Instructions:

       Before operation

       1. The power supply must have a secure grounding system, and the cable should not be replaced by itself.
       2. It is very important to check whether all the components are in good condition, especially if the mask is installed in place (whether the nut is pressed), otherwise it is difficult to start the     equipment.

 
       Operation process

       1. Wash the orange before pressing the juice and put in the top frame.
       2. Connect the power and turn on the switch.
       3. After the machine is in operation, the oranges can be fed into the feeding port continuously, and fresh orange juice will flow out quickly.
       The machine automatically extracts the juice, filters the filter residue, and the peel is automatically transferred to both sides of the peel bucket.

       The end

       At the end of each day (for example, the restaurant hotel juice bar, etc.), it is recommended to clean it to ensure the cleanliness and freshness of the next day.
       1. Power must be cut off (unplug)
       2. Open the mask
       3. Remove the blade, shaper, bump, and clean (clean water)
       4. After cleaning, reinstall it according to the corresponding order, so that it can be re-opened next time.

Specifications

        Power supply: 220V 50HZ
        Power parameter:120W
        Output：22-25 oranges/per minute
        Machine Size：400*270*770 mm
        Gross weight：47kg 
        Material: Stainless Steel + Plastic
        Weight：about 47kg