Some of the vehicles need add bulb adapter (Not inclued) to get the LED bulbs replace the halogen bulbs.
For some vehicles, it may require install decoder or load resistor to avoid error message, turn signal hyper flash or fast blinking.
Detail
Compatible With:
2x H4 Bulbs
Wedge bulb type: 501 (W5W)
Specifications
1. Condition: 100% Brand New / Never Used
2. Voltage: DC 9-32V ( Fit 12V,24V Vehicle )
3. IP Rate: IP67
4. LED type: Brand COB LEDs
5. Beam Angle: 360°
6. Color Temperature: 6000K-6500K White
7. Operating Life: >50000hrs
8. Operating Temperature: -40 - +80°C
9. Application: High/Low Beam Head Lights
10. Number of Bulbs:4
11. To Fit: High/Low Beam Head Lights KIt
12. Placement on Vehicle: Left,Right,Front
Package Content:
2 x H4 white 100w bulbs plus 2 x 501 sidlight white bulbs.
For some vehicles, it may require install decoder or load resistor to avoid error message, turn signal hyper flash or fast blinking.
Detail
Compatible With:
2x H4 Bulbs
Wedge bulb type: 501 (W5W)
Specifications
1. Condition: 100% Brand New / Never Used
2. Voltage: DC 9-32V ( Fit 12V,24V Vehicle )
3. IP Rate: IP67
4. LED type: Brand COB LEDs
5. Beam Angle: 360°
6. Color Temperature: 6000K-6500K White
7. Operating Life: >50000hrs
8. Operating Temperature: -40 - +80°C
9. Application: High/Low Beam Head Lights
10. Number of Bulbs:4
11. To Fit: High/Low Beam Head Lights KIt
12. Placement on Vehicle: Left,Right,Front
Package Content:
2 x H4 white 100w bulbs plus 2 x 501 sidlight white bulbs.
*Note:
Bulbs are non-canbus so a load resistor may be required if you have the canbus system to prevent any repeat flickering or dashboard errors & are also subject to availability & may change.
Features:
1.100% New / Never Used and Well Packaged in Retail Box
2.Built-in Fans, No Other Fans & Ballasts Required
3.Beam Angel: 360 Degrees
4.Color Temperature： 6000K White
5.Low Power Consumption than Halogen bulb, Energy Saving
6.Low Voltage Protection, High Precision Constant Current driver Chip
7.Shakeproof and Long lasting up to 100,000 Hours.
8.Easy installation
9.Operating Temperature: -40°C ~ +80°C
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Bulbs are non-canbus so a load resistor may be required if you have the canbus system to prevent any repeat flickering or dashboard errors & are also subject to availability & may change.
Features:
1.100% New / Never Used and Well Packaged in Retail Box
2.Built-in Fans, No Other Fans & Ballasts Required
3.Beam Angel: 360 Degrees
4.Color Temperature： 6000K White
5.Low Power Consumption than Halogen bulb, Energy Saving
6.Low Voltage Protection, High Precision Constant Current driver Chip
7.Shakeproof and Long lasting up to 100,000 Hours.
8.Easy installation
9.Operating Temperature: -40°C ~ +80°C
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.