NRF24L01+ 2.4GHz Wireless RF Transceiver Module for Arduino

The nRF24L01+PA+LNA 2.4GHz RF Wireless Modules are RF transceiver modules that can be used for wireless communications at up to 1100 meters.

These modules operate the same as the standard nRF24L01+, but it adds a power amplifier and detachable antenna to give it an extended range of up to 1100 meters vs the 100 meters of the standard nRF24L01+. The maximum range will vary depending on data rate chosen and on whether there are obstructions to the signal.

The modules operate in the 2.4GHz band at data rates of 250Kbps, 1Mbps or 2Mbps. Max operating current is < 115mA.

The module can use up to 125 different channels spaced 1Mhz apart which cover the frequency spectrum from 2.400GHz to 2.525GHz. This gives the possibility to have a network composed of up to 125 independently working transceivers. Each channel can have up to 6 addresses, or each module can communicate with up to 6 other modules at the same time. Networks can be configured as Star and Tree networks.

The module operates at 3.0V – 3.6V, but the I/O is 5V tolerant, so it can be directly connected to a 5V Arduino or other microcontroller without using any logic level converters. The module power cannot be driven off the 3.3V power pin as the power draw is more than that pin can safely handle. It will need a separate 3.3V source or it can be used with our adapter module below which takes 5V in and has a built-in 3.3V regulator. The adapter also provides pin-out labels, power LED and power supply filtering.

  • 2.4GHz Operating Band
  • 1100 meters Operating Range
  • 125 RF Channels
  • 250Kbps – 2Mbps Data Rates
  • 3.3V Operation

Postage policy

We only ship to your registered address so please make sure it is up to date.

Returns policy

We accept returns for any reason! Our goal is to always provide 5-star customer service. If you are not fully satisfied with the product you receive or our service, please contact us and we will strive to meet your expectations.

If a return is necessary, please initiate a return through eBay's return system and we will issue you a refund upon receiving and inspecting the item. Items must be returned in the same condition in which they were sold. New items must have tags still attached. To be eligible for a return, the return must be initiated and the item should be posted within 30 days of receiving the item.

If you have any issues, please contact us before leaving feedback. Thank you for your business!