Greetings!!  I know the informative verbiage that follows is lengthy so I want to point out for those who may not read the description in its entirety, that the threaded metal adapter shown in a couple of photos (inserted in the end of a tube) are available for free if you ask me, but they will not be included unless requested. These are needed if your bottle is missing the nipple where the tube attaches, in other words, you just have a threaded hole in your sprayer. They can also be used if your bottle originally took a threaded bulb without a tube but you want to switch it to have a long tube with a bulb at the end.   PLEASE NOTE that the "tube" I refer to is technically a fabric covered plastic hose. :)

This listing is for oval bulb/tube sets in various fabric colors with either gold or silver metal bulb and tube end caps. The metal color is noted following the color name in the drop down list which is followed by the shape of the bulb itself.  

Until further notice, I am completely out of MUSTARD and PURPLE bulbs with tubes.  I have those colors in my Standard Bulb listing in my store, but not with the long tube.  These colors are marked OUT OF STOCK on the main display photos.

All tubes measure approximately 5" long X 0.25" in diameter, not including the bulb. Please note that I am happy to shorten any tube length to your specifications. (See photo for example of red shortened cord)

The oval bulbs measure 2" long X 1.25" not including the length of the tassel.  The tassels measure approximately 2.75" to 3" long and can be removed if you prefer.

The tubes are rubber push-on (female opening) types that will attach to most male nipples on your sprayer. In the very rare cases where the tube is a bit too large for your hardware, you can simply wrap a bit of Teflon tape around the male fitting on your bottle in order to get the tube to fit securely.

If your bottle has only a bulb and you are wanting to replace it with a bulb and long tube or if your bottle only has a threaded hole on the sprayer with nothing to slip the tube onto, I may have a solution.  I have threaded nipple adapters and I can install one into the end of the tube you purchase at no charge so you can hopefully then screw the tube into your bottle.  Just shoot me a message and let me know when you make your purchase.  The adapters only come in one standard size and they will screw into most any female opening that is approximately 1/8" (3 mm) in diameter. (See photos with gold tube/bulb for example.)

If your opening is slightly larger than 1/8" (3 mm) in diameter, an easy solution for a good fit is to wrap a bit of Teflon tape around the screw threads until it fits securely into your bottle.

If you are unsure of the exact size screw fitting you need, I have a slightly unorthodox way for you to verify if these adapters will screw into your sprayer.  You'll first want to remove a screw from a wall plate covering an outlet or light switch in your home.  Then take the little flathead screw that held the plate in place and gently try to start to screw it into the opening on your sprayer.  DO NOT FORCE IT.  The thread pitch on the plate screw differs from the thread pitch of the adapters so the screw won't screw into your sprayer and it doesn't need to.  We are only checking the size of the opening, so if the plate screw starts to catch in the opening in your sprayer, then chances are the adapter will work just fine for your sprayer. 

I have been collecting and repairing vintage atomizers for more than 25 years and am happy to answer any questions or concerns you may have at any time so please do not hesitate to contact me. I'm also happy to help with troubleshooting; no purchase required. (Please allow me a day or so to respond to messages seeking assistance fitting or repairing an atomizer. Those responses generally take me some time to write and usually I find that time late in the evening when I have some quiet time.)   I am passionate about vintage scents, perfume bottles and atomizers and I look forward to helping you make your atomizer functional again.  And I absolutely commend you for trying to restore a vintage bottle.  The world needs more of those vintage beauties in it!

If for any reason you are not satisfied with your purchase, especially if it doesn't fit, please let me know so I can address your concerns.  It is important to me that you be satisfied, therefore you may always return your purchase for a full refund as long as it is in the same condition as when you received it.