BeagleBone Green Development Board
Features:
Fully Compatible with BeagleBone® Black
Processor: AM335x 1GHz ARMR Cortex-A8
512MB DDR3 RAM
4GB 8-bit eMMC on-board flash storage
3D graphics accelerator
NEON floating-point accelerator
2x PRU 32-bit microcontrollers
Connectivity:
USB client for power & communications
USB host
Ethernet
2x 46 pin headers
2x Grove connectors (I2C and UART)
Software Compatibility:
Debian
Android
Specification:
Processor: AM335x 1GHz ARMR Cortex-A8
RAM: 512MB DDR3
on-board Flash Storage: 4GB eMMC
CPU Supports: NEON floating-point & 3D graphics accelerator
Micro USB Supports: powering & communications
USB: Host 1
Grove Connectors: 2 (One I2C and One UART)
GPIO: 2 x 46 pin headers
Ethernet: 1
Operating Temperature: 0 ~ 75 degree
Hardware Overview:
USB Host - USB Host
DC Power and USB Client - Power the board and act as client
LEDs
D2 is configured at boot to blink in a heartbeat pattern
D3 is configured at boot to light during microSD card accesses
D4 is configured at boot to light during CPU activity
D5 is configured at boot to light during eMMC accesses
Boot button
When there's a SD card insert, the system will boot from SD card first, if you want to boot from eMMC, press this button and then power on.
Use as a normal button after boot, connect to GPIO_72
I2C Grove Interface - Connected to I2C2
Uart Grove Interface - Connected to UART2
Serial Debug - Connect to UART0, PIN1~PIN6: GND, NC, NC, RX, TX, NC, note that pin1 is near to the USB.
BeagleBone Wireless Development Board
Features:
Fully Compatiable with BeagleBone® Black
Processor: AM335x 1GHz ARM® Cortex-A8
512MB DDR3 RAM
4GB 8-bit eMMC on-board flash storage
3D graphics accelerator
NEON floating-point accelerator
2x PRU 32-bit microcontrollers
Connectivity:
USB client for power & communications
USB host with 4-port hub
WiFi 802.11 b/g/n 2.4GHz
Bluetooth-compatible 4.1 with BLE
2x 46 pin headers
2x Grove connectors (I2C and UART)
Software Compatibility:
Debian
Android
Specification:
Processor: AM335x 1GHz ARMR Cortex-A8
RAM: 512MB DDR3
on-board Flash Storage: 4GB eMMC
CPU Supports: NEON floating-point & 3D graphics accelerator
Micro USB Supports: powering & communications
USB: USB2.0 Host *4
Grove Connectors: 2 (One I2C and One UART)
GPIO: 2 x 46 pin headers
Ethernet: Wi-Fi 802.11b/g/n 2.4GHz and Bluetooth 4.1 LE
Operating Temperature: 0 ~ 75 degree