new (stock) thread inserts original Helicoil® Plus from Böllhoff , for thread repair M8 metric standard thread right, please select number above

 

slope 1.25

Length 12mm (x1.5D) when installed

Material: stainless steel

Material version A2, 1.4301, X5 CrNi1810

Surface colored green

corrosion and temperature resistant

highly resilient

wear resistant

Type Helicoil Plus Free Running

Number of turns before installation 7.4

Max. Screw-in depth with the driving pin not broken off 11.4mm

Core hole Ø 8.4mm

Item no. 413000800012

The nominal length of the thread insert corresponds to the minimum length of the fully cut out receiving thread for blind holes, or the minimum plate thickness for a through hole. 

Please note that the specified length is only determined when installed! 

In order to achieve a greater depth in the thread, with a little skill you can screw in several thread inserts one after the other.

 

Shipped from original large packaging in outer packaging

 

Matching tap M8 original Böllhoff Helicoil® can be found in our eBay shop

 

German industrial quality from Böllhoff

 

Special items from business cessation

Many other items such as thread cutters, thread formers, lathe tools, reamers, metal circular saw blades, machine saw blades, countersinks, milling cutters, thread cutting devices, centering points, etc. can be found in our eBay shop

Shipping within Germany takes place with DHL / Deutsche Post
new (stock) thread inserts original Helicoil® Plus from Böllhoff , for thread repair M8 metric standard thread right, please select number above The nominal length of the thread insert corresponds to the minimum length of the fully cut out receiving thread for blind holes, or the minimum plate thickness for a through hole.  Please note that the specified length is only determined when installed!  In order to achieve a greater depth in the thread, with a little skill you can screw in several thread inserts one after the other. Matching tap M8 original Böllhoff Helicoil® can be found in our eBay shop Many other items such as thread cutters, thread formers, lathe tools, reamers, metal circular saw blades, machine saw blades, countersinks, milling cutters, thread cutting devices, centering poi
new (stock) thread inserts original Helicoil® Plus from Böllhoff , for thread repair M8 metric standard thread right, please select number above The nominal length of the thread insert corresponds to the minimum length of the fully cut out receiving thread for blind holes, or the minimum plate thickness for a through hole.  Please note that the specified length is only determined when installed!  In order to achieve a greater depth in the thread, with a little skill you can screw in several thread inserts one after the other. Matching tap M8 original Böllhoff Helicoil® can be found in our eBay shop Many other items such as thread cutters, thread formers, lathe tools, reamers, metal circular saw blades, machine saw blades, countersinks, milling cutters, thread cutting devices, centering poi