20 Slice Dental Lab Splint Thermoforming Material for Vacuum Forming 0.8mm Weight:350g Length :12.5cm Width:12.5cm Machine used, for retainer High quality material sizes: 0.8mm / 20pcs 20 Slice Dental Lab Splint Thermoforming Material for Vacuum Forming 1.0mm Size:1.0mm /20pcs Type: Hard Machine used, for retainer High quality material product specifications Thickness (mm):0.88~1.15 Length :127±2mm Width:127±2mm Slice Amount:20Pcs Material:hard plastic sheet 15 Slice Dental Lab Splint Thermoforming Material for Vacuum Forming 1.5mm Size: 1.5mm/15pcs Type: Hard Machine used, for retainer High quality material Package Contents: 1 Box/ 15 pcs 10 Slice Dental Lab Splint Thermoforming Material for Vacuum Forming 2.0mm 5" x 5" sheet Machine used, for retainer High quality material sizes: 2.0mm / 10pcs 7 Slice Dental Lab Splint Thermoforming Material for Vacuum Forming3.0mm Machine used, for retainer High quality material sizes: 3.0mm / 7pcs Application It is mainly used to shape the shape of the oral cavity. It needs to be used with vacuum torque. - - -Tears the protection film from two sides Splint. --Heat the splint on the vacuum beforehand. - - -Put the mold tray on the slices remove from Vacuum formrt after heating. -/Cool the piece. Preventive measure Do not place in high temperature place Please pay attention to your finger scratches when using this product. Peel off the surface scratch-resistant protective film when using Take note: Please allow slight measurement deviation due to manual measurement. Due to differences in photographic light, product batches and monitor settings, the color of the actual product you will receive may be slightly different from what you see on your computer monitor, please understand |