KSP Performance is a professional supplier since 2000, who always supply high quality performance parts with suspension, exhaust system and wheel accessories.
Welcome to discuss bulk order or customize parts.
Providing you the best service and innovative technology always are our pursuing.KSP Performance provide front Upper Control Arms (UCA) for Chevy, GMC, Ford, Dodge, Toyota, Nissan, Jeep and other trucks.
The UCAs are CNC Bent Tubing, CNC Machined Bushing Housings and Sleeves. Usually, when you lift 2 "or more of your truck, OEM control arm would limit suspension travel,which will impact the driving performance.
KSP upper control arms will solve the problem, which is designed for 2-4" lift.
- Correct the ball joint angle for 2-4” front leveling kits
- Constructed from 1.25” DOM tubing
- Maintains stock ride quality
- Instruction included
NOTICE:The 2014-2018 Sierra Silverado 1500 Models Only Fit the stamped steel and Aluminum steel .
NOT work with Factory Cast / Forged Steel Arms due to the different ball joint.
Does not fit stock wheel with 275 or 285 width tires, need to add wheel spacers to avoid tire rubbing control arms
GMC Sierra 1500 2014-2018 (FIT OE stamped steel and aluminum arms )
Chevrolet Silverado 1500 2014-2018 (FIT OE stamped steel and aluminum arms )
- CADILLAC ESCALADE 2015-2020
- CHEVROLET SILVERADO 1500 2014-2018
- CHEVROLET SUBURBAN 2015-2020
- CHEVROLET TAHOE 2015-2020
- GMC SIERRA 1500 2014-2018
- GMC YUKON 2015-2020
- GMC YUKON XL 2015-2020
Measuring Guide:
Measure your stock front and rear heights from the ground to bottom of the trim. The style of level or lift will determine how much height you will need to add to the front or rear. To level your vehicle, add a lift amount equivalent to the difference between front and rear heights.
To lift your vehicle - while retaining the stock look, add the same lift amount to both front and rear.
To level lift your vehicle, add the amount of lift you'd like for the front to the difference between front and rear stock heights and use this for your rear lift.
For example: if your stock height for the front is 23" and rear is 26" to level - add 3" lift to the front or to lift all corners 2" - add 2" to both front and rear.
Important Notice
- All the zerks can fill in grease after some use (pre-greased when you get it)
- Zerk just a decoration, sealed and pre-greased, so do not try to fill in anymore, otherwise you will damage it
- Do not torque the zerk too tight and It can turns to different directions(not must vertical)---the right and left zerks no need to the same directions
- The ball joint could not fill any grease.In order to solve this problem, we will provide a free replacement of the ball joint within 6 months; within one year, you can get the ball joint at half the discount.
- when you buy it,you could communicate with us,we will provide you with detail product information.and we will help you check if our products fit for you car model.
