ANCEL FD500 All System OBD2 Scanner For Ford /Lincoln 

【Full Systems for Ford /Lincoln】 This OBD2 scanner for ford is capable of reading and clearing trouble codes on all available systems, including Engine, ABS, SRS, Transmission, HVAC, 4WD and MORE! It is a professional diagnostic scan tool specifically designed for Ford Group vehicle owners and repair shop. 

【Multiple Special Functions】 Ancel FD500 code reader for ford contains main special Function for Ford Group Vehicles, including Throttle (KAM) and Oil Reset, Electronic Parking Brake (EPB) Maintenance Mode, Battery Registration. (It can help you register a new replaced battery witch have the same parameters, such as original battery, same type plus same or big capacity battery as original.)

【Full OBD2 Functions For All Vehicles】This scan tool for ford include read and erase codes, I/M Readiness, read data stream, battery volts test, and vehicle information for all cars that have obd2 16 pin socket.

【Great Compatibility for Ford】Compatible with most Ford Group vehicles (ford, Lincoln, Mercury) after 1996. Include Edge, Ecosport, Ecort, F-150, F-250,F-350, F-650, F-750,MKC,Blackwood, Zephyr, MKZ, Montego, Milan, Cougar.If you are not sure whether it can work on your car, just feel free to contact us. : )

【Life-Time Free Update】 With FD500 Ford obd2 scanner, you can enjoy 1 year warranty and Life-Time Free software upgrade .

All System Diagnosic Scan Tool for Ford/Lincoln/Mercury Vehicles

1.Four Main System: As the most common Trouble Codes come from the your Engine ABS SRS and Transmission ,This Ford code read can help you fix this Main problem, always keep your car in health condition.

2.SAS System:The steering angle sensor (SAS) determines where the driver wants to steer, matching the steering wheel with the vehicle's wheels,Our FD500 Ford Full diagnose tool can read and clear the fault codes of the SAS (Steering Angle Sensor) when the SAS MIL light illuminates on the dashboard. Please be noted that it doesn’t contain the SAS calibration function.

3.Headlight System:Diagnostic the condition of your headlight or called Headlamps,let you drive through dark tunnels, or low light parking garage without worry about the light will turn off Suddenly.

4.Audio System:Diagnostic your audio on your car,if with problem,just fixed it so that you can enjoy better sound all the time.

5.Immobilizer System:With the help of Immobilizer System, you can keep your car safe, secure and prevent it from being stolen.

6.4WD System:Help you monitor the condition of your Four-wheel drive (4WD) which is designed to send torque to all four of a vehicle's wheels to increase traction when needed.4WD might be the better choice for those who live in remote areas, need to work in extreme weather conditions, or enjoy off-road adventuring.

7.EKPS System: The electronic fuel pump control module (EKPS ) controls the fuel pump.EKPS module can fail to cause no start problem or cause issues under hard acceleration. Our Ancel FD500 Ford obd2 can help you erase the fault code.

8.HVAC System:Read and Erase any air-conditioning codes,Some issues relating to how the vehicle runs that could affect HVAC performance.

9.Window System:Help you to diagnose your window issue on your car and Protect the your property from being stolen.

Notice : Each car model has different configurations, the system functions and special reset may vary. But Usually your Ford will support more than 4 special functions.

Muti-Special Functions for for Ford/Lincoln/Mercury   

1.KAM (Throttle Adaption) Reset:The carbon deposits and impurities will affect the accuracy of the throttle if it has not been cleaned for a long time. And the air containing impurities may enter the combustion chamber and affect the normal operation of the engine.If you cleaned a throttle, remember to reset the codes, otherwise the car computer memorized the opening when there is carbon deposits, and caused engine unstable idling and excessively high speed.

2.Oil Reset:Check the oil at regular intervals, and have the car serviced regularly. After draining the oil out of the engine, our FD500 Diagnostic code reader scanner for car can help you to reset the Oil service lamps on the instrument cluster.Furthermore, while changing your oil early might keep your vehicle’s parts fresh, which also good to the air.

3.EPB Service Reset:Electrical Parking Brake is a technology that realizes parking brake by electronic control.If your parking brake fails, you need to fixed the problem by Retracts calipers for brake pad replacement, and move back calipers after servicing to the original position.Our FD500 scan tool can help you complete the repairs after replacing brake pads or servicing calipers.

4.BMS Reset:Battery Registration (BMS) function lets you register new replacement battery that have the same parameters on your car,( such as original battery, or same type with same or big capacity battery ), clear faults from the dashboard and display current battery details of your Ford/Lincoln/Mercury after you replace your old car battery.Our Ford battery Registration tool is happy to assist you and get you back on your way.

OBD II Functions  

1.Read and Erase Code:This Car Code Reader Allows you to Read and Erase Code for all Cars,Not Just for Ford Group Vehicles.
Battery Volts Test:allows you to test your car battery volts.

2.Live Data Stream: Reading the car data stream can detect the working status of the various sensors of the car, set the runing data, you can learn and know much better of the ABS, SRS, Engine, Transmission system, so it will show you the current working conditions.

3.I/M Readiness: Which also means Inspection/Maintenance, ANCEL FD500 diagnostic code reader for ford will reflect the currenct status of diagnosis. (OK=Complete,N/A=Unvailable,INC=Test's not ready)

4.Vehicle Information: Offering the related info of the vehicle such as VIN, CALID, CVN...
Notice: Each car model has different control Module, the system functions and special reset function may vary. But Usually your Ford/Lincoln/Mercury will support more than 4 special functions.

Battery Voltage Check and Battery Registration-Step by Step

How to register a battery with this battery registration tool for Ford/Lincoln/Mercury ?

BMS Reset: In fact, it’s much easier than imagination. Here is the process step by step for your demand of Battery Registration:

1. Remove old battery -Install new battery,and make sure it is well connected with your car.

2. Igintion on (key on),engine off .

3. Check the dashboard and confirm it is in a diagnostic mode.

4. choice the BMS function,follow the notice and process step by step to register new replacement battery.

Please note that, ANCEL FD500 battery registration function for Most Ford Group vehicles and only can be used to register battery with the same parameters.such as original battery, same type with same or big capacity battery.

How do I know if my battery needs to be replaced ?

BAT: After the BAT, you will know your current voltage of your battery. It can be done with FD500 BAT function on the main menu. Test it when a vehicle is power off over a week.The discharge voltage of a normal battery is about 12V, the starting voltage is generally 12V, and the charging voltage is about 14V. Our technical team recommends that you monitor your battery and replace it if the battery is not in good condition.

ONE. 10.8V Before Starting- Too Low, change battery, or may be unable to start. Two. 10.8V-11.8V Before Starting- Slightly Low, difficult to start, please turn off other electronics and start to charge. Three. 11.8V-12.8V Before Starting- Normal. Four. 12.8V-13.2V After Starting- Too Low, might be unable to charge the battery, please check other electrical load. Five.13.2V-14.8V After Starting- Normal. Six. 14.8V After Starting- Too High, may damage battery, please check engine stabilizer.Notice: Readings may have ± 0.1 V deviation

Multi-Language:

English, French, German, Spanish, Russian, Portuguese, Swedish, Finnish, Denish, Norwegian