Quantity | Four (4) Pieces |
Spacer Thickness | 1.5" (38mm) |
Center Bore | 108mm |
Vehicle Bolt Pattern | 5x5.5" (5x139.7mm) |
Wheel Bolt Pattern | 5x5.5" (5x139.7mm) |
Thread Size of Studs/Nuts | 12x1.25 |
The vehicles in the above Compatibility chart are for reference only.
If you have any questions about fitment or any item specifications, don't hesitate to contact us.
See Important Notes section for additional information.
Your vehicle may have different thread pitch wheel studs than what is supplied with the spacers in our listing. If this is the case, you will need to purchase the correct
cone seat lug nuts for proper installation.
If vehicle's wheel studs are longer than 1.5" (38mm), the wheel studs either need to be trimmed or replaced with shorter ones.
Buyer must take careful measurements to ensure this 1.5" (38mm) spacer is compatible with their wheels/tires. They must make sure it will not push their wheels or tires out too far as to cause it to hit their fender or any other part of their vehicle.
Installation should only be performed by a trained professional with sufficient knowledge of your vehicle and these items
No Returns / Exchanges after installation.