Short description

  • Built-in Trans-HD(TM) Technology for high-definition acoustic transduction.
  • The soundboard transducer produces a natural, warm, and transparent tone.
  • High output, no preamp or battery required.
  • Easy to install with customized None-Surface-Damage adhesive included.
  • Suitable for most acoustic instruments: guitar, bass, ukulele, banjo, violin, mandolin, cajon, Harp.

    Amumu SBT-12 soundboard transducer is a super affordable but powerful pickup for all musicians to amplify his/her acoustic instruments like guitar, bass, ukulele, banjo, violin, mandolin, cajon, Harp, etc. It's easy to install and use, just stick the pickup on the surface of your instrument and connect to your amplifier or PA system, then start to Rock. There are two methods to fix the output jack, one is to hang on the strap-pin but you might not be able to use the strap at the same time, the other is to stick it onto your instrument with the cable tie and saddle mount which are all included in the package.


    SPECIFICATIONS

    Pickup TypePassive
    Jack1/4" Female
    BatteryNo need
    Double-Sided Adhesive PadsFor holding the pickup
    Cable-tieFasten the female jack to the saddle-mount
    Saddle-mountFasten the female jack to your instrument
    Cable HolderPrevent the cable from banging around on the guitar
    Suitable forAcoustic instruments: guitar, bass, ukulele, banjo, violin, mandolin, cajon, harp.

    HOW TO USE

  • Remove the cover of the adhesive on the bottom of the pickup.
  • Stick the pickup onto the soundboard of your instrument.
  • Fasten the female jack to your instrument with the Strap-Button Hole or the included saddle-mount and cable-tie. Put the cable tie through the saddle mount together with the female jack holder's hole, then tighten the cable tie. Remove the cover of the saddle mount, and then stick it to a suitable location.
  • Fix the cable with the small cable holders (Included) anywhere you like to prevent the cable from banging around.
  • Connect your instrument cable to the 1/4'' female jack and your PA/Amplifier.