Accuracy |
0.001mm |
Lifetimeoftouchpoint |
3,000,000 times |
Touch Power |
1.3N-2.4N |
Protection Instruction |
IP67 |
Journey |
4mm |
Protection of knife travel |
Normal close |
Material for cutter face |
Aluminum |
Cable |
Tensile strength 20N Minimum bending radius R7 |
Protective tube |
304 stainless steel hose 2m Minimum bending radius R25 |
Output mode |
NC( normally closed ) |
Features |
Bottom magnetic seat |
Note:
The tool and the tool set contact surface must be vertical, and vertical downward contact with the contact surface, as far as possible installed on the workbench less iron filings, so as not to affect the accuracy of the tool set.
Features:
1. You can clean up debris. Small hole automatic wind. More convenient to use, improve work efficiency.
2. Waterproof and dustproof structure, with good durability in CNC machining operations.
3. It can greatly improve the tool setting efficiency in CNC machining.
4. When the stroke is exceeded, it will sound an alarm.
5. Automatic detection of tool damage: If the tool is damaged or broken, the machine will automatically stop running and issue a warning.
Dust and water proof. durable
Dust proof and waterproof design, in the case of coolant, iron filings flying, can also adhere to stable work.
No built-in amplification required
It will not cause deviation due to the temperature and voltage fluctuation of the power supply at the location of the tool, and can be directly input to the NC program
Timely response to alarm signals
The alarm signal can be issued in time when the overtravel, so as not to cause other trouble when the equipment is working, more convenient to use!
High accuracy. Strong anti-jamming
The sharp Angle of the tool is directly in contact with the tool tip related to the processing size, and the value size is measured and the output signal is output, so the accuracy is higher than the average value obtained by the conversion of light quantity and electricity quantity by laser and electric way