Eltek 3000 Watt Netzteil
Die Stromversorgung ist auf 52V 60 Ampere eingestellt.
Die Netzteile sind gebraucht, aber in einem sehr gepflegten Zustand und wurden getestet.
Anschlussdetails siehe Fotos.
Spezifikationen:
Ausgangsleistung 3000 W innerhalb der Nennaufnahme
Maximaler Strom 62,5 A bei 48 VDC und Nenneingang
Ausgangscharakteristik 48 – 56V: Konstante Leistung, 3000W
(Die Leistung verringert sich linear unter 176 VAC)
40 – 48 V: Konstantstrom, 62,5 A
(derzeitige Begrenzung)
Foldback auf 12V
Stromaufteilung ±5 % des Maximalstroms von 10 % bis
100 % Auslastung
Statische Spannung
Verordnung
±0,5 % von 10 % bis 100 % Last
Dynamische Spannung
Verordnung
±5,0 % für 10–90 % oder 90–10 % Last
Variation, Regulierungszeit < 300 μs
typical @ 52 VDC
Hold up time > 20 ms minimum, full power (3000W) @
52 VDC
> 500 ms ride thru at 70% of nominal
input
Ripple and Noise o < 250 mV peak to peak, 230 VAC, 40-
100% load
o 20 MHz bandwidth
Output Protection o Overvoltage shutdown:
Immediate >59.5 VDC
Programmable from 44.5 to 59 VDC (only with programmer not included)
o Hot plug-in - Inrush current limiting
o OR-ing FET
o Short circuit protection, foldback
o High temperature protection
o Under-voltage shutdown,
<12V: Foldback