FY6900 20MHz-100MHz Function Signal Generator Arbitrary Waveform Meter TFT Screen Dual Channel Digital Frequency Count Source
Features:
1. The display interface adopts 2.4-inch TFT color LCD, which makes the operation more intuitive and convenient.
2. The instrument USES direct digital frequency synthesizer (DDS) technology to provide stable, accurate, pure and low-distortion signals.
3. Rich keyboard shortcuts and graphical user interface simplify each operation, easy to operate.
4. Surface mount technology can improve anti - interference and service life.
5. The instrument USES A 14-bit high D/A conversion chip (5Vpp output quantization error less than 1mV), A sampling rate of 250MSa/s, and A vertical resolution of 14bit.
6. Various modulation types: AM, FM, PM, ASK, FSK and PSK modulation.
7. Scanning function: four properties of the scannable signal, including frequency, amplitude, offset and duty cycle; It has two kinds of Linear and Logarithm scanning type; Scanning time: 0.01S-9999.99S; Up, down and round trip scanning directions.
8. VCO function (voltage control output): it can be realized by external input signal: voltage control frequency, voltage control amplitude, voltage control offset, voltage control duty ratio and PWM modulation.
9. Function of 100M frequency meter: it can measure frequency, period, pulse width and duty ratio. The frequencies that work are 100MHz and Min. Frequency behavior: 0.01 Hz.
10. Counter function: there are 2 coupling measurement modes, including DC coupling and AC coupling. This design can solve the inaccurate problem of ac coupling.
11. Output short circuit protection: when the load short circuit, all channels can work for more than 60 seconds.
Specification:
Item Type: Signal Generator
Material: Plastic
Model: FY6900
Frequency parameter
Frequency Range:
Sine wave: 0Hz~100MHz
Square wave: 0Hz~25MHz
Triangle wave: 0Hz~10MHz
Sawtooth wave: 0Hz~10MHz
Frequency range of arbitrary waves: 0 ~ 10MHz
TTL / CMOS digital wave range: 0~20MHz
Minimum width adjustment of pulse wave: 20ns
Hey. Frequency resolution: 1μHz (0.000001Hz)
Frequency error: (+/-) 20ppm
Frequency stability: (+/-) 1ppm / 3 hours
Waveform parameters:
Waveform types: sine wave / triangle wave / square wave / sawtooth wave, Lorentz pulse wave and arbitrary waveform.
Arbitrary wave non-volatile storage (64): 64 user-defined arbitrary waveforms can be stored
Waveform length: 8192Points (4K points) x14Bits
Sampling rate: 250MSa / s
Vertical resolution: 14 bits
Sine wave:
Harmonic arrival system: ≥50dBc (<1MHz); ≥45dBc (1MHz 20MHz ~)
Distortion: <0.5% (20dB to 20Hz to 20dBm)
Square wave
Lifting time: ≤7ns (VPP <5V)
Overshoot: ≤5%
Duty cycle adjustment range: 0.1%~99.9%
Sawtooth wave
Linear: ≥98% (0.01Hz~10KHz)
Pulse wave
Pulse width adjustment range: 10nS~1S
TTL output
Flat rise/fall time: ≤10ns
Flat range: > 3Vpp
Fanout: > 8 TTL load
CMOS output
Low level: <0.3 V
High level: 1V~12V level rise/fall time: ≤18ns
Output parameters:
Amplitude range (peak-to-peak):
Frequency ≤ 5MHz: 1mVpp-24Vpp
5MHz10MHz frequency > 20MHz: 1mVpp-5Vpp
Amplitude resolution: 1mV
Amplitude stability: (+/-) 0.5% / 5 hours
Amplitude flatness: (+/-) 5% (<10MHz); (+/-) 10% (> 10MHz)
Waveform output:
Output impedance: 50Ω (+/- 10%) (typical)
Protection: All signal outputs can work above 60s in case of load short circuit
DC offset:
Offset adjustment range:
Frequency ≤ 20MHz: ±10V
Frequency > 20MHz: ±2.5V
Offset resolution: 0.01V
Phase adjustment range: 0~359.99°
Phase resolution: 0.01°
External measurement:
Frequency measurement range: GATE-TIME = 1S 1Hz-60MHz
Input voltage range: 2Vpp~20Vpp
Counting range: 0~4294967295
Count: manual
Regular measurement: 20ns resolution, maximum measurable 40s
Scanning function:
Scan mode: linear scan, logarithmic scan
Scanned objects: frequency, amplitude, offset, and duty cycle
Scan time: 0.01s-999.99S / step
Frequency setting range: starting point and ending point can be set freely
Frequency sweep range: determined by scan parameter settings
General parameters:
RAM
Quantity: 20
Location: M0~M20
interface
Interface mode: use USB to serial interface
Communication rate: 115200bps
Protocol: Using the command line, the protocol is common
power supply
Voltage range: AC 100~240V
Display type: 2.4in TFT color display
Ambient temperature: 0~40 °C
Humidity: <80%
Specification of FY6900 Series:
Frequency |
|||||||||
Model |
FY6900-20M |
FY6900-30M |
FY6900-50M |
FY6900-60M |
|||||
Sine |
0~20MHz |
0~30MHz |
0~50MHz |
0~60MHz |
|||||
Square |
0~15MHz |
0~25MHz |
0~25MHz |
0~25MHz |
|||||
Ramp, Triangle |
0~10MHz |
0~10MHz |
0~10MHz |
0~10MHz |
|||||
Pulse |
0~10MHz |
0~10MHz |
0~10MHz |
0~10MHz |
|||||
TTL/CMOS |
0~10MHz |
0~10MHz |
0~10MHz |
0~10MHz |
|||||
Arbitrary Waveform |
0~10MHz |
0~10MHz |
0~10MHz |
0~10MHz |
|||||
Minimum pulse width |
20ns(All models of pulse wave minimum width can reach 20ns) |
||||||||
Min. Resolution on all frequency range |
1μHz (Min. resolution can reach 1μHz on all frequency range to ensure adjusting accuracy under high frequency. For example, it can output 10.000000000001MHz signal). |
||||||||
Accuracy |
±20ppm |
||||||||
Stability |
±1ppm/ 3hours |
||||||||
Waveform Characteristics |
|||||||||
Waveforms |
Sine, Square,Rectangle (Duty Cycle adjustable), Pulse (Pulse width and cycle time can be set accurately), Triangle/Ramp, Sawtooth Wave, CMOS, Four channels TTL, DC, Half wave, Full wave, Positive Step, Inverse Step, Positive Exponent, Inverse Exponent, Lorenz Pulse, Multitone, Noise, ECG, Trapezoidal Pulse, Sinc Pulse, Narrow Pulse, Gauss White Noise, AM, FM, and other 64 sets customer-defined waveform. |
||||||||
Non-Volatile Storage |
Can store 64 user-defined arbitrary waveforms, (8K 14bits) * 64 |
||||||||
Waveform Length |
8192points * 14bits |
||||||||
Sampling Rate |
250MSa/s |
||||||||
Vertical Resolution |
14 bits |
||||||||
Sine |
Harmonic Suppression |
≥50dBc(<1MHz); ≥45dBc(1MHz~20MHz); |
|||||||
Total Harmonic Distortion |
<0.5% (20Hz~20kHz,0dBm) |
||||||||
Rectangle |
Rise/Fall Time |
≤7ns (VPP<5V) |
|||||||
Overshoot |
≤5% |
||||||||
Duty Cycle |
0.01%~99.99% (Resolution 0.01%) |
||||||||
Sawtooth wave |
Linearity |
>99% (0.01Hz~10kHz) |
|||||||
Output characteristics |
|||||||||
Amplitude(VPP) |
Frequency≤5MHz: 1mVpp~24Vpp; 5MHz<Frequency≤10MHz: 1mVpp~20Vpp; 10MHz<Frequency≤20MHz: 1mVpp~10Vpp; Frequency>20MHz: 1mVpp~5Vpp; |
||||||||
Resolution |
1mV |
||||||||
Amplitude Stability |
±0.5%/ 5 Hours |
||||||||
Amplitude flatness |
±2.5%(<10MHz);±5%(>10MHz); |
||||||||
Waveform Output |
|||||||||
Impedance |
50Ω±10%(Typical) |
||||||||
Protection |
All channels can work more than 60 seconds when the load is short-circuited. |
||||||||
DC Offset |
|||||||||
Offset Range |
Frequency≤20MHz: ±12V;Frequency>20MHz: ±2.5V; |
||||||||
Offset Resolution |
1mV |
||||||||
Phase Feature |
|
||||||||
Phase range |
0~359.99° |
||||||||
Phase resolution |
0.01° |
||||||||
TTLOutput |
|
||||||||
TTL Level Amplitude |
>3Vpp |
||||||||
Fan-out |
>8 TTL LOAD |
||||||||
Rise/Fall Time |
≤10ns |
||||||||
CMOSOutput |
|||||||||
Low Electric Level |
<0.3V |
||||||||
High Electric Level |
1V~12V |
||||||||
Rise/Fall Time |
≤18ns |
||||||||
External Measurement |
|||||||||
Function |
Frequency, Period, Positive/Negative Pulse Width, Duty Cycle |
||||||||
Input Voltage Range |
1Vpp~20Vpp |
||||||||
Frequency Meter |
Resolution |
0.01Hz(Gate Time = 100S) |
|||||||
Range |
0.01Hz~100MHz |
||||||||
Sensitivity |
Gate Time 3 grades (1S, 10S, 100S) adjustable |
||||||||
Counter |
Range |
0-4294967295 |
|||||||
Coupling |
DC, AC |
||||||||
Working Mode |
Manual |
||||||||
Period |
Measurement Range |
5ns ~ 20s |
DC coupling measurement |
||||||
Pulse Width |
Measurement Range |
0ns ~ 20s |
|||||||
Resolution |
5ns |
||||||||
Duty Cycle |
Range (Display) |
0% ~ 100% |
|||||||
Sweep |
|||||||||
Carrier Waveform |
Sine, Square, Ramp, Arbitrary(except DC) |
||||||||
Sweep Type |
Linear or Logarithm |
||||||||
Sweep Direction |
Up, Down and roundtrip sweep directions; |
||||||||
Sweep Objects |
Frequency, Amplitude, Offset, Duty Cycle |
||||||||
Sweep Time |
0.01S~999.99S/Step |
||||||||
Setting range |
Starting position and Finishing position can be set arbitrarily. |
||||||||
Sweep Range |
Decided by Parameters setting. |
||||||||
VCO (Voltage Control Output) |
|||||||||
Modulation signal range to input |
0~5V |
||||||||
VCO signal frequency range |
0-2000Hz |
||||||||
VCO control object |
voltage controlling frequency (VCF), voltage controlling amplitude (VCA), voltage controlling offset, voltage controlling duty cycle. |
||||||||
VCO special function |
Can Amplitude Modulate (AM) or Frequency Modulate (FM) by external analog signal. |
||||||||
Modulation |
|||||||||
Modulation Type |
AM, FM, PM, ASK, FSK, PSK |
||||||||
Carrier Waveform |
Sine, Square, Triangle, Ramp, Arbitrarywaveform (Except DC) |
||||||||
AM |
|||||||||
Source |
Internal (CH2) / External (VCO IN Port) |
||||||||
Modulating Waveform |
Sine, Square, Triangle, Ramp, Arbitrarywaveform |
||||||||
Depth |
0% to 120% |
||||||||
Modulating Frequency |
Internal :1μHz~1MHz; External: 1μHz~2KHz; |
||||||||
FM |
|||||||||
Source |
Internal (CH2) / External (VCO IN Port) |
||||||||
Modulating Waveform |
Sine, Square, Triangle, Ramp, Arbitrarywaveform |
||||||||
Modulating Frequency |
Internal :1μHz~1MHz; External: 1μHz~2KHz; |
||||||||
PM |
|||||||||
Source |
Internal (CH2) / External (VCO IN Port) |
||||||||
Modulating Waveform |
Sine, Square, Triangle, Ramp, Arbitrarywaveform |
||||||||
Phase Deviation |
0° to 360° |
||||||||
Modulating Frequency |
Internal :1μHz~1MHz; External: 1μHz~2KHz; |
||||||||
ASK |
|||||||||
Source |
Internal (CH2), External (ASK IN Port), Manual |
||||||||
Modulating Waveform |
Square with 50% duty cycle. |
||||||||
Key Frequency |
1μHz~10MHz |
||||||||
FSK |
|||||||||
Source |
Internal (CH2), External (FSK IN Port), Manual |
||||||||
Modulating Waveform |
Square with 50% duty cycle. |
||||||||
Key Frequency |
1μHz~10MHz |
||||||||
PSK |
|||||||||
Source |
Internal (CH2), External (PSK IN Port), Manual |
||||||||
Modulating Waveform |
Square with 50% duty cycle. |
||||||||
Key Frequency |
1μHz~10MHz |
||||||||
Burst Function |
|||||||||
Carrier Waveform |
Sine, Square, Ramp, Arbitrary(except DC) |
||||||||
Burst Count |
1~1048575 |
||||||||
Trigger Source |
Manual, Internal, External (AC/DC) |
||||||||
General Specifications |
|||||||||
Display |
Type |
2.4 inch, TFT Color Display. |
|||||||
Save & Load |
Amount |
20 |
|||||||
Position |
01 to 20 (01 forstart default value) |
||||||||
Interface |
Type |
USB to Serial interface |
|||||||
Protocol |
Command line mode, providing communication protocols. |
||||||||
Communicating Speed |
9600bps (Industrial standard) |
||||||||
Power |
Voltage Range |
AC100V~240V |
|||||||
Technic |
SMD, LSI, Reliable and durable |
||||||||
Buzzer |
Can be turned on/off by setting. |
||||||||
Operation |
Buttons and knob continuously. |
||||||||
Environment |
Temp.:0~40℃,Humidity:﹤80% |
||||||||
Size |
200mm * 190mm * 90mm (L * W * H) |
||||||||
Weight |
850g |
||||||||
Package Size |
25cm * 21cm * 10cm(L * W * H) |
||||||||
Package Weight |
0.98kg(Main engine, accessories and packing materials) |
Product Picture and Application:
Package List:
1 x FY6900 Signal Generator (Frequency has 20MHz 30MHz 40MHz 50MHz 60MHz 80MHz 100MHz optional)
1 x USB Cable
1 x Power Cable
1 x BNC-BNC Cable
2 x BNC-Clip Cable