FOXWELL NT710 Fit for Mercedes-Benz Sprinter,Upgraded NT510 Diagnostic Tool OBD2 Scanner, Bidirectional Scan Tool Rodeo Test, Full System Car Diagnostic Scanner, All Service Reset Airmatic Suspension
| FOXWELL NT710 Features and Benefits |
| Bi-directional Scan Tool/ Active Test |
Foxwell NT710 mercedes Bidirectional scanner allows you to use the scan tool temporarily activate or control a vehicle system or component and to check of the electronic components such as switches, sensors, relays, and actuators.
For example, if "Press Brake Pedal" displays, you have to press and hold the brake pedal and then continue. The sequence, number and type of tests are dictated by the control module.
- Auto Bleed Test/ Automated Bleed
- ABS Pump Motor Test
- Fuel Injector Pump/ Fuel Trim Reset
- Window/Mirror/ Door Lock/ Horn
- Cycle A/C Clutch On/Off
- Air Conditioning Test
- Wiper Test
- Interior & exterior lights Test
- Sound horn Test
- Brake Bleed Preparation Test + ABS Manual Control Tests + Fuel Composition Reset + EVAP Test + Idle Relearn + Injector Buzz Test + Pump and Value Tests + VGT Turbo Calibration......
| OE-Level All System Diagnostic |
-BCM Battery check module, ASK Audio system controller,
-AHL Adaptive directional headlights, EKPS fuel-pump control,
-CD-GW Control Display(Gateway), CEM Clean Energy Module,
-CIM Chassis Integration Module, DKG Twin-clutch gearbox,
-FLA High Beam Assist, IHKA Heater/automatic A/C control,
-RLSS Rain/light solar sensor, SHD Sliding/tilting sunroof,
-HKL Rear-lid lift, BMBT On-board monitor, control panel,
-DSM Hybrid parking lock, INSTR Instrument cluster,
-NVK Night Vision camera, PDC Park Distance Control,
-RDW tyre-blowout warning, RFK Reversing camera,
-ADS(Throttle-valve control), DWA anti-theft alarm system,
-EDC Damper Control, KLE Convenience Charge Electronics
| 35+ Maintenance service functions |
- ABS bleeding Anti-lock Braking System
- SRS light Reset
- SAS Steering Wheel Angle Sensor calibration
- EPB Electronic Parking Brake service reset,including deactivation and activation of the brake control system, bleeding brake fluid, opening and closing brake pads, and setting brakes after disc or pad replacement
- Oil service reset ,Allows you to reset the service lamps on the instrument cluster
- Diesel Particulate Filter (DPF ) Regeneration : Allows you perform the DPF cleaning to clear the blockage through continuous burning of the particulates captured in the DPF filter, When a DPF regeneration cycle is completed, the DPF light automatically goes off.
- TPS / TBA ( Throttle body Alignment )
- Battery register / Configuration , adapt battery after replacing.
- Electronic Parking Brake Reset: Help replace and reset the brake pad. - ABS Bleeding: Help exhaust the air in ABS system in an easy way.
- Throttle Matching: Initialize the throttle actuators to the default state.
- Battery Matching: Register the battery after replacement.
- Diesel Particulate Filter Regeneration: Help remove the particulate matter to keep the trap stable.
- Anti-theft Matching: Disable any lost keys to prevent the car from being stolen, and add new keys.
- Tire Pressure Reset: Reset the tire pressure.
- Suspension Level Calibration: Adjust the vehicle body height sensor for level calibration.
- Headlight Matching: Initialize the adaptive headlamp system.
- Gearbox Matching: Help complete the gearbox self-learning to improve gear shifting quality.
- Tooth Learning and EGR Adaption, ODO Reset, Sunroof Initialization, Airbag Reset, Transport Mode, A/F Reset, Stop/Start Reset, NOx Sensor Reset, AdBlue Reset (Diesel Engine Exhaust Gas Filter), Seat Calibration, Coolant Bleeding, Tire Reset, Windows Calibration … still expanding.
| All OBDII/EOBD Functions |
Mode 02 --- Request freeze frame information.
Mode 03 --- Request emissions-related diagnostic code.
Mode 04 --- Clear/reset emissions-related diagnostic information.
Mode 05 --- Request oxygen sensor monitoring test results.
Mode 06 --- Request on-board monitoring test results for specific monitored systems.
Mode 07 --- Request emission-related diagnostic trouble codes detected during current or last completed driving cycle.
Mode 08 --- Request control of on-board system, test or component.
Mode 09 --- Request vehicle information.
Mode 0A --- Request emissions-related diagnostic trouble codes with permanent status after a clear/reset emission-related diagnostic information.
| Multi-languages |
| Product parameter |
• Resolution: 1280*720 pixels
• CPU: 4-core 1.3GHz processor
• RAM: 1GB
• ROM: 32GB
• WiFi: 802.11b/g/n 2.4GHz
• USB: TYPE-C
• OBD II Input voltage range: 9~18V
• Power up via: DC 5V data cable or Diagnostic cable through connection to vehicle's DLC
• Working Temperature: -10℃ to 70℃
• Storage Temperature: -20℃ to 80℃
| Package List |
1 * User Manual
1 * Carry case
