*NOTE:  SORRY THIS IS LISTED ON EBAY UNDER THE "GLOVES" CATEGORY.  FOR SOME REASON EBAY DOES NOT ALLOW LISTING WITH VARIABLE OPTIONS ANYWHERE IN EBAY MOTORS. 

PLEASE NOTE:  THIS IS A REBUILDING/RESTORATION SERVICE FOR YOUR SHIFTER.  

WE ARE NOT SELLING A SHIFTER IN THIS LISTING.

THIS IS A COMPLETE DISASSEMBLY OF ALL PARTS.

OUR STANDARD SERVICE INCLUDES CLEANING AND PLANNING TO RE-USE ALL INTERNAL PARTS.

HERE IS A DETAILED LIST OF OUR HURST SHIFTER RESTORE/REBUILD SERVICE:

1.)  DISASSEMBLE ALL COMPONENTS

2.)  REMOVE RUST FROM ALL PARTS INSIDE AND OUT

3.)  CLEAN ALL PARTS THOROUGHLY

4a.)  (STANDARD) REPLACE ANY INTERNAL COMPONENTS THAT ARE UNUSABLE FOR ADDITIONAL COST AS NEEDED.    SEE BELOW FOR DESCRIPTION.

4b.)  (OPTIONAL NEW INTERNALS) REPLACE ALL INTERNAL COMPONENTS EXCEPT SHIFT GATES.  SEE BELOW FOR DESCRIPTION.

5.)  (OPTIONAL PLATING) ZINC OR NICKEL PLATE INTERNAL MOVING PARTS EXCEPT SHIMS.  PLEASE SEE DESCRIPTION BELOW.

6.)  (OPTIONAL EASIER REVERSE):  MAKE IT EASIER FOR YOU TO SHIFT INTO REVERSE

7.)  PAINT OUTER CASE, SHIFTER ARM RECEIVER/CARRIER

8.)  CLEAN AND RE-USE SHIFT GATE STOPS OR REPLACE WITH NEW PLATED BOLTS AND NUTS IF APPLICABLE, YOUR CHOICE

9.)  GREASE ALL INTERNAL COMPONENTS WITH HIGH QUALITY, WATER RESISTANT SYNTHETIC MOBIL 1 

10.)  RE-ASSEMBLE ALL PARTS

11.)  TEST UNIT TO MAKE SURE EVERYTHING IS NICE AND SMOOTH.

1 YEAR WARRANTY ON ALL LABOR AND ANY NEW PARTS

  

STANDARD SERVICE:  $150 PLUS COST OF PARTS THAT NEED TO BE REPLACED.  IF YOUR SHIFTER ISN'T WORN AND ALL INTERNAL PARTS ARE IN EXCELLENT WORKING CONDITION AFTER RESTORATION BY US THEN WE DO NOT NECESSARILY NEED TO REPLACE ANY PARTS FOR YOUR SHIFTER TO WORK SMOOTHLY.  HOWEVER, SOME INTERNAL PARTS MIGHT NOT BE RE-USABLE.  

THERE IS NO WAY FOR US TO BE ABLE TO TELL UNTIL WE ACTUALLY DISASSEMBLE YOUR UNIT AND INSPECT YOUR PARTS FOR WEAR.  IF YOU CHOOSE OUR STANDARD SERVICE, WE WILL INFORM YOU OF ANY WORN PARTS THAT NEED REPLACED AND THE ADDITIONAL COST FOR REPLACING THEM BEFORE RE-ASSEMBLY.

OPTIONAL SERVICE:  "ALL NEW INTERNALS" $90 EXTRA

THE OPTIONAL "NEW INTERNALS" SERVICE INCLUDES REPLACING ALL INTERNAL COMPONENTS EXCEPT FOR THE SHIFT GATES (ARMS/LEVERS) WITH BRAND NEW HURST PARTS.  PLEASE SEE THE "ALL NEW INTERNAL COMPONENT" IMAGE TO SEE WHAT PARTS ARE INCLUDED AS NEW WITH THIS OPTION.  IT IS PRETTY MUCH EVERYTHING EXCEPT FOR THE CASE AND GATES/ARMS/LEVERS.  CHOOSE THIS OPTION IF YOU WANT US TO REPLACE ALL PARTS SHOWN IN THE "NEW INTERNALS" 

PICTURE WHETHER YOUR PARTS ARE RE-USABLE OR NOT.

OPTIONAL SERVICE:  ZINC OR NICKEL PLATING (YOUR CHOICE) $40

THE OPTIONAL ZINC OR NICKEL PLATING SERVICE IS FOR PLATING YOUR SHIFT GATES, REVERSE PLUNGER, REVERSE WASHER, REVERSE SPRING, STICK RETURN SPRING, GATE SELECTOR AND PIVOT BUSHING (SEE THE IMAGE THAT SHOWS WHICH PARTS GET PLATED).  YOU CAN ORDER THIS OPTIONAL SERVICE WHETHER WE ARE RE-USING YOUR EXISTING COMPONENTS OR REPLACING WITH THE "NEW INTERNALS" OPTION.  THE GOAL OF THE PLATING IS TO KEEP THE PARTS FROM RUSTING, NOT TO MAKE THEM LOOK SHINY.  WE DO PERFORM A LIGHT POLISHING OF THE PARTS AFTER PLATING TO SMOOTH SURFACES AND MAKE THE PARTS MOVE NICE AND FLUID, BUT NOT SO MUCH POLISHING TO MAKE THEM LOOK LIKE CHROME.  PLEASE SEE THE BEFORE/AFTER OF THE SHIFT GATE/ARM/LEVER TO SEE HOW THEY LOOK AFTER PLATING AND LIGHT POLISHING.

OPTIONAL SERVICE:  EASIER REVERSE $5

THIS OPTIONAL SERVICE THAT WE OFFER IS TO MODIFY YOUR REVERSE PLUNGER SO THAT IT DOESN'T REQUIRE AS MUCH FORCE TO PUT THE SHIFTER INTO REVERSE.  PLEASE BEAR IN MIND THAT FOR A LOT OF APPLICATIONS THERE IS NOT A REVERSE LOCK OUT SO THE EXTRA EFFORT TO PUT THE SHIFTER INTO REVERSE WAS INTENTIONAL SO YOU DON'T ACTUALLY PUT YOUR CAR IN REVERSE.  WE WILL MAKE IT EASIER TO GET INTO REVERSE THAN IT NORMALLY IS, BUT NOT TO THE 

EXTENT THAT IT IS SUPER EASY TO GET INTO REVERSE.

OPTIONAL PARTS:  $5 FOR 3 BUSHINGS.  THESE ARE NYLON SHIFT GATE TO LINKAGE BUSHINGS .  THESE GO IN THE HOLE ON THE SHIFTER GATES WHERE THE LINKAGE GOES THROUGH.

WARRANTY INFORMATION:  WE COVER ALL LABOR FOR 1 YEAR.  WE ALSO COVER ANY NEW PARTS THAT YOU PURCHASE FROM US FOR 1 YEAR.  WE DO NOT WARRANTY ANY PARTS THAT WE-REUSE.  WE DO NOT WARRANTY ANY ABUSE, MIS-USE OR NEGLECT OR RACING APPLICATIONS.  YOU ARE RESPONSIBLE FOR SHIPPING WARRANTY REPAIR ITEMS TO US.  IF FAILURE IS DETERMINED TO BE DUE TO NO FAULT OF YOUR OWN WE WILL COVER SHIPPING CHARGES TO RETURN YOUR SHIFTER TO YOU AFTER WARRANTY REPAIRS ARE MADE. 

TURNAROUND TIME IS USUALLY 7 -10 DAYS AFTER WE RECEIVE YOUR SHIFTER.  PLEASE ASK AT THE TIME OF YOUR ORDER FOR CURRENT STATUS.

PLEASE FEEL FREE TO CONTACT US PRIOR TO ORDERING IF YOU HAVE ANY QUESTIONS OR CONCERNS OR WOULD LIKE TO ASK ABOUT SPECIFIC ISSUES WITH YOUR SHIFTER (IT STICKS, IT HAS TOO MUCH LEFT-RIGHT END PLAY, IT'S NOT STIFF ENOUGH, ETC.).  THAT WILL HELP US GET AN IDEA OF WHAT PARTS WE WILL PROBABLY HAVE TO REPLACE.  PLEASE FEEL WELCOME TO SEND AN IMAGE OF YOUR SHIFTER AS WELL.  WE LIKE BEING ABLE TO GET AN IDEA OF WHAT WE'RE GETTING INTO AND GIVE YOU AN INFORMED ESTIMATE OF REPLACEMENT PARTS.

AFTER YOU PLACE YOUR ORDER, WE WILL GET IN TOUCH TO VERIFY WHAT SERVICES WE ARE GOING TO BE PERFORMING AND GIVE YOUR OUR ADDRESS FOR SHIPPING YOUR SHIFTER TO US.

PLEASE DO NOT SEND SHIFT LEVER, LINKAGE, SHIFT GATE BUSHINGS, CLIPS OR MOUNTING BRACKET.  PLEASE SEND SHIFTER UNIT ONLY.