* Bi-dirrection control test , Active test  

* 34+ special maintanence service functions

* OEM-level All system diagnoses for OBDII/EOBD/CAN vehicles from the wolrd ;

*Full OBDII Function, Compatible with the latest  2019/2020/2021/2022 OBDII/EOBD/JOBD/CAN car models from the world ;

* Can perform brake deactivation, adaptation and service reset

* Gets access to powertrain, chassis and body systems

* Reads and clears diagnostic trouble codes and resets MIL

* Requests and records live sensor data

* Provides live data graphing

* Merges graphs for easy and intuitive diagnosis

* Displays freeze frame data

* Retrieves ECU information

* Runs component/system bi-directional tests

* Supports adaptations and control module coding on selected cars

* Shows live sensors data in text and graph format

* TF memory card for data backup and software update

* Ergonomic design and ruggedly built for both shop and road tests

* Clutch Adaptation , EGR Adaptation, EGR Adaptation

* Fuel Injector Equalisation, Valvetronic Adaptation

* Fuel Injector Adjustment, Idle Speed Adjustment,

* Bleed Vanos, Test Vanos, Glow Plug Heater Test

* 5.5 inch TFT touch screen and Android 9.0 operating system

Bi-directional Control Test --- Quickly Pinpoint the Car Problems
 
 Bi-directional Control, also named Active Test/Actuator Test, improves 2x faster efficiency to problems location and diagnostic accuracy.

The NT710 scanner sends a command to ECU and checks vehicle status to pinpoint the problems  . Commonly used to check Engine, Powertrain, Body Computers, Fuel Control Systems, ABS, Transmission, Windows, Doors, Sunroof, Lights, etc. Examples as:

    A/C compressor clutch relay
    Active grille air shutter system
    Engine controls ignition relay
    Engine speed/throttle
    Switch cylinder correction off/on
Turn the radiator fan off/on

 Professional OE-Level Full System Diagnostics --- Troubleshoot All Hidden Problems

The automotive diagnostic scanner NT710 , being capable of doing the OE-Level full system diagnostics, any problems that can damage your car are not allowed to hide. After numerous tests, we are sure that diagnostics done by NT710 are as same deep and complete as the OE diagnosis tool of car makes.

Full System Diagnostics: The NT710 is able to diagnostic systems include but not limited to the following systems

(Both auto scan and individual module scan are supported):

    Drive: Motor Electronics/ISM-Shift Module/Transmission Control/Exhaust System/Fuel Pump
    Chassis: Electric Stability/AMF Drive Unit/Adaptive Damping System/Electric Power Steering/Multifunction Steering Wheel
    Body: Supplemental Resistance System/Central Gateway/Electronic Ignition/Steering Column Module/Multifunction Control Unit/Sunroof/Tailgate Control/Weight Sensing System/Headlamp/Rear signal acquisition and actuation module/Trailer recognition module/ Seats and Doors/ Adaptive Directional Headlights/ Convertible Top Module/ Light Switching Center
    Information and Communication: Instrument Cluster/Rear Entertainment System/Navigation/Audio/Sound/Multifunction Camera/Digital Audio Broadcasting/Drive Kit for iPhone/Radio/Diver Assistance System/Park Distance Control

    OE-Level Diagnostics: The scanner NT710  can diagnose cars comprehensively and fully without resorting to any other equipment or consulting high-end technicians for guide. The functionality is advanced and complete while the operation process is quiet easy.

Professional Full Service Functions For HONDA Vehicles

- Maintenance Light Reset: Reset the oil service lamp after changing the engine oil; Re-calculate the optimal oil life change interval for the engine oil maintenance being on schedule.

- Steering Angle Calibraction: Reset the steering angle to zero to keep the car running straight.

- Injector Coding: Write the new injector code into the car system for the correct cylinder injection quantity.

- Electronic Parking Brake Reset: Help replace and reset the brake pad. - ABS Bleeding: Help ex-haust the air in ABS system in an easy way.

- Throttle Matching: Initialize the throttle actuators to the default state.

- Battery Matching: Register the battery after replacement.

- Diesel Particulate Filter Regeneration: Help remove the particulate matter to keep the trap stable.

- Anti-theft diagnostic/matching: Disable any lost keys to prevent the car from being stolen, and add new keys.

- Tire Pressure Reset: Reset the tire pressure.

- Suspension Level Calibration: Adjust the vehicle body height sensor for level calibration.

- Headlight Matching: Initialize the adaptive headlamp system.

- Gearbox Matching: Help complete the gearbox self-learning to improve gear shifting quality.

- Tooth Learning and EGR Adaption, ODO Reset, Sunroof Initialization, Airbag Reset, Transport Mode, A/F Reset, Stop/Start Reset, NOx Sensor Reset, AdBlue Reset (Diesel Engine Ex-haust Gas Filter), Seat Calibration, Coolant Bleeding, Tire Reset, Windows Calibration … still expanding.

 Full OBDII Check 
Besides diagnosis All systems, NT710 car code reader also includes all what a popular OBDII scanner has. To own NT710 diagnostic tool, to save an odb2 scanner for you.

    Reading Codes: Present some diagnostic trouble codes after scanning the vehicle.
    Erase &Resetting Codes: Clear the fault codes after doing the repair according to the prompt of the scanner.Resetting
    Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
    Freeze Frame: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
    On-Board Monitor Test: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
    O-2 Sensor Test: Allows retrieval and viewing of O-2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer. (Note: If the vehicle uses a controller area network (CAN) protocol to communicate, this function is not supported by vehicle)
    On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
    Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
    Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability
    I/M Readiness Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing. (MIL Status/Misfire Monitoring/Fuel System/Comprenensivr component/catalyst monitoring/EGR System Monitoring/Oxy-gen Sensor Heater Monitoring/Oxy-gen sensor Monitoring/Secondary air system/Evaporative System/Heated catalyst)

Smart Record, Data Callback is Ready for You!

--- 4 in 1 Live Data Stream: You can check the car conditions with the detailed data & graph in a intuitive view. Allows you to view graph simultaneously and merge 4 of them in one graph to compare.

--- Data Record & Playback: Recording the diagnostic troubles and playback them for further check or compare is a convenient way to repair the car faults. No need to diagnose the vehicle once again. Also can show these data to the repair shop workers when you can not solve these problems by yourself.

--- Online Feedback & Suggestions: You can submit your issues with detailed files & attachments in real-time. Foxwell professional technician will reply you after check the details. Touching the icon on the top to access to the submit page.

--- Diagnostic Report: All the diagnostic results can be generated to a report. Save the diagnostic troubles and enter into “Data Manager”--- “Report” to save it to a PDF file. And then you can transfer the report you want via E-mail/ Bluetooth/ Printer(Warm tips: The printer can be available when connect into a same Internet).

-- Multi-Languages : The device only can install 2 languages , one is English , the other one you can choose from the following---  Korea, Spanish, Portuguese, French,Swedish, English, Dutch, Japanese, Italian, German,Russian, Hungarian, Greek

English is Default Language, if you need other language, please send me the SN Number when you receive it (please register account and activation the sn number first), I will help you change it. 

Product Parameter
• Screen Size: 5.5 inch Touch Screen
• Resolution: 1280*720 pixels
• CPU: 4-core 1.3GHz processor
• RAM: 1GB
• ROM: 32GB
• WiFi: 802.11b/g/n 2.4GHz
• USB: TYPE-C
• OBD II Input voltage range: 9~18V
• Power up via: DC 5V data cable or Diagnostic cable through connection to vehicle's DLC
• Working Temperature: -10℃ to 70℃ 
• Storage Temperature: -20℃ to 80℃
• Battery: 4000mAh  

Package List:

1 X NT710  Main Unit
1 X  OBDII Cable
1 X USB Charging Adapter
1 X Quick Start Guide
1 X User’s Guide
1 X Warranty Card