Upgrade your Topargee H2F-BT12 Bluetooth Water Tank Gauge with this specialised 12V Adapter Kit. Perfectly designed for caravans, camper trailers, motor homes, and boats, this comprehensive kit offers a reliable power source, replacing the need for traditional AA batteries. Elevate your water management experience and stay in control, no matter where your adventures take you.

Key Features:

• Tailored for Travel: Specifically crafted for caravans, camper trailers, motor homes, and boats, this kit enhances your water management system with accurate readings and reliable power. Whether you're on the road or on the water, you'll have the information you need at your fingertips.
• The kit includes a purpose-built voltage reduction module with a 10cm output cable that directly plugs into the Bluetooth module of the H2F-BT12 water tank gauge. Additionally, a fused 2m long input cable is included, which can be expertly hardwired into your vehicle's electrical system, ensuring a steady power connection.
• Voltage Flexibility: The input voltage range for the adapter kit is between 5 Volts and 28 Volts, accommodating various power sources. The output is precisely regulated to a stable 3 volts, ensuring optimal performance of your water tank gauge.
•  Keep your cables organised and neat using the 10 cable ties provided (5x 100mm, 5x 200mm), giving your setup a clean and efficient look.
• Australian Craftsmanship: This kit is proudly made in Australia, reflecting quality and attention to detail that's built to withstand the rigours of travel.

Compatibility:

Designed exclusively for the Topargee H2F-BT12 Bluetooth Water Tank Gauge, this kit ensures a seamless integration with your water monitoring setup.

Installation Instructions:

1) Locate the Topargee H2F-BT12 Bluetooth Water Tank Gauge Module, remove the battery cover and the 2x AA Batteries.

2) Remove the battery tray by unscrewing the small Phillips screw.

3) Disconnect the battery housing from the Bluetooth Module by pressing the small plastic button on the 2-pin connector.

4) Connect the 2-pin plug on the short, 10cm output cable from the adapter kit to the Bluetooth module’s 2-pin connector plug, that was disconnected in step 3.

5) Isolate the vehicles battery form the electrical system: Please note, When hard wiring the Bluetooth Adapter Kit, it is best to disconnect or isolate the vehicles battery or batteries, by removing the negative cable from the battery to prevent accidental short circuits.

6) Hard wiring the input cable: Connect the RED wire to a DC Positive (+) power source and the BLACK wire to a DC Negative (-) power source. 

(For safe and optimal performance, professional installation is recommended for hard-wiring the 2m input cable into your vehicle's electrical system)

6) Use the included cable ties to tidy up cables, maintaining an organised and clean installation.

Package Contents:

• 1x 12V Adapter Kit with a fixed 10cm Output Cable for the Bluetooth module connection and a fused fixed 2m Input Cable for hard wiring to a 12V DC power source.
• 10x Cable Ties (5x 100mm, 5x 200mm) 
• 2x 3A Fuses (5x20mm)