 12V 24V 36V 48V Blacklight LCD Regulator Max PV Input 150V DC Support Lithium batteries

Key characteristics

1, automatic detection of 12V/24V/36V/48V DC system voltage.

2. Innovative MPPT technology, tracking efficiency up to 99%, peak conversion efficiency up to 98%. Deep cycle sealed, gel, liquid rich and lithium batteries are available.

3, electronic protection: overcharge, overdischarge, overload and short circuit.

4, anti-current protection: any combination of solar modules and batteries, do not damage any components.

5 Adjustable charging voltage can be set.

Advantages: 

【60A MPPT CHARGING CONTROLLER】 4-stage battery charging algorithm for a rapid, efficient, safe charging(Bulk Charge, Boost Charge, Float Charge, and Equalization), 60amp Rate Charging current.

【Controller WIDE RANGE SOLAR VOLTAGE/POWER SUPPORT】Controller supports High PV Input Power/voltage. The controller can accept Solar voltage up to 190V. When battery is 12V system: Suggest Solar power 720W, suggest range:DC20V~DC80V；1440W 105V when 24V; 2100W 150 when 36V; 2800W 150v when 48V.

【12V/24V/36V/48V BATTERY SUPPORT】Negative grounding design controller safer, controller Compatible with a variety of batteries(lead-acid and lithium, User customize); Sealed, Gel, Flooded and LI (LFP) battery charging parameter pre-set, other battery can be customize charging parameter according to your need.

【0 layer MPPT charge controller】Easy to know the Charging process in one glance.

【FULL CHARGING PROTECTIONS】Short Circuit/Overcurrent/Reverse Polarity, etc. protections; a Very detailed LCD screen and 4 buttons make this solar controller very simple to use. And detailed troubleshooting list, Fast service support, and Simple and detailed wiring instruction are available.

Feature:

→This controller features a smart tracking algorithm that maximizes the energy from the solar PV module(s) and charges the battery. At the same time, the low voltage disconnect function (LVD) will prevent the battery from over-discharging.

→The 0 layer's charging process has been optimized for long battery life and improved system performance.

→Electronic protection: Overcharging, over-discharging, overload, and short circuit

→Reverse protection: Any combination of solar module and battery, without causing damage to any component

→Controller charging happens when solar panels' voltage is higher than batteries.

→Lithium Battery Activation: this has a reactivation feature to awaken a sleeping lithium battery. The 0 layers will apply a small charge current to activate the protection circuit and if a correct cell voltage can be reached, it starts a normal charge.

Technical specification

Electronic parameter

Model :POW-M60-PRO

Nominal system voltage :12V/24V/36V/48V automatic identification

Rated battery current :60A

Rated load current :6A

Maximum capacitive load capacity :10000μF

Battery voltage: 9V-70V

Maximum solar input voltage :160V DC (25℃), 155V DC (-25℃)

Maximum power point voltage range: battery voltage +2V to 120V

Maximum solar input power:

     At 12V, 720W 20V-80V DC;

     At 24V, 1440W 37-105V DC;

     At 36V, 2100W 50-160V DC;

     At 48V, 2800W 72-160V DC.

Automatic loss :0.7W - 1.2W

Conversion efficiency :≤ 98%

Maximum power point tracking efficiency :>99%

Temperature compensation :-3mV/° C /2V (default)

Conventional information

Model :POW-M60-PRO

Size :230× 165 × 72mm (9.1× 6.5 × 2.8in)

Mounting hole :4×φ10mm

Maximum connector size :16mm2 /5AWG

Net weight: 1.33kg / 2.9lbs

Operating temperature :-35° C to +45° C

Humidity range :≤95%(NC)

Case :IP32

Altitude :<3000m

Please Note:

Communication is the best way to solve the problem. If you have any problems after purchasing, please contact us in time, before opening return or case.We will reply and solve the problem for you within 24 hours. Hope we all have a pleasant shopping experience, wish you a happy and healthy life!