XY-ABT

Description:

XY-ABT is a MP3 Bluetooth-compatible Decoder Module.Dual channels audio signal output. It is ideal for DIY wireless Bluetooth-compatible speakers and transponders.

It can work with APP Sinilink which can display can monitor the current voice source and switch Equalizer.

Features:

1.2 audio input modes

2.Bluetooth-compatible automatic re-connection

3.Dual channel stereo output

4.APP Bluetooth-compatible control

5.Battery charge controller

6.MP3 lossless decoding

Parameters:

1.Product Name:XY-ABT Bluetooth-compatible Decoder Module

2.Product Number:XY-ABT

3.Working Voltage:DC 5V

4.Control Type:Bluetooth-compatible/APP Sinilink Control

5.Audio input type:Bluetooth-compatible/U-disk

6.Bluetooth-compatible version:BLE 5.0

7.Communication distance:15meter(Max)

8.Channel:Dual channel stereo output

9.Working Temperature range:-40℃~85℃

10.Working Humidity Range:5%-95%RH

11.Module Size:30*30*7mm

Use steps:

1.Choose the right speaker and connect as shown in wiring diagram.

2.Connect to right power supply from input terminal.LED indicator will flashing and it means that module enters pairing mode.And then speak prompt voice and it means that module is waiting for pairing.

3.Turn ON Bluetooth-compatible in phone.

4.Select Bluetooth-compatible device ‘XY-ABT’ in your Bluetooth-compatible device listing.

5.LED indicator will keep ON and it means that module is successfully connected and is waiting for playing.

6.Module will playing music after select music in phone.LED indicator will keep slowly blinking.Note: It is a music decoder so it needs connect to amplifier and then connect speaker.

7.Play or pause by press button.

8.Open APP Sinilink and register an account if need control by APP.

9.Click the dot on the right.

10.Select ‘Con Blu Dev’ and then Search Bluetooth-compatible.

11.Select devices ‘Sinilink-APP’ to connect module.

12.User can adjust volume,select next or previous,play/pause and select EQ.

13.Module will speak prompt voice if disconnected.

Application:

1.Modified speaker

2.Amplifier equipment

3.Car Bluetooth-compatible device

Note:

1.The power amplifier board should be as far away as possible from the WIFI signal (router) avoid signal interference.

2.It is a music decoder so it needs connect to amplifier and then connect speaker.

3.Please don’t use too long wires to avoid signal interference.

4.The format of U-disk must be FAT32 and the maximum memory is 32G.

5.The module can charge 3.7V/4.2V lithium battery, but does not support charging or discharging protection function.

6.The micro USB can be used input work voltage if module has connect 3.7V/4.2V rechargeable lithium battery at two power supply pads.

7.It needs input work voltage from two power supply pads if connect a U-disk as audio source.

8.Please read use manual and description before use.

XH-A250

Product introduction:

This product is suitable for connecting the power amplifier board, which can realize the Bluetooth-compatible wireless connection of the audio input end of the power amplifier board; it has strong Bluetooth-compatible signal receiving (20 meters unobstructed connection), lossless sound quality, simple and practical. The power input adopts the Android Micro USB interface, the voltage is 5V, and the audio output is 3.55mm audio head, which is convenient to use!

Parameters:

1.Product model: XH-A250

2.Input voltage: 5V

3.Audio input: Bluetooth-compatible input (0-15m)

4.Audio output: 3.5mm audio socket

5.Power connector: Micro USB

6.Operating Temperature:-20℃~85℃

7.Operating Humidity:5%~95%RH

8.Module Size:35*35*7.4mm

Steps:

1. Connect the power input to the 5V power supply; (the power interface is adapted to the Android Micro USB interface). After the power is turned on, the power indicator blue light will flash.

2. Connect the audio output to the post effect.

3. Connect the audio output of the rear amplifier to the speaker.

4. Turn on the Bluetooth-compatible of the mobile phone and search for the Bluetooth-compatible device. XH-Electronics will be selected to match it. After the Bluetooth-compatible connection is successful, the blue light of the power indicator will stop flashing and it will be displayed as long light.