FOXWELL NT710 Bi-directional Scanner Fit For BMW/Mini/Rolls-Roce --- Full Systems Scanner Automotive Obd2 Code Reader Diagnostic Scan Tool with SRS EPB SAS TPS Oil Reset Battery Registration Active Test , Lifetime Free Update

Poweful Bi-directional Control  Test & Active Test + E-CU Coding

As A Must Have fit For BMW/MINI Cooper/Rolls-Royce Owner Tool, Foxwell NT710 fit for bmw scan tool equipped with active test features, which help you to do a dealer- level diagnostic better.

Featuring bi-directional control, which can output the commands to ECUs, read the ECU data and monitor the operation of the actuators. Through active tests (also called actuator tests), this NT710 bi-directional scanner can precisely locate the car problems, letting you quickly know whether a specific system, component, or subsystem is functioning properly or not, which help you locate faults in the shortest time, saving time on troubleshooting.

For Example, If a fuel pump is not working and leads to ignition failure, it could be a faulty pump, wiring, relay, or command.

By turning the fuel pump on and off via this NT710 fit for bmw, you can quickly determine whether it’s a wiring, relay, or pump issue without removing any parts. Than you may do not need to spend lot of moneys to repair because of a little of problems.

Here are some commonly-used t-e-sts Include:

Switch the interior lights on and off

Turn on/off headlamp

Lock/unlock door

Turn on/off Cooling Fan

Roll window up/down

Turn the Fuel Pump On/Off

Open/Close the Sunroof

Turn on/off the Radiator Fan

Gearbox Matching / Seat Matching / Head light Fitting / Door and Window Initialization Study / Sunroof Initialization / Multimedia Video Reset / Cluster Reset / Tire Change Reset and lots of features waiting for you！

All Maintenance Services Functions

Foxwell NT710 fit for BMW Automotive Obd2 Scanner Code Reader equipped with ALL commonly required service functions, like Oil Reset, ABS Bleeding, SAS Reset,Gearbox Reset, Throttle Body Alignment and much more.

This nt710 fit for bmw is well worth the p-rice and far less than a trip to register a new battery or reset the windows once to the dealer.

A Versatile Scan Tool fit for BMW/Mini owners looking to save on daily repairs and your waitting time at the dealer!

1. Fit For BMW/MINI Cooper Battery Registration/Replacement:

Use the power management system, the battery needs to be re-matched after it is replaced, so that the car computer can recognize the new battery.

Note: Only support the same type&capacity battery; If the type and capacity of battery is not the same, this nt710 fit for bmw only support to register/replace fit for E-chassis BMW cars.

Operating Method: Click in the scanner as follows ：

B/M/W--Smartscan--Service--Body--Battery

Remove old battery--Install new battery -- Enter a new battery 12 digits code--Press the Ok button.

2. ABS Bleeding: When the ABS contains, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity

3. Steering Angle Reset：Perform steering angle sensor and clear records

4. Injector Coding: Also called code, for precise communication and injection control.

5. Electronic Parking Brake: Deactivate and activate the brake control system, assist with brake fluid control, etc.

6. Throttle Adjustment: Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state.

7. More: Oil Light Reset, Language Change, AFS Reset (Adaptive Frontlighting System), TPMS, Sunroof Initialization, Suspension Matching, AFS Reset, A/T Learning, A/F Reset, Stop/Start/NOx Sensor Reset, Tyre Reset, Coolant Bleeding, and More maintenance reset will be released Note: If you encounter incompatibility or defective issues, kindly provide the model, year, Vehicle Information Number , the issue is likely to be fixed via software upgrade.

OE-level All Systems Accurate Diagnosis fit for your Bimmer/Beemer/Mini Cooper

Foxwell N710 fit for BMW is a professional Car Scan Tool for DIYers, enthusiasts, independent repairs, specialized garages and technicians.

NT710 fit for BMW auto obd2 code reader help you to get basic and advanced repairs done on modern cars effectively, to deal with pretty much every auto repair scenario you can think of, which can access all available vehicle modules. Powerful Foxwell Diagnostic Function makes its the working range to over 95% to 100%, not like some low-end handheld tools only support the achieve the function of 60-70%.

1. Drive System: Engine, Transmission, Battery Energy, All wheel, Transfer case, Electrical Machine Electronics, Gear, and more...

2.Chassis System: Accumulator Management Electronics, Steering, Integrated Chassis Management, Tyre Pressure Control, Active Cruise Control, Braking System, Suspension, TPMS and more...

3.BCM(Body System): Gateway, Cluster Dashboard, Rain Sensors, Charging Interface Module, Parking Assistance, Power Control Unit, Touch box, Light, Battery Charging System, Head up Display, Wipe Control System, Roof, Seat & Door Motor, ABS. Windows,more...

4. Electrical System: Including Centralized control system for engine and power transmission, Chassis integrated control and safety system,Intelligent body electronic system,Communication and information/entertainment system...

More High-end New-Added Functions Help you perform a Better Diagnosis

Online Update Free Lifetime -

Different from the complicated the Windows system, NT710 fit for BMW Wifi updating technology is for you to get the newly software anytime. What's more,no need any extra fee, no like other scan tools only support One Year for Free.

10 OBD Function Modes Applies for ALL Brands Vehicles After 1996 -

Not only fit for BMW/ MINI/RR, nt710 fit for bmw Universal code scanner can read and erase error codes, turn off the MIL and I/M readiness, sensor tests, on-board monitoring,read data stream, EVAP system, vehicle information, built in a DTC lookup library for all car brands.

Auto Scan -

One-Click Automatically Read Vehicle Information will auto detect the vehicle information and display vehicle information to save your time of manually entered,more convenience for you.

4-in-1 Live Data Multi-Graphs -

Clearly displaying real-time data in text and graph allows you to view multiple graphs simultaneously or merge 4 graphs in one for comparison.

Bluetooth Share/Send Health Reports -

You can transmit the data reports via E-mail/Bluetooth/Wifi to share or send for save its. Not like the old versions car scanner, must need to connect the printer to get the reports.

Online Feedback and Remote Support -

You can input your issues and submit them online to get the professional troubleshooting from Foxwell. Also can be controlled remote by foxwell technical engineers or the user's friends to handle the problems during diagnostic process to save your time to communicate back and forth.

 

ECU Coding to Customize Your Car, Unlock Hidden Features and Deactivate Annoying Functions

ECU Coding is professional and value-added advanced feature, which allowing you to reset the adaptive data, match the replaced ECUs, unfold the hidden functions, etc.

ECU coding enables multiple electronic system to recognize each other and then the actuators can start to work after you change the bad actuators or certain parts. If you are specialized in the car tuning industry, the ECU coding can be a great plus and give you an edge over peers!

Such As:

Acoustical confirmation

Tuning the ignition time

Tuning the oil injection

Active rear spoiler

Digital speedometer coding

Active cruise control

Remote window control unlocking

And so on.....

Note: At present, Only Support fit for F & E-chassis BMW Cars; NT710 fit for bmw will be continuously update the compatibility of ecu coding