XIAO ESP32S3 |
x1 |
Plug-in camera sensor board |
x1 |
Antenna |
x1 |
Item |
Seeed Studio XIAO ESP32S3 |
Seeed Studio XIAO ESP32S3 Sense |
Processor |
ESP32-S3R8 Xtensa LX7 dual-core,32-bit processor that operates at up to 240 MHZ |
|
Wireless |
Complete 2.4GHz Wi-Fi subsystem BLE: Bluetooth 5.0, Bluetooth mesh |
|
Built-in Sensors |
/ |
oV2640 camera sensor for 1600*1200 Digital Microphone |
Memory |
On-chip 8M PSRAM & 8MB Flash |
On-chip 8M PSRAM & 8MB Flash |
lnterface |
1x UART,1x IIC,1x llS,1x SPl,11xGPIOs (PWM),9x ADC,1x User LED,1x Charge LED 1x Reset button,1x Boot button |
1x UART,1x lIC,1x lIS,1x SPI,11x GPIOs (PWM),9xADC,1x User LED, 1x Charge LED,1x B2B Connector(with 2 additional GPIOs) 1x Reset button, 1x Boot button |
Dimensions |
21 x 17.5mm |
21 x 17.5 x 15mm (with expansion board) |
Power |
Input voltage (Type-C): 5V lnput voltage (BAT): 4.2V |
|
Circuit operating Voltage (ready to operate): - Type-C:5V@19mA - BAT: 3.8V@22mA |
Circuit operating Voltage (ready to operate): -Type-C:5V@38.3mA - BAT:3.8V@43.2mA(with expansion board) |
|
/ |
Webcam Web application:
- Type-C:
- - Photo moment: 5V/341mA - - Photo moment: 3.8V/304mA |
|
/ |
Microphone recording & SD card writing:- Type-C: - - Peak power consumption: 5V/89.6mA
- Battery: - - Peak power consumption: 3.8V/108mA |
|
Charging battery current:50mA |
Charging battery current:100mA |
|
Low Power Consumption Model (Supply Power: 3.8V) |
Modem-sleep Model:~25mA Light-sleep Model:~2 mA Deep Sleep Model:~14 μA |
Modem-sleep Model:~44mA Light-sleep Model:~5mA Deep Sleep Model:~3mA |
Wi-Fi Enabled Power Consumption |
Active Model:~ 100 mA |
Active Model:~ 110 mA(with expansion board) |
BLE Enabled Power Consumption |
Active Model:~85 mA |
Active Model:~102 mA(with expansion board) |
Working Temperature |
-40°C ~65°C |