====== Product Parameters ======
Model : DS series
Material: ABS
Supported Capacity: 16TB Single Disk
Output Interface: Type-A USB3.0（5Gbps）
Power Supply: 12V6.5A
Supported System : Windows/Mac/Linux
Material: ABS
Supported Capacity: 16TB Single Disk
Output Interface: Type-A USB3.0（5Gbps）
Power Supply: 12V6.5A
Supported System : Windows/Mac/Linux
======== About this item ========
- 【Tool-Free Installation】 --ORICO DS-series 3.5-inch computer hard drive enclosures designed with magnetic chips on the cover, no screws, and tools needed to help you easily install the hard drives in 3 seconds to save your time and improve your working efficiency. Plug and play, easy to use.
- 【Up to 36TB Large Capacity】-- This USB 3.0 2 Bay external hard drive enclosure supports all 3.5 inch SATA I ii iii hard disks up to 18TB（36TB in total), convenient for enterprise/family data backup and exchange, also a good tools for the NAS expansion. It's an ideal choice for personal storage at home and office.
- 【5Gbps Transfer Rate】--This 2-bay SATA drive enclosure adopts SATA III protocol and supports UASP, connected to USB 3.0 devices transfer rate of up to 5Gbps (MAX). Equipped with a versatile USB 3.0 Type-B interface, it also can connect to other peripheral devices. Compatible with Windows XP / Vista / 7/8, Mac OS X 10.2 and higher & and Linux.
- 【Built-in Double Ball Bearing Fan】--DS-series HDD docking station built-in a 60mm double ball bearing fan on high rotating speed and designed with large-area honeycomb holes in the rear panel， which will effectively dissipate the heat of the inside and reduce the temperature of the hard drives to protect them as much as possible.
- 【Multi-protection 】-- Anti-over voltage, over-current, overheat, short-circuit, leakage, and other multiple protection designs to ensure the security of data transmission of the USB 3.0 external drive enclosure. Four indicator lights help you to monitor the working status of your hard drives whenever.
======== Troubleshooting Guide ========
Q: How do I know if one of the hard drives has failed?
If one of the hard drives is damaged/failed, the corresponding LED will turn red and the hard drive enclosure will emit a warning sound (beep).
Q: How to replace the hard disk?
If you want to replace the hard drive in the enclosure with a new one, or if one of the hard drives is damaged/failed, follow these steps:
If you want to replace the hard drive in the enclosure with a new one, or if one of the hard drives is damaged/failed, follow these steps:
1. Locate the hard drive (bad or to be replaced). Eject the hard drive enclosure from the computer, then power off the hard drive enclosure.
2. Pull out the hard drive enclosure door. First format the new hard drive on another device. Then insert the new hard drive into its original location and open the hard drive enclosure.
2. Pull out the hard drive enclosure door. First format the new hard drive on another device. Then insert the new hard drive into its original location and open the hard drive enclosure.
Q: How do I add new hard drives to the hard drive enclosure?
1. Safely eject the hard drive enclosure from the computer, then power off the hard drive enclosure.
2. If the hard disk you are adding is brand new, please format it on another device. Then insert it into the hard drive enclosure. Do not change the original hard disk order.
1. Safely eject the hard drive enclosure from the computer, then power off the hard drive enclosure.
2. If the hard disk you are adding is brand new, please format it on another device. Then insert it into the hard drive enclosure. Do not change the original hard disk order.
Q: Can I connect the device to the computer through a hub?
We recommend that you connect the hard drive enclosure directly to the computer, as the connection through a hub may be unstable.
We recommend that you connect the hard drive enclosure directly to the computer, as the connection through a hub may be unstable.
✅ If you are not sure about the above questions, you can contact customer service at any time.
Product Description
