Product features:
1.The product is made of high quality PCB material, stable performance, quality assurance
2.Product miniature design, very beautiful, simple and easy to use, power on that is bright
3. Suitable for installation of various types of LED flash ambient occasions, holiday lights string lights, Christmas lights decorations, vehicle taillight warning instructions, car ambient light, road construction and maintenance warning instructions, advertising patterns flash word plates, star chasing name plates, and so on The need to use the flashing light function of the occasions
4. Five modes are available: breathing light mode, 1Hz slow flash mode, 3Hz fast flash mode, key click mode, key self-locking mode.
5. Maximum 6A or less, maximum power 72W.
Product parameters:
[Product Name]: Multi-functional flashing lights / breathing lights module
[Input Voltage]: Input DC 3-24V universal
[Output Voltage]: Equal voltage output
[Wiring port]: V + V - for the DC voltage input, LED + LED - (L + L -) for the output of the load connected to the light source end.
[Load power]: Maximum 6A, maximum power 72W
[Work mode]:
1, breathing light mode: fade out and light breathing ambient light
2, 1Hz slow flash mode: 1 second slow flash, 1 second flash, 1 second a beat can be used as timing
3, 3Hz fast flash mode: 3 times per second, 1.5 seconds between flashes
4, Key Tap Mode: K connects to the key, press the key to turn on the light, release the key to turn off the light.
5, Key self-locking mode: K connects to the key, press the key once, the light turns on, press the key again, the light turns off.
-, Breathing light mode: 3H short or not connected
-, 1Hz slow flash mode: 1H shorted (tin shorted or paste 0-10KR resistor can be)
-, 3Hz slow flash mode: 2H short (with tin short or paste 0-10KR resistor can be)
-, key tapping mode: 1H bit and 2H bit common shorting (with tin shorting or paste 0-10KR resistor can be)
-, Key self-locking mode: 1H position and 3H position common shorting (with tin shorting or paste 0-10KR resistor can)
Product Notes:
1, the board for DC constant voltage mode of operation, when connected to the LED light source must be strung resistor current limiting, otherwise the input will maximise the output, accelerate the light source light failure.
2, the board with input reverse protection, no output short-circuit protection, pay attention to check the wiring is correct and then powered on the work.
Shipping list:
Module*1 (according buyer choose)