Feature:
1. Pure sine wave inverter
2. Configurable input voltage range for home appliances and personal computers via LCD setting
3. Configurable battery charging current based on applications via LCD setting
4. Configurable AC/Solar Charger priority via LCD setting
5. Compatible with mains voltage or generator power
6. Auto restart while AC is recovering
7.Overload/ Over temperature/ short circuit protection
8. Smart battery charger design for optimized battery performance
9. Cold start function
10.WIFI/GPRS(Option)
11. Can connect to lithium battery
|
MODEL |
POW-HVM3.2H-24V-N |
|
Input Voltage Waveform |
Sinusoidal (utility or generator) |
|
Nominal Input Voltage |
230Vac |
|
Max AC Input Voltage |
300Vac |
|
Nominal Input Frequency |
50Hz/ 60Hz (Auto-detection) |
|
Output Short Circuit Protection |
Circuit Breaker |
|
Efficiency (Line Mode) |
>95% ( Rated R load, battery full charged ) |
|
Rated Output Power |
3200VA/3000W |
|
Output Voltage Waveform |
Pure Sine Wave |
|
Peak Efficiency |
94% |
|
Nominal DC Input Voltage |
24Vdc |
|
Utility Charging Mode |
|
|
Charging Algorithm |
3-Step |
|
AC Charging Current (Max) |
60 Amp |
|
Bulk Charging Voltage |
|
|
Flooded Battery |
29.2 |
|
AGM / Gel Battery |
28.2 |
|
Floating Charging Voltage |
27.0Vdc |
|
MPPT Solar Charging Mode |
|
|
Max. PV Array Power |
3000W |
|
Nominal PV Voltage |
240Vdc |
|
PV Array MPPT Voltage Range |
30-400Vdc |
|
Max. PV Array Open Circuit Voltage |
400Vdc |
|
Max Charging Current (AC charger plus solar charger) |
80Amp |
|
Safety Certification |
CE |
|
Operating Temperature Range |
-10°C to 50°C |
|
Storage temperature |
-15°C~ 60° C |
|
Humidity |
5% to 95% Relative Humidity (Non-condensing) |
|
Dimension (D*W* H), mm |
348X270X95 |
|
Net Weight, kg |
6.5 |
3000W 24V Inverter 's Wiring
Solar Inverter's Charging modes:
Four modes can be chosen when charging the battery:
- Utility first: Utility will charge the battery as first priority source, then Solar Power.
- Solar first: Solar will charge the battery as first priority source, then Utility Power.
- Solar and Utility(default): Solar Power and Utility power will charge the battery at the same time.
- Only Solar: Solar Energy is the only source to charge battery.
Solar Inverter's Inverter output modes
Three Output modes can be chosen:
- Utility first (default):Utility will provide power to theloads as first priority, Then Solar Power, Battery Power
- Solar first: Solar energy provides power to the loads as first priority. If solar energy is insufficient to power all connected loads, utility will supply power to the loads simultaneously，then battery power.
- SBU Priority: Solar energy provides power to the loads as first priority. If solar energy is insufficient to power all connected loads, battery energy will supply power to the loads simultaneously.
Installation
