Specification:
Model: AK-KB1301A - Color version
Material: Plastic
Colors: black red, white, white black, white red, white gray, white blue (optional).
Working frequency: 433M
Number of keys: Four keys
Type: Wireless remote control.
Applicable: such as electric telescopic door remote control, gate remote control, alarm remote control, etc.
Rated voltage: 12V 27A.
Wireless transmission distance: 50-150 meters. (Open Space)
Size: 68 * 16 * 15mm/2.68 * 0.63 * 0.59in
Weight: 22g

Clone chip type:
2260 (PT2260, SC2260, LX2260, HX2260); 2262, (PT2262, SC2262, LX2262, HS2262, HX2262), PT2264, PT2240 (LX2240), 1527 (EV1527, HS1527, HX1527), FP527, CS5211, SMC918, SMC926, AX5026, AX5326-3, AX5326-4 HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F629, PIC16F630, etc. Different chip manufacturers have different prefix chip models, as long as the digital part of the chip is the same model.
Note: We usually do not recommend copying rolling code chips because there are many uncertainties when copying rolling code chips. When copying the scroll code chip remote control, it is not possible to determine whether the original remote control chip is an encryption chip. Therefore, we do not recommend copying the scrollcode remote control.

Usage steps:
1. Clearing: press the unlock key and Lock key with two fingers at the same time; The LED light quickly flashes 3 times in about 2 seconds; Release one finger (the other hand cannot be released), then use the loose finger to quickly click on the loose button three times until the LED light flashes quickly; Two fingers can be released; Then press any key on the remote control; When the LED light goes out, it indicates successful code clearing (all four buttons are empty); If the light remains on after pressing any key on the remote control, it indicates that the original code has not been successfully cleared. You need to clear the code again, and cloning can only be successful if the code is cleared successfully. You can repeatedly clear and clone the code.
2. Copy: Hold the original remote control in your left hand and the cloned remote control in your right hand, with the two remote controls as close as possible; Press the first button of both remote controls simultaneously; After about 2 seconds, the LED light flashes quickly twice; After one second, the indicator light continues to flash, release your finger; After successful learning, press the key again, and the light remains on, indicating that the first key code on the original remote control has been copied to another remote control; The same method can be used to open the second key, the third key in sequence... If the copy is successful, the remote control function will be the same as the original remote control.
3. Recovery: When you accidentally clear the copy of the remote control code, you can press the copies of the two keys at the bottom of the remote control at the same time. The LED light will quickly flash, and after pressing any key, it will release and remain on for a long time, indicating that the remote control code has been restored. Before using our copy remote control, please make sure to remove the existing code from the remote control.
How to handle situations where some buttons can be controlled while others cannot? You can use clear and restore operations, as follows:
(1) Clear the code first;
(2) After clearing the code, copy the unsuccessful keys again, and the remaining keys do not need to be copied;
(3) Then clear the code again;
(4) Recovery code; At this point, the original key that was not successfully copied is now overwritten by the new code, while the original key that was successfully copied is now retained. If the key is not copied after the second replication, repeat the above steps until all keys are successfully copied.

Preventive measures:
1. The prerequisite for selecting a remote control is that the original remote control functions normally, the remote control chip is the same or compatible, and the remote control operates at the same frequency.
2. The remote control can only copy fixed codes, learning code chips, and some microcontroller remote controls (see replicable chip models for replicable chip models).
3. Two way remote control, rolling code remote control, and microcontroller encrypted program remote control cannot be copied. For example, HCS200, HCS201, HCS300, HCS301, etc.
4. Before copying the remote control, please ensure that the existing password on the remote control has been cleared and check if the password has been successfully cleared. Otherwise, it cannot be copied.
5. Please ensure that your remote control has sufficient power, and the farther the distance between the two remote controls, the better! If the replication distance is too close, switch to different angles for replication. Press and hold the button on the original remote control to send the signal completely normally, then press the button on the remote control to ensure that the function is fully replicated

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.