|
6500-310 Smart Low-Flow Heater 5.5kW w/Hi-Limit Sensor for Sundance/Jacuzzi Spa
- 【SPECIFIC APPLICATION】This 6500-310 Smart Low-Flow Heater Assembly is compatible with 1995+ Sundance/Jacuzzi Spas 650-850 & 880 Series with Low-Flow Heaters. It is also used on 2015+ Jacuzzi J-400 & J-500 Spas. Package includes Black Low-Flow Heater, 1/4” Sensor 6600-168, 2*Heater Wires, an extra 3/4”ID Tubing.
- 【ITEM SPECIFICATION】Connection: 3/4” Barbed Fittings; Voltage: 240V; Wattage: 5.5kW. High Limit Sensor: BX9407 - 6600-168; High Limit Switch: BX9615 - 6000-093.
- 【PERFECT REPLACEMRNT】This Smart Low-Flow Heater can perfectly replace for the following part numbers—58030, 58336, 307878, 323810810, 2-00-0066, 26-3314-1-7T-K, 26-3411-1-7T-K, 46-355-3025, 46-555-1000, 46-555-1010, 6500-301, 6500-310, 6500-316, 6500-843, 9143E, C2783-1, C3314-1, C3411-1, E2550-1000, E2550-3314, HTR6500301, SD6500-301.
- 【SUPERIOR MATERIAL】The Smart Low-Flow Heater Assembly is made of high-quality steel, copper, rubber and plastic. With strong durability, corrosion resistance and anti-rust performance. Better quality allows it to be used for a longer time.
- 【100% SATISFACTION GUARANTEE】We are committed to providing excellent products and the best service for our customers. If you are not satisfied with the product, you can simply return it. We support a 30-day full refund on return and a 12-month warranty.
INSTALLATION STEPS - (1) Set the spa temperature to off and turn off spas circuit breaker. Using a voltmeter, confirm the electrical power has been disconnected to the spa before performing this service. Drain spa water or pinch water supply tubing to stop water from draining while performing heater replacement.
- (2) Carefully disconnect heater power and ground wires, high limit sensor and water supply tubing from the existing heater. Remove heater mounting nuts from cabinet sidewall and remove old heater.
- (3) Install the provided universal adaptor plug "A" or "B" that matches the connection on original heater (Ref. Dia #1).
- (4) Run universal plug wiring and high limit cord through cabinet access holes and mount the new heater assembly to the cabinet sidewall.
- (5) Reconnect plumbing tubes and tighten clamps for leak free connection to heater barbs. Refill spa or remove tubing pinches to allow water flow. IMPORTANT This is a good time to clean or replace your filters, as clogged or dirty filters and inspect circ pump and flow switch for debris as this can reduce water flow and/or prevent proper heater circuit operation. Purge air from the heater before connecting heater electrical wires to terminal.
- (6) Install power wires/plug and ground wire to original connection points on board or terminal strip.
- (7) When all installation steps are complete, restore spa power at the breaker, turn on pumps and confirm water flow through the heater.
- (8) Inspect for leaks at the heater inlet/outlet tubing connections.
- (9) Program spa heat setting to a desired temperature, then verify the system and heater operate properly together by using the "VDS" amber light in the operations section of this manual.
1. Payment methods accepted: Our payment account allows you to pay by Payonner, credit card, debit card and your Paypal balance.
2. All major credit cards are accepted through our secure payment processor Paypal.
3. We ship items to Your ebay address.Please make sure it is correct before you pay,cause it cannot be changed once your order shipped out.
1. Item will be shipped within 1 business day after your payment cleared.
2. Item will be shipped by USPS/UPS.
3. Delivery time depends on destination and other factors,please feel free to contact us by email if you cannot get your order in time.
Please read the shipment and payment detail carefully before you pay.
1. Return to us within 60 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice)
2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake.And all NON-seller mistake returns for refund are subject to 20% re-stocking fee.
3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Please include your ebay item number or order number in all communications.We will respond within 1 business day or less.We apologize for the late reply during the holidays.Thank you for your understanding.
Our office hours is as below :
- 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
- 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday
And our office is closed on Sunday and public holidays (Hong Kong)
|
