Details
Introduction:
This is a kind of single-cylinder, four-stroke gasoline engine, having the advantages of small size, light, smooth running and easy maintenance. It is suitable for powering industrial and agricultural machines, such as electric generators, rototillers, threshers, grinders, rice transplanters and water pumps, etc.
Specifications:
Fuel Type: Gasoline
Lube oil capacity: 0.6L
Fuel tank capacity: 3.6L
Max. Torque: 10.8N-m
Borexstroke: 68*45mm
Displacement: 160cc
Engine Type: Air Cooled, 4 Stroke Gasoline Engine, OHV, Single Cylinder
Horsepower: 6.5HP (4.8kw)
Speed: 3600rpm
Fuel consumption rate: 360g/kw.h
Starting system: Pull Start
Lube oil capacity: 0.6L
Fuel tank capacity: 3.6L
Max. Torque: 10.8N-m
Borexstroke: 68*45mm
Displacement: 160cc
Engine Type: Air Cooled, 4 Stroke Gasoline Engine, OHV, Single Cylinder
Horsepower: 6.5HP (4.8kw)
Speed: 3600rpm
Fuel consumption rate: 360g/kw.h
Starting system: Pull Start
Professional Installation is Highly Recommended.
Features:
Overhead valve (OHV) design
Low fuel consumption, low operating temperature, high performance.
Low fuel consumption, low operating temperature, high performance.
Large capacity air filter
Improve air filtration performance and reduce wear.
Improve air filtration performance and reduce wear.
Metal cam, forged crankshaft
The whole machine adopts high-quality materials, with stronger performance and longer life.
The whole machine adopts high-quality materials, with stronger performance and longer life.
Cast iron cylinder liner
Easy to start，engine running more stable.
Easy to start，engine running more stable.
Operation:
A. PRE-OPERATION CHECK
Engine oil level
1. Running the engine with insufficient oil can cause serious engine damage.（Please add 0.6L of oil before use and start.）
2. Be sure to check the engine on a level surface with the engine stopped.
3. Using nondetergent oil or 2-stroke engine oil could shorten the engine's service life.
B. STARTING THE ENGINE
1. Turn the fuel valve to the ON position.
2. Move the chock lever to the CLOSED position.
Note: Do not use the choke if the engine is warm or the air temperature is high.
3. Move the throttle control lever slightly to the left.
4. Start the engine with recoil starter: Turn the engine switch to the ON position.
C. OPERATION
1. As the engine warms up,gradually move the choke lever to the OPEN position.
2. Position the throttle control lever for the desired engine speed.
CAUTION:
Indicates a possibility of personal injury or equipment damage if insrtuctions are not followed.If these rules are not obeyed,the promise will be invalid,and it is possible for accidents of fatal danger to occer.
1. In order to make the engine work efficiently,the output and working speed of the engine should match the driven machines.Running the engine with low load or at low speed over a long period of time is ABSOLUTELY FORBIDDEN as well as running with over load or at over speed.
2. The gasoline and the lubricating oil of specified grades are to be used.They should be completely precipitated and filtered before use.Any utensils used herein should be kept clean. The lubricating oil must be periodically changed.
3. Frequently check the bolts mounting and connecting the engine and the bolts in the engine,if loose,tighten them.
4. Clean the air filter reguarly,change the air filter cartridge if necessary.
5. It is an air-cooling gasoline engine, to keep the engine in the best cooling condition,clean the radiating gills,air guiding cover and fan if there is any dust.
6. The operator should know the principle and the framework of the engine,maintenance the engine regularly,and eliminate defects in time.
7. Don't touch parts of high temperatures such as the silencer, when the engine in use.Or you may be scalded.
WARNING:
To ensure safe operation
1. Always make a pre-operation inspection before you start the engine. You may prevent an accident or equipment damage.
2. To prevent fire hazards and to provide adequate ventilation, keep the engine at least meter (3 feet) away from buildings and other equipment during operation. Do not place flammable objects close to the engine.
3. Children and pets must be kept away from the area of operation due a possibility of burns from hot engine components or injury from any equipment the engine may be used to operate.
4. Know how to stop the engine quickly, and understand the operation of all controls. Never permit anyone to operate the engine without proper instructions.
5. Do not place flammable objects such as gasoline,matches, etc., close to the engine while it is running.
6. Refuel in a well-ventilated area with the engine stopped. Gasoline is highly flammable and explosive under certain conditions.
7. Do not overfill the fuel tank. There should be no fuel in the filler neck. Make sure that the filler cap is closed securely.
8. If any fuel is spilled, clean it up completely and allow petroleum vapours to dissipate before starting the engine.
9. Do not smoke or allow flames or sparks where the engine is refueled or where gasoline is sotred.
10. Exhaust gas contains poisonous carbon monoxide. Avoid inhalation of exhaust gases. Never run the engine in a closed garage or confined area.
11. Place the engine on a stable surface. Do not tilt the engine more than 20 form horizontal. Operating at excessive angles may result in fuel spillage.
For more details, please refer to the instruction manual.
We only ship the item to PayPal verified shipping address. Please make sure your shipping address is the same as PayPal, no changes are allowed once the order is shipped.
All USA location orders will be shipped out via USPS or UPS or Fedex with a tracking number. We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.
We do not cover any import Duty and Tax. Customer should be responsible for the Import tax. Contact us , we will try our best to help minimize it.
HK/TW buyer please notice us your government ID #.
BRA,AR,PER buyer leave us your CPF#,CUIT#,RUC# correspondingly.
We accept Paypal only for the payment thru ebay, please do not pay directly to our Paypal account.
Paypal allows to pay by Credit Card, Direct Debit, VISA, eCheck, or other methods, please kindly check Paypal for more information.
For multiple purchases, please add items to your Ebay shopping cart and pay once for entire order.
Please kindly contact us before return, our representatives will send you detail return instruction.
The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.
Product View
Details
Introduction:
This is a kind of single-cylinder, four-stroke gasoline engine, having the advantages of small size, light, smooth running and easy maintenance. It is suitable for powering industrial and agricultural machines, such as electric generators, rototillers, threshers, grinders, rice transplanters and water pumps, etc.
Specifications:
Fuel Type: Gasoline
Lube oil capacity: 0.6L
Fuel tank capacity: 3.6L
Max. Torque: 10.8N-m
Borexstroke: 68*45mm
Displacement: 160cc
Engine Type: Air Cooled, 4 Stroke Gasoline Engine, OHV, Single Cylinder
Horsepower: 6.5HP (4.8kw)
Speed: 3600rpm
Fuel consumption rate: 360g/kw.h
Starting system: Pull Start
Lube oil capacity: 0.6L
Fuel tank capacity: 3.6L
Max. Torque: 10.8N-m
Borexstroke: 68*45mm
Displacement: 160cc
Engine Type: Air Cooled, 4 Stroke Gasoline Engine, OHV, Single Cylinder
Horsepower: 6.5HP (4.8kw)
Speed: 3600rpm
Fuel consumption rate: 360g/kw.h
Starting system: Pull Start
Shaft diameter:20mm
Shaft length:5cm
Professional Installation is Highly Recommended.
Features:
Overhead valve (OHV) design
Low fuel consumption, low operating temperature, high performance.
Low fuel consumption, low operating temperature, high performance.
Large capacity air filter
Improve air filtration performance and reduce wear.
Improve air filtration performance and reduce wear.
Metal cam, forged crankshaft
The whole machine adopts high-quality materials, with stronger performance and longer life.
The whole machine adopts high-quality materials, with stronger performance and longer life.
Cast iron cylinder liner
Easy to start，engine running more stable.
Easy to start，engine running more stable.
Operation:
A. PRE-OPERATION CHECK
Engine oil level
1. Running the engine with insufficient oil can cause serious engine damage.（Please add 0.6L of oil before use and start.）
2. Be sure to check the engine on a level surface with the engine stopped.
3. Using nondetergent oil or 2-stroke engine oil could shorten the engine's service life.
B. STARTING THE ENGINE
1. Turn the fuel valve to the ON position.
2. Move the chock lever to the CLOSED position.
Note: Do not use the choke if the engine is warm or the air temperature is high.
3. Move the throttle control lever slightly to the left.
4. Start the engine with recoil starter: Turn the engine switch to the ON position.
C. OPERATION
1. As the engine warms up,gradually move the choke lever to the OPEN position.
2. Position the throttle control lever for the desired engine speed.
CAUTION:
Indicates a possibility of personal injury or equipment damage if insrtuctions are not followed.If these rules are not obeyed,the promise will be invalid,and it is possible for accidents of fatal danger to occer.
1. In order to make the engine work efficiently,the output and working speed of the engine should match the driven machines.Running the engine with low load or at low speed over a long period of time is ABSOLUTELY FORBIDDEN as well as running with over load or at over speed.
2. The gasoline and the lubricating oil of specified grades are to be used.They should be completely precipitated and filtered before use.Any utensils used herein should be kept clean. The lubricating oil must be periodically changed.
3. Frequently check the bolts mounting and connecting the engine and the bolts in the engine,if loose,tighten them.
4. Clean the air filter reguarly,change the air filter cartridge if necessary.
5. It is an air-cooling gasoline engine, to keep the engine in the best cooling condition,clean the radiating gills,air guiding cover and fan if there is any dust.
6. The operator should know the principle and the framework of the engine,maintenance the engine regularly,and eliminate defects in time.
7. Don't touch parts of high temperatures such as the silencer, when the engine in use.Or you may be scalded.
WARNING:
To ensure safe operation
1. Always make a pre-operation inspection before you start the engine. You may prevent an accident or equipment damage.
2. To prevent fire hazards and to provide adequate ventilation, keep the engine at least meter (3 feet) away from buildings and other equipment during operation. Do not place flammable objects close to the engine.
3. Children and pets must be kept away from the area of operation due a possibility of burns from hot engine components or injury from any equipment the engine may be used to operate.
4. Know how to stop the engine quickly, and understand the operation of all controls. Never permit anyone to operate the engine without proper instructions.
5. Do not place flammable objects such as gasoline,matches, etc., close to the engine while it is running.
6. Refuel in a well-ventilated area with the engine stopped. Gasoline is highly flammable and explosive under certain conditions.
7. Do not overfill the fuel tank. There should be no fuel in the filler neck. Make sure that the filler cap is closed securely.
8. If any fuel is spilled, clean it up completely and allow petroleum vapours to dissipate before starting the engine.
9. Do not smoke or allow flames or sparks where the engine is refueled or where gasoline is sotred.
10. Exhaust gas contains poisonous carbon monoxide. Avoid inhalation of exhaust gases. Never run the engine in a closed garage or confined area.
11. Place the engine on a stable surface. Do not tilt the engine more than 20 form horizontal. Operating at excessive angles may result in fuel spillage.
For more details, please refer to the instruction manual.
We only ship the item to PayPal verified shipping address. Please make sure your shipping address is the same as PayPal, no changes are allowed once the order is shipped.
All USA orders will be shipped out via USPS, UPS or Fedex with a valid tracking number. We do not ship to P.O. Boxes, APO/FPO or Military Mail Boxes.
We do not cover any import Duty and Tax. Customer should be responsible for the Import tax. Contact us , we will try our best to help on minimizing it.
For HK/TW buyers, please notify us your government ID #.
For BRA,AR,PER buyers, please leave us your CPF#, CUIT# or RUC# correspondingly.
We accept Paypal only for the payment thru ebay, please do not pay directly to our Paypal account.
Paypal allows to pay by Credit Card, Direct Debit, VISA, eCheck, or other methods, please kindly check with Paypal for more information.
For multiple purchases, please add items to your Ebay shopping cart and pay once for the entire order.
Please kindly contact us before returning your order(s), our representatives will send you the detailed instructions.
Our guarantee is only for the cost of the item, we will not be responsible for any other expenses such as installation, labor, towing, repair or any other related expenses.
On Dec 24, 2023 at 17:51:18 PST, seller added the following information:
On Jul 11, 2024 at 21:07:23 PDT, seller added the following information:
On Jul 16, 2024 at 00:06:13 PDT, seller added the following information: