Features:

*1. [2 in 1 Design with Reliable Quality]: Handheld 2 in 1 dual channel digital fluorescence oscilloscope signal generator. As an oscilloscope, it has 180MHz-3DB analog bandwidth and 500MSPS real-time sampling rate. Built-in 20MHz DDS function signal generator with 14 kinds of standard function signals, output amplitude fixed at 1VPP, sinewave frequency up to 20MHz, other waveform frequency up to 10MHz.

*2. [Digital Fluorescence Display Technology]: 2.8-inch IPS display with clear definition, color temperature display and multi-level grayscale display capability; waveform changes can be clearly seen in one minute.

*3. [50000wfms/s Waveform Refresh Rate]: Better capture the signal so that there is nowhere for abnormal waveforms to hide.

*4. [Accurate Real-time Trigger System]: With complete trigger function, automatic, single, regular three trigger modes; rising-edge trigger mode, falling-edge trigger mode.

*5. [Adaptive Adjustable Trigger Suppression]: Adapts high-frequency, low-frequency, and high-noise signals for clean, stable waveforms.

*6. [Large Time Base Scrolling Mode]: In scroll mode, slow level changes can be monitored in real time.

*7. [ZOOM Scaling Time Base]: Provide an additional amplification time base. It can provide 2~1000 times amplification view effect in running or pause state.

*8. [Digital Fluorescence XY Mode]: Support digital fluorescence technology, dual-channel generate a closed curve graph can be used to compare the amplitude, frequency, phase of two groups of signals.

*9. [5mV High Sensitivity Ultra-high Waveform Signal-to-Noise Ratio]: The analog front-end uses outstanding shielding measures and a stable feedback system; all parts with sources of interference are located away from the analog front-end.

*10. [20M Hardware Bandwidth Limit]: The analog front end has a built-in switchable 20MHz hardware bandwidth limiting component, and the -3DB attenuation bandwidth is 20MHz when turned on.

*11. [Special Truncated Output Function]: Intercept part or all of various signals measured by oscilloscope to be used as output signal of signal generator, up to 500 custom signals can be stored.

*12. [400V High-voltage Burn-in Protections]: The analog front-end input stage is designed with high-voltage resistance, and the overall design can achieve 400V burn-in resistance in any gear.

*13. [Built-in Rechargeable Lithium Battery]: Built-in 3000mah high-capacity rechargeable lithium battery, up to 4 hours of life, can be set from 5 minutes to 2 hours of timeout time, support 5V/2A quick charging.

*14. [One-Button Auto Adjustment]: Manual cursor measurement, equipped with efficient one-key auto adjustment function, signal measurement is easy and fast; cursor accurate measurement of waveform parameters.

*15. [FFT Simple Spectrum Display]: Qualitative overview of the current signal spectrum components.

*16. [Waveform Saving Screenshot Saving]: Built-in 120Mbit storage space, up to 250 sets of waveforms and 90 screenshots can be stored, you can view full-screen imagings and secondary analysis of the stored waveform data.

*17. [Firmware Upgrade & Imaging Export]: Connect to computers via USB cable, copy the system imaging file iso to U disk for upgrade, also you can directly view or copy the saved BMP imaging file inside the oscilloscope.

Description:

*1. Material: plastics

*2. Language: English, Russian, Portuguese (optional)

*3. Battery: 1 * built-in 3000mAh battery (included)

*4. Number of Channels: 2

*5. Analog Bandwidth: 180MHz

*6. Maximum Sampling Rate: 500MSPS

*7. Input Coupling: DC/AC

*8. Rise Time: 1.8nS

*9. Storage Depth: 120Kpts

*10. Input Impedance: 1MQ-18PF

*11. Vertical Sensitivity: 5mV~10V(1X)

*12. Time Base Range: 5nS~50S

*13. DC Accuracy: ±2%

*14. Time Accuracy: +0.01%

*15. Trigger Architecture: digital trigger

*16. Trigger Mode: auto/single/regular

*17. Trigger Edge: rising edge/falling edge

*18. Test Range: 40mV~80V(1X)

*19. Screen Storage: 90 sheets

*20. Interceptwave Signal: 500

*21. Interceptwave Outputter: supported

*22. 20M Hardware Bandwidth Limit: supported

*23. Cursor Measurement: frequency/period/amplitude

*24. ZOOM Scaling Time Base: supported

*25. Digital Fluorescence Yechnology: supported

*26. Adjustable Automatic Bandwidth Limiting: supported

*27. Color Temperature Display Technology: supported

*28. Scrolling Mode: supported

*29. X-Y Mode: supported

*30. Auto-adjustment: supported

*31. Waveform Manager: supported

*32. High Voltage Anti-burning: all gears withstand voltage 400V

*33. Screen Size: 2.8 inch

*34. Screen Resolution: 320 * 240

*35. Screen Display Process: IPS full view

*36. Expansion Interface: USB transmission interface

*37. Auto Shutdown: 5 minutes ~ 2 hours

*38. Firmware Upgrade: support iso imaging upgrade

*39. Charging Input: 5V-2A

*40. Battery Capacity: 3000mAh

*41. Standby Time: 3~4 hours on full charge

*42. Parameter Measurement: 12 kinds

*43. Signal Generator: 14 kinds of standard function signal

*44. Waveform Storage: 250 groups

*45. Item Size: 135x90x40mm / 5.31x3.54x1.57in

Package Includes:

1 x DPOX180H Digital Phosphor Oscilloscope

2 x Matching 200MHz Probe (1X & 10X）

1 x 5V2A Power Adapter

1 x USB Cable

1 x User Manual